Why no sound with the mts files

Similar Questions

• First Elements 9: no sound with the .mts files

  I'm having a little problem getting my mts/avchd files to work with PE9. I imported the files using the Organizer, and they play very well (video AND audio) from the Organizer, but when I import clips into PE9, only the video is imported. There is no audio track and (logically?) no audio to be heard. How can I fix it?

  Mind, these .mts files play fine in both the Organizer AND windows 7. They are created on a Canon HF100 camcorder.

  The trial version of the PROGRAM itself is fully functional. However, some third-party components are not, unfortunately. It's some MPEG and AVCHD components.

• First time. Great, but other times without sounds of the MTS files?

  Hello, I bought first Pro CC and when I used the first time with. The MTS files, all were great, but after a few days, I made another video project and my files (.) MTS) have no sound? I was searching the Internet and many people say convert), but is it really only in this way? Plese help, thank you. Jan.

  Wild guess: you forgot to patch source audio track

  

• No noise imported with the mts file

  I have a paid subscription to CS6 version. I try to import a mts file but no audio only appears in the panel mounting. It worked perfectly yesterday. I can listen to excerpts in bridge without problem. I can read with vlc player without problem. What is going on

  No problem. I didn't get your suggestions as insults. It's just Murphy's law struck just when I needed to do something. I didn't know about the card. It's a PNY Pro 16 GB. I did download and reinstall and now everything works fine. I really do thank you for your time and your input.

• the MTS files do not work in CS6... Why not Adobe

  If I have a file in my camera sony in Prem Pro .mts, reports the video but no sound?  If I have him drop it into CS5.5 sound works.

  I downloaded an updated version of the Prem Pro from Adobe today June 2012. And still he will not address the mts files?

  I don't understand why it is so difficult to find a solution to this problem. two of the worlds biggest companies Sony and Adobe, and none of them covers the question on their site, and yet it is clearly a major problem?

  I've seen talk about on the site of renaming of files, which does not work and would be a pain in the rear.

  Does anyone have a solution that works?

  Please?

  FIXED Yipeeee!

  It is not all good news though, but I have a solution that will definitely work for you, all that it's a bit drastic

  This problem has been to kill me. I just want to be able to drag and drop the MCS file in first pro, as I always have with other video files and all the nonsense to shoot the whole folder structure just won't DO, we do not live in the 70s. And thank God, the file structure is just stuff and nonsense.

  What is happening is that... something on your PC does not work files (and Adobe do not have any idea what it is) and besides that I do, but until a person learns, I can tell you that a full blow and reload new windows will be 100% solve the problem.

  Now, I don't have one for years, so it was a complete pain and took more than a day to recover all the way I like it and to be honest, it will be a week before as I have all my favorite programs work properly.  BUT I can tell you that with Premiere Pro installed, I can now just PULL THE FILES FROM the CAMERA PHOTO HARD DRIVE and let FALL THE LIKE ANYWHERE and better yet, pull them in first ruined as I want and they play 'Sound and all' and that my friends is the way it should be

  I really hope this helps some of you, I'm glad it works now and I can get some work done, I began to hate my new camera, but now, I can tell you it's A1

  For Adobe, I can tell you that some parameters of another installed program system is clearly the culprit but I can't for the life of me tell you who.  I can say that it is not mine, or the programs fault but a lack of tests on from Adobe.  Because clearly, it is not, and a good number on your forum, and many others. Software should work under any scenario, I'm not running certainly all the strange programs that should cause this.

  Until Adobe can pin point a solution and patch their program, I can recommend my solution buy guys and girls make sure to save all your mail, Favorites, passwords, documents and any other valuable to you before doing a clean install and if you will reply in the Groove with our favorite editor PP CS6.

  TTFN

  I need to get some work done

• . No noise from the MTS files

  We use Premiere Pro to edit. MTS files.  We constantly had problems with Premiere Pro does not sound matter.  Normally, updated everything (not only Premiere Pro) will solve this.  We currently have a machine were nothing works, and from this second, we remove Premiere Pro to reinstall and try again.

  This nonsense of constantly fighting for the Premiere Pro to import sound lasts for months.  Why is it such a horrible struggle?  Is there something we can do?

  There are some good suggestions here, and I'll add a reminder for people to use the media browser to import media (as opposed to the import dialog box) with potentially dependent file like MTS formats.

  By 'folder-dependent', I mean the video may be in a directory and audio can be a file in a separate Directory. Then, if you import the video directly it can not see the audio. The media browser is smarter than the import dialog box, so he knows generally how access and import all of the media into a single import. The MTS files are not always dependent case (actually in most of my own media, they aren't) but they can be so it's good to use the media in doubt... browser and which would go to most of the other formats as well.

• Does anyone know how to open an old MS Word document file with the .ltr file extension?

  original title: file extension

  Does anyone know how to open an old MS Word document file with the .ltr file extension?  I would appreciate your help.  Thank you.

  If it's a Word document, why not just use Word to open it?

• Chronology of Lag with AVCHD (MTS) files

  We have been editing with AVCHD MTS files for years without any problems.  In the last week we have timeline lag when editing.  When the timeline scrub the video pauses for 30 seconds before starting again.  He's playing very well until you stop it.  Move to another part of the timeline and you sit and wait.

