HP6600 squeaks when about to print

Similar Questions

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• The "fax" interface opens when I press print. Windows 7 Home premium - HP jet Office 6313,

  I had to install an update/fix for this printer (HP Office jet all-in-One 6313) my first installation of Windows 7 Home Premium on my computer (about 3 years ago). This does not all questions (I had a few problems scanning) but the solutions found to get. I recently downloaded the whole package from HP for Windows 7 again in the hope that all such issues would be resolved but havn't got round to install (mostly because I don't know if I should remove the previous first etc.?), but the presence of the new version stopped me to send the impression by opening the "fax" printer interface when I press 'print '. Any ideas - I see I'm not the only one. Thanks Charlie

  Hello Charlie, and welcome to the Forums of HP!

  I see that you are having problems printing.  I would like to help.

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• How to save a pdf file in the folder my documents when you are printing from Explorer?

  I often need to print Web pages to PDF and save them in the folder my documents.  Until a few weeks ago, it was no problem.  About three weeks ago I started getting the following error message every time I print a Web page in Internet Explorer when the selected printer is Adobe PDF and when I try to save to the folder my documents: when printing to PDF on a Web page in Internet Explorer, I can not save to my documents folder.  I have an error message "you don't have permission to save in this location. Contact the administrator for approval. "Now, I must save the new pdf to my desktop and then transfer it to the documents folder, which is a waste of time and that clutters my office.  How can I fix it?

  This problem does not occur when printing to pdf from other browsers, but I have to use some Web sites that work best with Explorer.  Even if in the Solution Explorer, I can print to the Microsoft XPS Document Writer, and save the document to the my documents folder without this error message.

  OS is Windows 7

  11 the Explorer

  Adobe Acrobat Pro X

  Try disabling Internet Explorer protected mode and let us know if that suits him.

  To disable the protected mode:

  1. open Internet Explorer

  2 - go to the top gear icon on the right

  3 - click on Internet Options

  4. under the security"" tab.

  5. uncheck the box that says "Enable Protected mode"

  6. click on apply and OK

  

  Thank you!

• and installed this (I think). Printer seemed to work. Now say "impossible filter. sometimes footprints of Safari, but no word. Sometimes, it prints a page when I turn printer on and outside. It's crazy to do. Thank you.

  I have a MacBook Air. I use OS x El Capitan V10.11.12. 3 days ago, I installed a printer Epson L355. Everything seemed fine, when I first printed a few pages. I installed the driver delivered with printer and followed the Mac set up. The process has not completely finished the whole upward. I then found a Mac driver Mac page and installed (I think - how will I know?) and it seemed ok. When I used it the next day I kept getting message "filter failed" when you try to print from wifi. There is a strong wifi signal and scanning is ok. I can sometimes print a page of safari, but not from Word. I tried to delete and add printer's done everything to nothing. get him looking for a printer then message "filter has failed", with the printer in the "inactive"

  Can someone help me please? I'm getting worried and frustrated in equal measure. I'm not a techie and really evil.

  The message failed filter keeps the driver having problems of compatibility with the operating system and not the network connection to the printer. You mentioned with the driver supplied with your printer. This is linked from a previous version of Mac OS X, because sellers do not tend to get the latest drivers on the CD supplied with the printer. And then you install another driver, you can have caused even more conflict. So I would recommend that you delete the printer Printers & Scanners and then using the Finder, select go > go to folder, and then type/Library/Printers/Epson and press the Go button. This will take you to the Epson folder that has all the files in the printer driver. Select all the files and then trash them. Then, restart your Mac and when you are logged in, go to the Epson website and find the L355 printer driver that supports OS X 10.11. Download and install this driver, and then add the printer via Printers & Scanners again. Then see if you can print.

• When I select print the printer responds but does not print on the first attempt.

  I have a printer HP psc 2170 and when I select print the printer responds but will print on the first attempt. It will start and then it is as if she is not detecting or responding and take up to 3 pages before it will print completely. I went back and set the parameters by default, unplugged the printer for a while and reconnected with no luck. Does anyone have ideas to help me solve it?

