Why outdoor lights not appear after upgrade to Muse?
After the upgrade of Muse I noticed that my sites show no outer glow when view in HTML. It is also not appearing in the PREVIEW mode.
Thank you for your personal response. After review of this matter, I reapplied the effect in the updated version of the muse, and it worked. I think that the problem resulted from the effect in the previous version of muse as well with the use of css in the new version, it took a re-application of the effect to appear. Travis
Tags: Adobe Muse
Similar Questions
-
Virtual Keyboard Pro Dell place 8 does not appear after upgrading Windows 8.1 for Windows 10
About my Dell coming 8 Pro, after having recently upgraded from Windows to Windows 10 8.1, now when I go to Firefox or other applications and click on in a region where the virtual keyboard automatically appears on the screen, it is no longer made. Y at - it a setting I'm not turn on or off in order to correct this problem? Thank you.
Excellent. Thank you so much MNP3.
-
TECHNICAL DATA:
Name of the operating system Microsoft Windows 10 home
Version 10.0.10240 Build 10240
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
System name SUZANNES-PC
System manufacturer Hewlett-Packard
System model HP Pavilion dv7 Notebook PC
System Type x 64-based PC
SKU LW473UA #ABA system
Processor AMD A4 - 3300M APU with 2 logical processors, 2 Lossnay, 1900 Mhz, graphics HD Radeon (TM)
Hewlett-Packard Version / Date BIOS F.21, 13/09/2011
SMBIOS Version 2.7
Embedded Controller Version 51,24 by action
BIOS Legacy Mode
Baseboard manufacturer Hewlett-Packard
Model baseboard is not available
Name of plinth base
Role Mobile platform
State of secure boot not supported
PCR7 Configuration binding is not Possible
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "10.0.10240.16392".
SUZANNES-PC\Suzanne username
Daylight saving time from the centre of zone
Physical memory (RAM) installed 4.00 GB
3.48 GB total physical memory
2.03 GB available physical memory
4.79 GB total virtual memory
3.26 GB available virtual memory
Page file space 1.31 GB
Paging file C:\pagefile.sys
Hyper-V - VM monitor Mode Extensions Yes
Hyper-V - second level address translation Extensions Yes
Hyper-V - virtualization enabled in Firmware No.
Hyper-V - data execution Protection YesNEWS OF SYNAPTICS:
Material Type Synaptics TouchPad SMBus
Number buttons 0
Status OK
ACPI\SYN1E46\4 PNP device ID & 71B2F2C & 0
Supported no power management
Double-click the threshold is not available
Handedness is not available
IRQ channel, IRQ 12
Driver c:\windows\system32\drivers\i8042prt.sys (10.0.10240.16384, 112.00 KB (114 688 bytes), 22:20 09/07/2015)PROBLEM:
The TouchPad works but the light that is usually lit when the touchpad is turned on/off (white/orange) does not work. I was wondering if there is a way to fix this, or there's someone else with this problem.
OK, this can be marked RESOLVED.
I searched and found an older post with the solution by holding down the FN key and pressing the space bar. The fire came as soon as I did it. Go figure!
-
Station homepage and menu bar do not appear after upgrade to Firefox 9.
Lion running on MPB. All other programs are beautiful and its only because I have improved. Its not in mode full-screen. Search on Google and search firefox did me not all tracks. Any help would be appreciated... Thank you!
Try to remove the plist of Firefox (org.mozilla.firefox.plist).
- http://www.MacFixIt.com/article.php?story=20060606082246983 how the .plist files become corrupted and results troubleshooting
Come on in "library > Preferences" and remove the plist for Firefox (org.mozilla.firefox.plist).
You can also try resetting launch services.
-
I downloaded creative cloud several times, why does the Bureau not appear after installation?
Sure Trudi.
The agent would be able to connect to your machine and solve the problem.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
-
Why the serial number does not appear after typing the code out of the card I bought?
Why the serial number does not appear after typing the code out of the card I bought?
See the following topics:
Using redemption code
--------------------
http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html
-
Second monitor is not detected after upgrade to Windows 10
After you have installed Windows 10 upgrade Windows 7, my second monitor is no longer functional. The computer is an HP Touch Smart 610-1065qd. I connect on the second monitor through a USB 2.0 Port Replicator 2005pr HP. The Replicator appears as a drive when you look at this PC and an arbitrator in him like HP USB DOCK, as it did in Windows 7. The Replicator seems to work, I can't access the SSD on the device and use a wireless mouse. The receiver is connected to the port replicator. The second monitor, also connected to the Replicator, as it was before the upgrade. Now the system is unable to detect this monitor. The MANAGER of peripheral DEVICES, MONITORS, indicates there is a monitor Active, listed as "PnP monitor" generic Device Manager displays a second monitor as a hidden device. Identified as a "generic PnP monitor' and the State of the device is"currently, this hardware device is not connected to the computer. (Code 45) ». In Windows 7, I don't remember the second monitor listing. USB and the DISPLAY NETWORK DEVICES, the entry is USB PORTS port REPLICATOR 2.0 HP 2005pr. Under GRAPHICS cards, there are two lists. The first is an adapter named "AMD Mobility Radeon HD 5570". This corresponds to my video card. The second adapter named "glance speed Boost. I believe that Ancestry.com can installed this. "This device is working properly" is the condition for both cards. I manually checked new drivers for all components. There is no effect. Then, I went to HP and downloaded the most recent Setup to monitor. I then tried to load the drivers and monitoring software. I also loaded the screen in compatibility mode, then in compatibility mode for Windows XP SP3, then compatibility for Windows 7 and finely mode as a regulator. As a result, I tried the same process with the original disc. After each test, I rebooted the system. Still unable to detect the second monitor, nothing in Device Manager and unable to detect a new monitor on screen. I attempt to change the Projection. He also, had no effect on the display. Then, I deleted graphics cards. First of all, the adapter "AMD Mobility Radeon HD 5570", which corresponds to my video card. Second, the "Speed Boost glance. This also, don't give not any what on second monitor display. Even if it is visible only when show it hidden devices is checked. Any suggestions will be appreciated.
