Why my Win Serv 2012 std (hp ROK) do not settle on my 5.5.0 esxi?

Similar Questions

• Upgrade Windows Server 2012 Std to 2012 Std R2 with the same license

  I have an activation key for windows server 2012 Std, can I upgrade windows server 2012-2012 Std R2 with this key? Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Program running as an administrator in Win Server 2012

  Hello

  I installed Win Server 2012 on my hyper-v virtual machine. I installed the trial version of Statistica software there. When you run the trial version, should be the admin right otherwise, he asks for the license. When I run the program in Win 7 or 8 win as an administrator, there is no problem and I can use it. But when I tried in 2012 WS, it didn't work. I don't even have dialogue if I want to allow the program to use the admin right. So, my thought is that, even if I run as administrator, it does not run as administrator. No doubt some WS 2012 policy. Does anyone have an idea what to change here so I can run as an admin, as in Win 7 or 8 Win?

  Thank you.

  Hyper-v on the server 2012 forum is here. http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

• Installation of Win Server 2012 9 desktop problems

  I have a 64 bit Windows 7 with 9 Workstation installed host computer.

  I am trying to create a virtual machine for Win Server 2012, but I get a license error.  There are other posts on this topic, but it relates to the work station 8.  I tried the solutions in these messages, but I still have a problem.

  I downloaded the ISO file using Internet Explorer twice.  Once I used the ISO to create the virtual machine and once I burned the ISO to a DVD and tried.  It always gives me this error when installing:

  "Windows cannot find the Microsoft software license agreement.  Make sure that the installation sources are valid, and restart the installation. »

  The problem is that I tried the installation of 5-6 times and I can't spend.

  All the world did this with success?

  Thank you

  Stem

  Try this:
  When you create a new virtual machine
  -Choose the option: I'm going to install the operating system later. (The virtual machine will be created with a blank hard drive.)

  Do not type the path to the ISO file

  -After the creation of new virtual machine also set the path to the ISO file (VM / parameters / CD-DVD.../Use ISO image file)
  -After the execution of the new VM to install automatically saved (if not run probably on purpose = error)

• I lost the installation media for windows server 2012 std

  I lost the installation media for windows server std 2012, but I have the key. where I can download the media.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Port forwarding for EYEMAX DVR on WIn Server 2012

  We use the router as a network controller on our local network. Now, we have replaced router with the server (win 2012 r2 essentials). We have an EYEMAX DVR client software to connect to a remote ip address in the web.

  Previously, I had the configuration of port forwarding router and EYEMAX was working. When we replaced the router with a server that I can no longer connect. I guess that there is a similar setting to perform on a server, but I can't figure out what to do. This certainly isn't a Firewall (when I turn it off EYEMAX still do not work).

  There is a statement (http://site.camtechsurveillance.com/downloads/remoteacc.pdf) how to configure a router to work, but I do not know how to apply similar changes on the server.

  TL; DR.

  How to do the same on the server like here http://site.camtechsurveillance.com/downloads/remoteacc.pdf

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• OMSA on windows server 2012, "Execute the application" does not not under alert management action alert

  Hello, please help

  I'm working on this guide: xyfon.com/.../setup-email-notifications-dell-openmanage

  It works for my windows 2003 server with open handle to this topic. But I'm unable to open manage to send an alert to a system windows 2012. It works in command line, but not the part of absolute path 'Execute the application' the management of alerts. I tried all the suggestions in the thread. Anyone know if this works for the win2012 or how to make it work?

  Thank you
  Fred

  Ah, in fact it seems that it may work now. Have to do with how I was testing the temporary disability or maybe I have changed some things between tests. I tried a few times over, and it seems to have triggered the email which will now be sent

  The absolute path to the application, I used is:

  C:\DellSMTPNotify\DellSMTPNotify.exe 3

  without the quotes around it.

  Thank you

• S110 and PE T320 RAID 10 catastrophic disk subsystem performance - Server 2012-

  Ordered nine T320 with 4 500 GB SATA (Dell/WD) configured drives in RAID 10.  Server 2012 Std.  32 GB OF RAM.

  I had good performance of the T110-II and 4 similar drive RAID-10 using the S100 remote, but the difference is day and night between the S100 and the S110.

  I reinstalled several times in different configurations to ensure it was the S110 which was the issue.  Using the latest version of CrystalDiskMark (3.02f) here is the approximate number, I see sequential reads/writes.

  T110-II w/S100 and 4x500GB RAID 10-220 / 215 MB/s.

  T320 w/S110 and 4x500GB RAID 10-50 / 45 MB/sec with cache configured no read ahead and write through.

  T320 w/S110 and 4x500GB RAID10 - 60 / 52 MB/s with configured cache read-ahead and write again.

  T320 w/S110 and 2 x 500 GB RAID 1 - 50/45 MB / s

  T320 with disabled S110 and just running a single 500 GB drive in SATA AHCI mode.    135 / 133 MB/s.  It's what I expected a same WD/Dell 7200 RPM drive.  No problem with the SATA AHCI standard.

  This isn't a software vs hardware RAID question.  As I mentioned, I get massively on a T110-II with S100 in RAID 10.

  Dell - I can't believe that you are shipping something as bad.  My preference is to understand why he is so bad and solve the problem, but if I don't get answers soon, that the server will be going back to Dell.  The server as it sits now is unusable.  I'm 10 years old, sitting in my pile of recovery servers that perform better than that.

  [ADMIN NOTE: profanity removed by TOU] Reference Dell?

  Info on CrystalDisk Mark can be found here:

  http://CrystalMark.info/software/CrystalDiskMark/manual-en/MainWindow.html

  the numbers are sequential 512 k / qd1 for the values that I listed in my initial post.