  We test and all passed: processor, hard drive, RAM, video card

  System:

  Windows 10

  OS & software on SSD, media on separate disk

  CPU Intel I7 4930K

  T.I. card video GeForce GTX 780

  32 GB OF RAM

  Hello

  Please go to Edit Menu of Premiere Pro > Preferences > Media and uncheck the option "Enable accelerated h.264 decoding Intel."

  Once done restart Premiere Pro and check the performance.

  Vinay

• NEED HELP as soon as possible update for Premiere Pro CC 2014 and now. The MTS files are not taken into charge/no recognized

  I have Windows 8

  3.4 Ghz 8 Intel Core i7

  32 GB of Ram

  PPCC2014

  I used first Pro CC for the last year or two and. The MTS files worked very well.  Since I've updated.  Can I use is no longer. MTS files.

  

  I sync all my images using plural eyes.  I've updated the plural eyes to make it work with the update new first Pro CC 2014.

  I tried to go back to first Pro CC; However, that has been updated as well.  It does not recognize the. The MTS files, but it does not matter the new .xml successfully created from the plural eyes 3.5

  If anyone knows help or workaround so I can complete my episode of TV.  It would be great.

  Also, I would prefer not to have to transcode anything.  Hours, hours and large files don't really work.

  I also looked in repacking.  I understand that clipwrap is perfect for that. However, I have Windows not Mac.  Other options look much too involved.  I would really just my Premiere Pro to work the way it's supposed to.

  Adobe Media Encoder is wrap?

  In any case, any ideas would be useful.

  Thank you

  Try to rename the parent folder containing the MTS clips.

• the most effective way to browse the MTS files

  I have been using mts for about 2 years now.

  When I get out of my car my camera sd I usually dump and go first.

  However, it becomes quite old and it takes a hell of a lot of time to go through 5-10 this way sd cards.

  Y at - it an application that I can use to view the mts files, as if it was a qt movie?

  with .mov can I just plug the card into my sd drive and browse in the finder. do not have to import or open a nle.

  I know that .mov is native in osx but y at - it a way to get a card that would allow my mac to treat the multilateral trading system the same?

  I think you need to CS6 for her to work.

• OSB file work twice with the same file

  I have a problem of execution of a proxy service that get the files from a file system. Everything in the flow works as expected, but at some point, I have to wait for an update on a database and the process awaits for this change. Everthing is normal if the update comes in the following minutes 1 - 7, but after that, if the process is always there in general (9-11 minutes), a second process is called and the processed file is the same. After the first process is called the folder is empty, so I don't understand why the proxy is called again with the same file, since there is nothing on the record. This can happen because I have make changes to the database.
  
  The process is called only twice with the same file, no process is still called (a third) If two processes still work, which is weird. given that nothing in my logical proxy back to the beginning.
  
  "Weblogic/OSB" tends to release resources on a specific time, such as 'Max Stuck Thread Time' but for files or other resources?
  
  No idea why this is happening
  
  Thanks in advance.

  I think it is due to the delay of transaction. The PolledMessageListenerMDBEJB under file carrier has a timeout of the transaction of 10 minutes. So if you encounter a very long-lived transactions that spans more than 10 minutes, you could see the price drop that passes due to the delay.

  To confirm, is this is the case, when this problem occurs, go to JMS Modules > jmsResources > wlsb.internal.transport.task.queue.file_auto_n > Monitoring. You should see messages in the messages waiting in the column.

  Click to view the Messages. Click on a message and check the number of delivery. This should have a value of 1 or more which should mean the message has been restored at least once before.

  If this is the case, you can try changing the value of timeout PolledMessageListenerMDBEJB transaction under file Transport provider in deployments and then update the deployment of file transport provider. Check in parallel with support on what is the official recommendation to increase the time-out period.

• playmemories ver3.0.2 House cannot see the mts files

  Playmemories home v 3.0.2 can not see the mts files. He can see all the jpg files. The MTS files can be seen in windows Explorer and also read via windows media player.

  Please check if the AVCHD format is listed as one of the supported formats of PMH. In your toolbar, go to [help] - [about PMH...] and select [Supported Formats] in the window that will appear.

  If the AVCHD format is not supported, please connect your Sony camera via USB and try to import AVCHD video. The software should recognize your camera and add support for the AVCHD format.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/LapMagWin

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Which programs are associated with the xcm files

  I found a folder in my folder system program (. 86) that I don't know or I don't know where it comes from. It has a bunch of XCM file in the known folder that cannot open my own computer, can not give me info on how to open and cannot tell me which of my programs, he joined. I want to delete it because it seems that a suspect case, but not because I can not check programs what or how much it may or may not be associated with.

  Sincerely yours, Aaron Baker.

  Take a look at this link:

  http://pcsupport.about.com/od/FileExtensions/f/xcmfile.htm

  Excerpts .....................................

  What is the .xcm file?

  Response: A file with the XCM file extension is a Concept exported CmapTools mapping file.

  How to open a XCM file:

  The easiest way to open a file XCM is double-click on it and let your PC decide which default application should open the file. If no program opens the XCM file then you have probably an installed application that can view and/or edit files XCM.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF