Why need serial for single sign-on info

Similar Questions

• Structure of security suitable for Single Sign on Server

  We're all used to how design the structure of security for vCenter Server if you had a before 5.1 existing VMware environment.  Who should have administrative privileges in vCenter Server, what roles, permissions and so on should be attributed to the what users and groups - these issues have already been addressed in our current configuration.

  Now Single Sign introduced a significant new of the determination of the issues of access and authentication.

  I would like to have some ideas on how this should be managed.  For example, directors of previous VMware by definition should become Single Sign we're directors? The Active Directory domain administrators now begin to get involved with the SSO on the server?

  For example, the Single Sign on now VMware forces administrators to configure things like:

  -For the SSO password complexity policy

  -Expired password for SSO

  -Locking strategy

  We probably already have these things closely controlled in AD and locked with group policy, but you cannot apply the policy of group directly to a SINGLE authentication server and make it to a GPO in Active Directory.  (You can do Windows SSO running operating system on have a GPO applied, but it will not set up authentication SINGLE itself, just the OS).

  VMware admins are looking at a new set of issues related to authentication and authorization.  Someone must have written something or will write something to help us get the overview of what changes with SSO if anything and how we look at SSO to a safety design and best practices.

  Do I just existing vCenter Server admins admins SSO or do we need to take a step back and reconsider?

  Hello

  In fact, Yes. SSO is strong enough in 5.5. It has some limitations around to send passwords expired, but this is mainly because some people do not use. I use SSO to provide usernames and passwords for all my VMware vCenter and related products service accounts. That is an account for POS, Horizon, vCops, Log Insight, etc.  It's more about the conservation of the once separate systems more with no real need to AD for services. But AD via SSO is used by users.

  Read the documentation and determine how SSO fits in your current password policy and take a long, hard look at your virtualization environment. Y at - it a 1 service-by-service account in dialogue directly with vCenter? If this isn't the case, SSO can help you implement that. The key is to match its functionality to your security policy.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, 2010, 2011,2012,2013,2014

  Author of the books ' VMWare ESX and ESXi in the business: Planning Server Virtualization Deployment, Copyright 2011 Pearson Education. ' Of VMware VSphere and Virtual Infrastructure Security: securing the virtual environment ', Copyright 2009 Pearson Education.

  Virtualization and Cloud Security Analyst: The Practice of virtualization, LLC - vSphere Upgrade Saga - virtualization security Table round Podcast

• Assign roles to users for SINGLE sign-on integrated

  Hi all

  I'm trying to assign roles to users of the SSO, but I can't. I reached this local and LDAP users, but not for users of SINGLE sign-on (I want to use my AD users but without LDAP configuration)

  My platform is vCenter 5.5 U1 for SSO, vCAC camera + server IaaS and vCAD appliance. When you save your vCAD with vCAC you can use integrated vCAC SSO authentication. But, how can I assign roles to users of SSO?

  I can access vCAD with AD users via integrated authentication for SSO, but all options are read-only.

  Best regards

  Jose Luis Gomez

  Hi all

  Auto answer.

  When you have saved your vCAD with vCAC, new roles appears in vCAC. The roles are:

  • Applications architect
  • Request catalogue administrator
  • Director of Cloud applications
  • Deployer and publisher of the application
  • Director of application system

  You can apply this role to users or groups, but always vCAC--> Administration--> groups/users

  Best regards

  Jose Luis Gomez

• More users for SINGLE sign-on

  We recently had an upgrade to vCenter 4.1 to 5.5.  Before, we used the connection to the Windows credentials.  Now, he's using SSO, but there is only the local administrator account.  We do not want 4 admins to open a session using 1 Administrator account.

  According to the knowledge base, I should be able to add other users by going to ' Administration > access > SSO users and groups of in the web client.  But when I go to the Administration, I do not see 'Access' or ' SSO users and groups "listed (see attached image).

  

  Something does not settle the upgrade? Or am I missing something?

  Thank you

  To connect to the web client using the [email protected] account, you will see entries of Single Sign-On in the Administration (i.e. your screenshot), which allows you to create users and you can also add Sources of identity (for example your domain name).

  André

• Do not find the link to download required mentioned in the RFSO for SINGLE sign-on integration

  I implement SINGLE sign on our newly installed R12.1.3 instance. For this I am following note "Integrating Oracle E-Business Suite Release 12 with 10gR 3 Oracle Internet Directory and Oracle Single Sign-On (10.1.4.3) [ID 376811.1].
  Previously I have integrated SSO R12 successfully by following this doc...
  
  
  But now I'm not find (or confused) on the download link for the component 'Application Oracle 10 g Infrastructure. "
  
  In the doc what follows is mentioned.
  