I finely found a fix for the problem to my question; Second monitor, not detected after upgrade to Windows 10. Not the one I was hoping. It turns out that the fault was with the HP 2005pr USB 2.0 Port Replicator. It seems that the driver may be at fault. After more than a month of waiting, I decided to replace the duplicator. I decided to buy a Port adapter to replace the duplicator. What is much less expensive experiment and see if it was infecting the duplicator. It turned out that my second monitor is back and healthy. I decided to continue to use the port adapter and buy a USB Hub to replace this part of the duplicator. I no longer use the HD Audio output, after replacing the old speakers with Bose USB speakers some time ago. I thank everyone for help.
-
Projector does not work after upgrade from Sierra
My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.
Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index
-
Apple Software Update will NOT work after upgrading to Windows 7
Apple Software Update will NOT work after upgrading to Windows 7
flyboy340 wrote:
Apple Software Update will NOT work after upgrading to Windows 7
More information is needed.
Which machine you use, OS X are you running?
Windows 7 running in BootCamp?
The OS X app store is not present at all?
AppStore is present but the update tab does not?
-
FF does not start after upgrading to version 27.0.1
FF does not start after upgrading to version 27.0.1
Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214Firefox 27.0.1 is too recent for me to know what unique issues it may have. I will message you a link to download the installer for Firefox 27.0 to see that the inversion or not the problem.
-
Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate
My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.
Help please
Hi asalamk,
The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools
You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.
-
Satellite A300D-15B - Webcam does not work after upgrade to Windows 7
My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck
Hey Buddy,
What does it mean exactly when you say he won t work?
You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.
-
When I text on my Mac, why did he not appear on my iPhone?
When I text on my Mac, why did he not appear on my iPhone?
Have you followed these steps to implement continuity?
Set up SMS and MMS with continuity
- You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
- Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
- On your iPhone, go to settings > Messages > sending & reception. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and activate the device or devices that you want to transfer the messages.
- Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.
Make sure that your email address is checked everywhere.
-
HP Laserjet 2100 does not work after upgrade Windows 10
HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...
Thank you!
If the printer is connected using a parallel printer cable, please see the link below for the solution.
-
Windows Update service will not work after upgrading the hard drive
I'm running Windows Vista 64 bit, Home Premium SP2 with 8 GB of ram. I recently cloned my hard drive OEM of 500 GB, 5400 RPM Toshiba MK5055GSX via a standalone, dual drive bay dock for upgrade to a 750 GB, 7200 RPM, Western Digital WD7500BPKT. Since the clone/upgrade, Service Windows Update does not work and gives the message: ' Windows Update cannot currently check for updates, because the service is not running. " You may have to restart your computer. "And Yes, I checked and everything related to Windows Update seems to be 'turned on' or well defined, but the service will not work. Notes; Windows Update still works with the player "OEM", it is only the new WD drive that has the problem. Thanks in advance for any help or suggestion on getting this problem is resolved.
This fixes my laptop http://www.realworldrobotics.com/troubleshooting-help/windows-7-64bit/windows-update-service-not-running-after-upgrading-drive
Maybe you are looking for
-
erase the HD on my Macbook pro 2012
Hi all I erased my hd tonight and should not be my password, so I restarted it. Now when I restart it I get a flashing question mark flashing. How to make back to reinstall El Caption on my macbook pro
-
Satellite L30 does not start after the upgrade to 2 GB of memory
I bought 2 GB Crucial memory for my L30. After removing the 512 MB module and adding two modules of 1 GB the L30 wouldn't start. With only 1 GB start ok ok, with the other boot only 1 GB. Either 1 GB modules and module of 512 MB with start ok. The tw
-
Windows has encountered a problem with the DVD/CD on Qosmio G20
has obtained a g20, problems with the cd player. When I go to copy or move music or pictures on my cd/dvd, I get a pop up saying windows has encountered a problem with this drive...can someone tell me what is happening.Thank you
-
I just want to get different points of view on what company you think is the best between Verizon, Sprint, AT & T and TMobile
-
New hard drive LG Canada E300 Windows Vista Home Premium Laptop
I change my old HDD SSD hard drive. OEM is more portable computer sales and support for laptop. There is a recovery on the old HARD drive partition, but I don't know if I can use the recovery on the new SSD partition. How can I install Vista with ex