  What started me on this has been the new server was extremely slow during installation and configuration.  Then, I tried a few markers of disc and they all showed extremely poor performance.  I have listed CrystalDiskMark numbers because it is widely known and used in the comparative analysis.

• Error update Win Server Standard 2012R2 8004FF04

  We are a small organization without in-house COMPUTER staff.  We have a Dell T410 Win Server 2012 R2 Standard Server.  Tried to install Win Update 4.9.218.0 (3140527 KB) - failed twice.  Since then have found http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/vista-update-492180-kb-3140527-for-security/9b1b57bf-a9c2-4ce5-9590-5e8ff7d8631e, which suggests that the update is incorrect.  What is recommended?  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Disabling RDP to the server 2012 iPad

  I Win Server 2012 Standard with gateway desktop remotely installed, configured and works perfectly. However, it seems that the security certificate is worthless for an iPad or Android user. I can successfully remote on the server and all workstations on the network from my iPad with no problems - and there is no security certificate installed on my iPad. Doesn't seem very 'secure' for me. How I can solve this problem (assuming that it is still possible) so that no ONE can remote in without the property security certificate installed? I note that when accessing remote from a windows machine, it doesn't let me connect if I do not have the certificate installed, and there is not a derivation device type. However, with my iPad, I can bypass the need for a certificate, and I don't want that. I suspect it's a kind of change I need to make in IIS. Thanks for anyone who can help.

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows server 2012 licenses after you have reinstalled

  Hello

  I installed and activated a server win 2012 standard within a VMware virtual machine. I need to reinstall it.

  My question is if I reinstall in the same VM, Microsoft it will consider a new "machine" and require a new license?

  Even more, if I install win server 2012 directly on my physical server, IE. No VMware, virtual machines etc., Microsoft will consider a new "machine" and require a new license OR is it true that the license is tied to the physical server CPU and so there is no problem with the activation of the server (with the same license).

  the license that I use is "Volume_Mak".

  Thank you

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Install windows server 2012 Poweredge 1950

  I try to install Win server 2012 on a server Poweredge 1950 create a bootable USB drive and a DVD but does not work anyway, I follow several web options like boot installation for USB and CD boot process, but no matter what I do on the USB port, just to hang and will jump with the DVD , he wont even try to read it.

  Any help is very appreciated

  Try to start the USB on another machine. If you browse the content of the flash player, you should have some files (sources, etc) and a few files (setup.exe, etc.). Have you followed the instructions of preparation USB EXACTLY as I statements?

• How to configure the VM of Windows Server 2012 to use a replacement storage adapter

  Hello

  I want to install Win Server 2012 assessment on the 11.0.0 Workstation assessment. But there is a problem:

  

  And according to this article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2059549

  It seems that I need to configure to use a replacement storage adapter. But I can't find a relative configuration on my workstation.

  Best regards

  A download cannot certainly be corrupted, even if it seems normal... The only way to be sure is to compare the size of the file and checksum of the file MD5 or SHA1 against those reported on the download site.

  If you have verified the integrity of the file on the source and it still does not work, please send the file vmware.log of the directory of the virtual machine as an attachment and I'll take a look.  To attach a file, look for the Browse... button when you compose your answer... it'll be just above the key Message Post - please do not copy - paste in a response.

  Thank you

  --

  Darius

• Implement the deployment of Machine virtual Windows Server 2012 with a data Bit Locker encryption?

  Hi all

  Is it possible to implement the feature data Bit Locker encryption on my Virtual Machine to Windows Server 2012 Std on the Platform VMware ESXi 5.1 vSphere update 1 ?

  The hypervisor is currently running on servers HP Blade BL 460 c G8 . Read well the hardware specification: http://h18001.www1.hp.com/products/quickspecs/14208_na/14208_na.pdf I see that he has taken a TPM installed on the blade, but I don't know how to make sure that it is activated or used by the Virtual Machine?

  Any kind of help would be greatly appreciated.

  Thanks in advance

  I had a few goes at it and it's not like you can virtualize a TPM. It would make sense if it was the case - the secure TPM was not designed to manage multiple instances of the OS.

  I ended up making USB passthrough on a USB stick and have the Bitlocker key stored on this stick as a demo. Certainly not a transaction supported, but it showed that the storage of key seems to be the only issue.

• 6 of WSUS on Windows server 2012

  Hello

  I am trying to configure SCCM 2012 (painfully)
  I get a lot of error messages.
  WSUS does not work: can not synchronize updates.
  wsusservice (in services.msc) will not start (error 193 oxc1)
  If wsus works 50% (you can see some Update Manager wsus on windows server 2012) because some service: do not start WSUSservice and ContentSyncAgent!
  In sccm 2012 config console manager, status of the status/component system, I get a critical error for SMS_WSUS_Control-Manager:
  Failures have been reported on the "our FULL domain name server" WSUS server for WSUS 'ContentSyncAgent, WSUSService' components,.

  Solution: Check that the failing WSUS components are installed and running.
  another mistake criticism for SMS_AMT_operation_Manager:
  The service point of band off unable to connect at the point of registration.
  Our config:
  WindowsServer 2012, sql server 2012, sccm 2012 sp1 on hp proliant Server
  It really painful
  Thank you if you have an idea

  Hello tomy13,

  Microsoft Community is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. As your question is about 6 of WSUS on Windows server 2012, your question would be better addressed in the TechNet for ITPros forums.
  Click on the link here to transfer your question in TechNet in the Windows Server forum.

  Sincerely.

  Marilyn