  + "Before starting any further, make sure that you got the following:"
  
  Since the store Oracle or the Oracle Technology Network:
  •CD pack for Oracle Application Server 10g Release 2 Enterprise Edition «+»
  
  
  and in another part->
  
  + Pre-installation task 2: install OracleAS 10 g (10.1.4.0.1) identity management Infrastructure
  If you already have an existing instance of 10g (10.1.2.0.2) OracleAS, skip this step and go directly to the next step of pre-installation.
  
  Complete this task to install 'Infrastructure of OracleAS 10 identity management (10.1.4.0.1) g' for the first time.
  
  This task creates the Oracle Application Server 10 g Enterprise Edition standalone server that will be attached to the Server E-Business Suite. +
  
  
  
  But I'm not finding and confused about software to download and their links to oracle technology. No, the software's component "identity management Infrastructure OracleAS 10 g (10.1.4.0.1)."
  
  Please help me on this matter. and also to mention the download links and components which will install the "OracleAS 10g (10.1.4.0.1) identity management Infrastructure".
  
  [Please note that we will not use "Oracle Access Manager" in the new instance as previous installation was OID. that has been integrated successfully with the customer MSAD.]

  Oracle AS10g version 2 is no longer available on OTN - connect you an SR and ask the Support of Oracle to send the Media Pack - http://www.oracle.com/technetwork/middleware/ias/downloads/101202-095224.html

  For Oracle Internet Directory 10.1.4.3, please see this link:

  Oracle Single Sign-On and Oracle Internet Directory 10g 10.1.4.3 certified with EBS 11i and R12
  https://blogs.Oracle.com/stevenChan/entry/oracle_sso_oid_10143_certified_ebs

  Thank you
  Hussein

• Need help finding my URL to search for SINGLE sign-on service

  I'm trying to join a different vCenter Server to my existing environment of the vCenter and do not know what is the url to the search service. Where can I find out this information?

  Nevermind I got it. http://www.virtuallyghetto.com/2013/12/How-do-i-find-my-SSO-Server-55-site-name.html

• Why is location for AppleID sign near Majura Act?

  Given that the update my iOS 10 phone and allows the authentication of 2 factor that I continue to receive alert notifications saying that my ID Apple is used to connect to a device near a place I'm not nearby. Does anyone know what it is? Or has been similar.

  Ideas appreciated

  < m3 >

  Two-factor authentication Gets the message that a device tries to access your Apple ID account and sends you a message.

  If you are far away where the device attempts to access your account, you can check that your location service is on.

  If this is the case, you can change your password, because it looks as if someone has this location is trying to access your Apple ID account

• Wired 802.1 X. How is single-sign - we implemented on AD environments?

  Hello team:

  I played some time with 802. 1 X on a cable network of catalyst with good results, but still typing (user, pass) combo then disputed by the switch.

  Now, I want to move mainstream, and deploy it to a Windows domain of production with XP end user stations. I need to implement single sign - on: the user/pass entered by the user when he or she connects to the computer must also be reused by the PC to meet the switch when exchanging EAPOL running.

  I have my doubts on this environment. On a normal basis, a PC with XP which is turned takes at least a minute to request user name and password, and I understand that the switch will challenge with EAPOL as soon as the LAN card is turned on (let´s say in a few seconds after that the PC was under tension). Now the questions:

  Do I have to adjust my LAN switch 802.1 X timeouts with this fact in mind?

  What happens if the end user takes a long time (well beyond my expirations of switch) to enter the name of user and password information? The timeout of the switch and switch to alternative methods?

  What is executed first? ¿Validation of the credentials of the user in the AD environment or 802.1 X validation? If validation AD comes first, I apply an ACL in each port of the switch to allow at least the DHCP service and access to the AD server, so that the laptop can take an IP address and reached the advertising for the validation server.

  Any help with my many questions will be greatly appreciated.

  Best regards, Rogelio

  After the authentication of the computer complete, the network connection is open. You may want to ACL to restrict the user to access the announcement; DHCP; DNS, etc. You would need to give sufficient rights after the second dot1x over but then the user needs to access other resources on the network.

  I will attach here the section database user ACS4.2 user guide. Anyway, you can find a similar article on most versions of the Guide to ACS.

• vCenter single sign on - condition password is wrong or empty

  I'm moving my SSO 5.1 U2, but when I ran the wizard and go to vcenter single sign-on info

  Its saying the password supplied is incorrect or empty

  any idea?

  I'm am to connect to the web client as

  admin@system-domain

  with the same password

  Check this blog for how procedures do to recover the password: http://www.ingmarverheij.com/vmware-recover-vcenter-single-sign-on-sso-master-password/

• How to disable Single Sign On

  Hello...
  
  Whenever I call a report that came out a Single Sign On page n request username n password. After giving the report parameter form is open. Until the end of the session the SSO is not burst when I call other reports.
  