  Hello

  1. what version of Windows is installed on the computer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• I have an epson stylys photo printer - rx680 series. When I try printer I get err message, (open unit and removal to scan paper, I did but til do a printer)

  stylys photo printer - rx680 series.  When I try printer I get err message, (open unit and removal to scan paper, I did but til d)

  Hello

  Thanks for posting the request in the Microsoft community forum.
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2. What is the exact error message?

  You can try the steps in knowledge base article and check.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Try to update the latest driver on the manufacturer's Web site and check.
  http://www.Epson.com/cgi-bin/store/consumer/consDetail.jsp?OID=63069505

  
  Just reply with the results. I'd be happy to help you further.

• HP officejet 5610 all-in-one does not print one when it does print a map from 2 months ago.

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Who is this?  Do not print or print the old data?

  Under what circumstances does the former print job print (for example, after restarting)?

  Follow these steps:

  Open a command prompt window (start > run > cmd > OK)

  Type the following command and press ENTER after each line:

  net stop spooler

  del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]

  net start spooler

  output

• How to capture the pointer when you use print screen in Vista?

  I am writing instructions for three classes of Excel, and I want to capture the different sliders to include in the directions.  Of course, when I use print screen, they disappear, so nobody knows how to capture them?

  Hello

  I suggest you to try the cutting tool and check if it helps.

  Use the cutting tool for screenshots:

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  I hope that helps!

• my hp deskjet3050all-one j610 when asked to print a page as it is cancelled by the user

  my hp deskjet3050all-one j610 when asked to print a page as it is cancelled by the user

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• When it start printing; It intercepts the first part of the paper then stop

  Hello
  I have HP LaserJet 1100
  When it start printing; It intercepts the first part of the paper then stop; so it does not print and the part of the document come in but not out
  So what is the name of the part should be replaced?
  Let me know soon
  Concerning

  Hello

  Thanks for the post.  With it, we can have several questions the cause.  Type/paper weight, not enough paper in the tray, rollers which don't sting power or the remains of a previous paper jam.  I've included a pasted below document that can help with this and help refine the root cause.  Good luck!

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=25470&prodTypeId=18972&prodSeriesId=25470&ObjectID=bpl05811

• HP J4580 printer is "Send a Fax" when I hit print

  I am running Windows 7 and have an old HP J4580 that always work perfectly.  Now I can't print.  When I hit print it goes to the print page, then immediately changes to a page that says "Send a Fax" so I can't print.  I do not give up on this printer, but it is old enough that nobody wants to help me solve what is probably a simple problem.  Would be really grateful for the help!  Thank you.

  Hi Connie,

  This happens if the HP printer is trying to print using the fax driver.  Follow these steps and check if that helps.

  a. click the Start button, click Control Panel.

  b. click on devices and printers.

  c. right-click on the printer, and then select set as default printer.
  Note: Click on the printer listed that does not FAX in the name.

  To select a default printer

  http://Windows.Microsoft.com/en-CA/Windows/change-default-printer#1TC=Windows-7

  Let us know if it helps. If the problem persists, we would be happy to help you.

• When I'm printing to a file I can't find the file. How can I find?

  When I'm printing to a file I can't find the location of the file.  How can I find?

  It depends on the application, but it normally goes into the Documents folder.

  What you are trying to print to file?

• When I cancel printing, it does not cancel. Starts printing the same document.

  When I cancel printing, it does not cancel.  Starts printing the same document, what should I do?

  Original title: * E-mail address is removed from the privacy *

  From Internet Explorer

  Once the data was transferred to the printer, it can usually be stopped.  Some printers are different and allow you to cancel, even if she has already begun to put ink on paper.  Others only allow you to cancel during the data send always on the wire.

  So, it's normal.

• When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  When I send someone a document I changed if his crossing of the stuff or by adding arrows, when the customer print, it does not show my changes, I'm going through our prices so visitors cannot see and when the customer print them they can see prices?

  You probably use drawing markup tools. There are options to print with or without annotations. You can not change this.

  If you don't want them to see the prices, either remove the original document and recreate the pdf without them there or you can use the redaction tools in the full paid for version of Adobe Acrobat Pro.