TCP IP multi client connection does not work correctly

Similar Questions

• Why my wifi connection does not work correctly?

  I had problems with my computer for a while. The first problem I had was that after I hibernated my computer it would be even not show me internet connections. I discovered that the hibernation of the computer can sometimes cause this problem. A little later that I realized that even when the computer had not been put into hibernation for weeks sometimes started upward with the same problem. He said networks is not available and there is a red cross on a box where my wifi bars should be. I had to reboot my computer up to 5 times to get the bars will appear. When he did not connect to all pilots and equipment I need to connect does not even appear in the control panel. The other times where it worked the drivers were all there. I don't know yet how this can happen. The other computers in my home connect very well and are able to interact with each other at high speed and get internet just fine.

  Recently, I lost any connection even when I rebooted my computer 10 times it doesn't.

  I came across a thread that told me to access prompt as administrator and type in this

  netish int ip reset

  I was able to connect to my network now, but he says no access to the network or Internet. I also tried typing in this...

  ipconfig/flushdns

  now I can access the internet and communicate with other computers. I tried to play Minecraft while my friend was the host through the router, but the connection was so slow that it was as if I was looking at the past in slow motion. I crossed several times and abandoned. The internet is too slow. It's like I'm on dial upward, but it should be high speed, I don't know what the problem is. What else I can watch on my computer to help me solve this problem? Should I restore it to factory settings? Or is something broken?

  Hi Veronica,.

  Thanks for the reply.

  Sorry to hear about the inconvenience caused.

  According to my understanding, you are having trouble with internet connectivity.

  You upgrade windows or what was the first operating system installed on the computer?

  This problem is mainly due to drivers get damaged.

  To rectify the problem, you will need to uninstall the current network using Device Manager drivers and install the latest drivers from the computer manufacturer site.

  Please refer to this sub article, which will guide you to uninstall the drivers using the Device Manager:

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553572%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  To download the latest drivers from the computer manufacturer site, see the link below:

  http://www.ASUS.com/in/supportonly/U56E/HelpDesk_Download/

  Hope this information helps, for assistance please answer.

• In windows Vista (Home Premium) Remote Desktop connection does not work correctly

  I installed and re-installed my Vista (Home premium) 2 times already because of the remote desktop connection.  I have a problem connecting from another laptop running windows 7 to connect to my desktop running Vista.  The remote control works on the other hand the meaning of desktop running vista, laptop running windows 7 Professional.
  Looking at the Vista under \System\Remote setting\Remote tab which shows the remote assistance box, but the Office box where you can choose what type of connection can be established remotely is missing.

  I went though all as responses to forum, but nothing helped.  Even in a "sfc/scannow" command prompt running did not help.  It is said that he finds corrupted files, but it cannot solve all corrupted files.  That's why I reinstalled windows hoping to fix this problem but WITHOUT SUCCESS.

  Can anyone help?  I've attached a screenshot of what I see in vista.

  You can connect FROM an original version of Windows to another computer, but you cannot connect to an original version of Windows.

  It is not an 'idea' it's hard cold fact that is at least 12 years old.

• My phone does not work correctly

  My phone Bluetooth, Wi - Fi and GPS connection does not work correctly. Bluetooth and wifi have the low range of connection and can barely connect what either. GPS won't work at all, so I can't use it for direction more.

  Take it to an Apple store for diagnosis.

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Socket connection does not work with SIM network

  Hi all

  I created a socket connection. It works fine when I use the WiFi and iam able to download the data and get a correct answer successfully.   But when I use the network GPRS/SIM I get "Unauthorized response" as an answer. I already check with the default blackberry, here internet browser works very well.

  Can someone tell me why socket connection does not work when I use the SIM card network.

  If anyone knows about internal or the following BlackBerry setting that also tell me

  "Option-> advanced-> TCP Option.

  Thank you

  Neeraj Chauhan

  Thanks Peter,.

  For your support... Now my application works very well in both cases (SIM and Wi - Fi network). So I close my ticket.

  Thank you & best regards

  Neeraj Chauhan

• Satellite C70-B-306 - local network connection does not work

  Hello

  I have a problem with my internet connection, Wi - Fi works fine but when I put the cable with connector rj45 of the connection does not work.
  I see that my laptop want to connect but then the connection is lost again en it says cable is not connected. Who goes on and out.

  It passes between the cable and internet Wi - Fi connection. The cable worked fine on my desktop.
  What can I do? I have the laptop 1 week.

  René

  Hello

  What model of laptop do you have? Do you use the laptop with the original operating system preinstalled?

  Open Device Manager and check if the LAN CSA is listed and enabled correctly.

• Excite PRO 3G connection does not work after last update Android v4.3

  Hello

  I live in Italy and last Sunday (26 January) my excited PRO Tablet (model AT10LE - A - 10 H) received version Android 4.3.201121220.35.

  After restart my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  My sim card is ok. I used this sim card before the system update and I don't have a problem with Android 4.2.2.

  Please help me.
  Thank you

  > After reboot my wifi works fine, all other app very well work, but my 3g connection does not work, mobile bar is empty and it says "no service".

  Go to mobile network settings and search again for the 3G network.
  I had a similar problem with my Android Smartphone and my o2 provider
  I started to search for new, so I chose the O2 again and then I could solve the problem.

  In the case where this does not work for you, recommend you to reset the default Tablet (factory settings)

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Config Free - Connectivity Doctor does not work correctly

  Hi all

  yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...

  The details are
  AppName: cfmain.exe AppVer: 5.0.0.119 ModName: venapi.dll
  ModVer: 5.0.0.3 Offset: 000034df

  Thank you very much for your support

  I found this:
  cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.

  Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• I have an Apple computer, use the browsers Firefox and Safari, use Comcast for my email. Lately, when the Firefox, my email does not work correctly. Why?

  I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Poloroid MP3 does not work correctly.

  Original title: connect a MP3 player to the poloroid mp3 files

  Sorry for the caps, my problem is I just got a Poloroid MP3 and it does not work correctly as no movement between the icons etc. Y at - it anykelp like a download or something I can put it on its feet again. Thank you very much

  Gary lumbard... e-mail * address email is removed from the privacy *.
  

  Hi Gary lumbard,.

  Thanks for posting your question in the Microsoft Community Forum.

  According to the information of Polaroid MP3 player does not work on your Windows XP computer.

  Since you are faced with the question with player MP3 of Polaroid, you can get in touch with ato Polaroid supported if verification updates is available for the player and for further assistance.

  Polaroid support

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• spell check does not work correctly. It highlights each word

  my spell checker does not work correctly. When I send a message it highlightes, virtually every word and all are spelled corectly - help please

  You use Outlook Express when you see this? Office Word 2007 or 2010 is installed?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.