  But once the session expires or I have an another open application in another browser application for single sign-on...
  
  Today, when I enter user name n password single sign on it says expired password... When I connect to my database with the same password it works fine...
  
  How to solve this problem...
  
  IAM using oracle 10g Server Linux App.
  
  Please help me as soon as possible...
  
  
  
  with cheers
  Sprity...

  You need to comment on or change the security id in the file reportservername.conf

• Problem with OBIEE/WLS and MS AD Single Sign-On configuration

  Hi all
  
  My apologies if this should be posted in the general forum of WebLogic security rather than here, but given that the Oracle support doc called "+ Oracle BI 11 g and Weblogic for Single Sign-On configuration... + ' I thought I would try this first forum.
  
  We lack OBIEE 11.1.1.6.5 on WLS 10.3.5.0 on Windows 2007 server.
  Active Directory (2008) is running on Windows 2008 R2 Standard edition.
  
  I followed the support document ID 1274953.1 mentioned above and have managed to get the AD authentication works between the OBIEE/WLS server and the MS AD server.
  In other words; We are able to manually restart the BI Analytics with our AD username.
  
  Now, when you try to configure Single Sign On, I'v reached the point where I'm just checking the configuration of Kerberos (page 19-20).
  
  This defective with the following result:
  

  C:\Oracle\..\middleware\user_projects\domains\ourdomain>java.exe -Dsun.security.krb5.debug=true sun.security.krb5.internal.tools.Kinit -k -t keytab [email protected]
  KinitOptions cache name is C:\Users\oracleservice\krb5cc_oracleservice
  Principal is [email protected]
  Kinit using keytab
  
  Kinit keytab file name: keytab
  
  KeyTabInputStream, readName(): OURDOMAIN.LOCAL
  
  KeyTabInputStream, readName(): wlsuser
  
  KeyTab: load() entry length: 44; type: 3
  
  KeyTabInputStream, readName(): OURDOMAIN.LOCAL
  
  KeyTabInputStream, readName(): wlsuser
  
  KeyTab: load() entry length: 44; type: 1
  
  KeyTabInputStream, readName(): OURDOMAIN.LOCAL
  
  KeyTabInputStream, readName(): wlsuser
  
  KeyTab: load() entry length: 52; type: 23
  
  KeyTabInputStream, readName(): OURDOMAIN.LOCAL
  
  KeyTabInputStream, readName(): wlsuser
  
  KeyTab: load() entry length: 60; type: 16
  
  KeyTabInputStream, readName(): OURDOMAIN.LOCAL
  
  KeyTabInputStream, readName(): wlsuser
  
  KeyTab: load() entry length: 52; type: 17
  Added key: 17version: 5
  Added key: 16version: 5
  Added key: 23version: 5
  Added key: 1version: 6
  Added key: 3version: 5
  Ordering keys wrt default_tkt_enctypes list
  Config name: C:\Windows\krb5.ini
  Using builtin default etypes for default_tkt_enctypes
  default etypes for default_tkt_enctypes: 3 1 23 16 17
  Kinit realm name is OURDOMAIN.LOCAL
  
  Creating KrbAsReq
  
  KrbKdcReq local adresses for WLSSERVER are:
       WLSSERVER/10.0.0.2
  IPv4 address
  
       WLSSERVER/0:0:0:0:0:0:0:1
  IPv6 address
  KdcAccessibility: reset
  Using builtin default etypes for default_tkt_enctypes
  default etypes for default_tkt_enctypes: 3 1 23 16 17
  KrbAsReq calling createMessage
  
  KrbAsReq in createMessage
  
  Kinit: sending as_req to realm OURDOMAIN.LOCAL
  Exception: krb_error 0 Cannot get kdc for realm OURDOMAIN.LOCAL No error
  KrbException: Cannot get kdc for realm OURDOMAIN.LOCAL
       at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:196)
       at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:175)
       at sun.security.krb5.internal.tools.Kinit.sendASRequest(Kinit.java:298)
       at sun.security.krb5.internal.tools.Kinit.<init>(Kinit.java:237)
       at sun.security.krb5.internal.tools.Kinit.main(Kinit.java:107)

  Our krb5.ini looks like this:
  

  [libdefaults]
  default_realm = OURDOMAIN.LOCAL
  ticket_lifetime = 600
  
  [realms]
  OURDOMAIN.LOCAL = {
  kdc = 10.0.0.1
  admin_server = adserver.ourdomain.local
  default_domain = OURDOMAIN.LOCAL
  }
  
  [domain_realm]
  .ourdomain.local = OURDOMAIN.LOCAL
  
  [appdefaults]
  autologin = true
  forward = true
  forwardable = true
  encrypt = true

  The test above is done with a keytab file generated on the WLS server according to the documents.
  I also tried using "ktpass' on the ad server to generate a keytab file there, and then placing a keytab on the WLS server file.
  It doesn't work with ' Exception: krb_error 0, no key found in keytab support. "
  
  I am able to run a ping between servers and have checked that there is no firewall running on one of the servers (they have virtual servers in a closed network). If the AD server should be able to receive TCP/UDP traffic on port 88 Kerberos.
  
  I'm kinda stuck here, and I can't see that we have different document Metalink support in our configuration.
  All good tips and advice on how to solve this problem would be appreciated.
  
  Kind regards
  -Haakon-

  Hello

  There is an error in the krb5.ini or krb5.conf:

  > kinit HTTP/ukpsrv016.bah.com
  Password HTTP / [email protected]:welcome1
  Exception: krb_error 0 cannot get kdc for Kingdom BAH.COM errors
  KrbException: Failed to get kdc for BAH.COM domain
  at sun.security.krb5.KrbKdcReq.send (unknown Source)
  at sun.security.krb5.KrbKdcReq.send (unknown Source)
  at sun.security.krb5.KrbAsReq.send (unknown Source)
  to sun.security.krb5.internal.tools.Kinit. (Unknown source)
  at sun.security.krb5.internal.tools.Kinit.main (unknown Source)

  -Check the krb5.ini (Windows) or krb5.conf (Linux, Unix) syntax errors.
  -L' example above was due to lack of space on each side of the '='.
  -Search for missing parameters, lack of spaces, uppercase or lowercase differences
  misspellings, missing or unbalanced parentheses.

  Refer to:
  http://docs.Oracle.com/javase/1.5.0/docs/Guide/Security/jgss/tutorials/KerberosReq.html#SetProps

  Also if this force solves the issue, could you let us know how you created the keytabs, and also orders setspn (with the user account as an administrator in AD WLS account). ?

  I hope this helps. Pls mark if he does.

  Thank you
  SVS

• When configing single sign - on for webenter, cannot open the homepage

  I use active directory as the directory server, use oam on config single sign - on for webcenter.
  the whole process seems ok, but when I open the webcenter home page, the error occurs. Here's the error page info:
  
  
  Operation Oracle Access Manager error
  Identification information (resource = / RequesterIP = 192.168.1.168 HostTarget = http://meware-station.meware.com:7777 operation = GET webcenter) used in the connection do not match a user profile in the identity system.
  
  Contact your Web site administrator to address this issue.
  
  
  
  need your help!
  
  Thank you!

  HV has not provided enough information to get any help. But generally, for these types of errors, check the credentials mapping plugin params. Given that your user store is AD, have you used samaccountname in terms of cred please?
  Let us know.

• How can I block my keyboard so when my cat button, the keys perform the functions? I have a lock on my computer so I need a password to sign, but I can't find any info on how to lock keyboard features in.

  How can I block my keyboard so when my cat button, the keys perform the functions? I have a lock on my computer so I need a password to sign, but I can't find any info on how to lock keyboard features in.

  A quick Google for "lock keyboard" raised a certain links that seem promising. Here's one of eHow that answers your questions to kitty:

  http://www.ehow.com/how_4925264_lock-keyboard.html MS - MVP - Elephant Boy computers - don't panic!

• Reset the password for the Single Sign-On

  I have forgiven vcenter Single Sign-On Administrator user account, the password. Now, I need to reset it without having to reinstall the Single Sign-On service for the installation of vSphere WebClient service.

  You can help... How can change it

  Run this script on DB RSA SSO to reset the password

  If the SSO (admini@system-domain) password must be reset, please run under the RSA database query:

  UPDATE

  [dbo]. [IMS_PRINCIPAL]

  SET

  [Password] = "{SSHA256} KGOnPYya2qwhF9w4xK157EZZ/RqIxParohltZWU7h2T/VGjNRA =='"

  WHERE

  LOGINUID = "admin".

  AND

  PRINCIPAL_IS_DESCRIPTION = 'Admin ';

  This resets the password 'VMware1234!', after which you open a session and the change of the password as needed.

  Note: Take backup of database RSA prior to execution of this

  
  

  As described in this thread vCenter Single Sign-On master password

• HP Compaq dc7700p: need driver for PC serial port

  "Hello, I have a desktop Tower" HP Compaq dc7700p Convertible Minitowers "running windows 7 Ultimate and need driver for PCI Serial port... here's hardware id:

  PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C & REV_02
  PCI\VEN_8086 & DEV_2997 & SUBSYS_2802103C
  PCI\VEN_8086 & DEV_2997 & CC_070002
  PCI\VEN_8086 & DEV_2997 & CC_0700

  Thank you

  Hello:

  You need this driver... You may need to install it manually.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3232104 & swItemId = ir_46768_1 & swEnvOid = 2103 #.