Why switching USB ports makes my iPhone that is recognizable as a camera in Windows XP?

Similar Questions

• Why my USB ports do not work?

  I put my pc in the shop to replace my windows, because the guy at the store said that windows was not loading because it has been corrupted... well windows works well now, but none of my USB ports work, I looked in my pc info but find nothing... my keyboard and mouse are usb, so I am on my husband's pc to now try to help... I don't know much about computers, but cannot afford to take it back to the shop... Help, please

  Hi Loretta, try this and see if it solves your problem.   http://www.howtogeek.com/HOWTO/Windows/find-your-missing-USB-drive-on-Windows-XP/    We know how it goes.

• Windows Vista - why my usb ports stopped working, and how do I fix them?

  My 3 usb ports worked very well, but a few days ago they just stop working.  I updated the drivers even though my drivers were already later.  I even tried to update the drivers.  Nothing seems to work.  Can you help me?

  Hi WillisPop,

  ·         Since when are you facing this problem?

  ·         You did it last changes before the show?

  Use Device Manager to disable and re-enable all the USB controllers

  This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  1. click on Start, type Device Manager in the start search box and press ENTER.

  2. expand Universal Serial Bus controllers.

  Note: you may scroll through the list to find this point.

  3. right click on the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  4. repeat the above steps for each controller USB is listed under Bus USB controllers.

  5 restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  6. check the USB device to see if it works.

  You can also check out the article below for more information:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices

• How to make the icon that indicates the caps caps disappear from windows 7?

  Hello world
  I am new to windows 7 but I am very happy with it, is great. However... There is something that I find very annoying and would like to settle as soon as possible a solution would be very welcome.
  I'm a trigger easy person when it comes to using earplugs I love and does not hesitate to she and I certainly don't want to turn them off, but I want really is to make the icon that pops up saying on the Caps hats disappear; It stops typing you for a second or two, but it is not that I don't want this crap appearing all the time, I find it very boring and does not prevent my goal when studying... HOW CAN I RESOLVE THIS ISSUE?

  HEY... Thank you.
  Someone told me Quickset but could not find it in my pc, guess there is a chance, I don't know where to look, but start certainly did not show it. or maybe it is not yet in the system.
  I contacted Samsung support by electronic mail and gave them as much detail of the pc as possible, except the number of pc, because I didn't have the box again but all similarly subsequently found in tiny and the same silver color on bottom of laptop PC. I was not thinking straight at the time to think and look at the bottom of the pc.
  What they did was to send me a link to a forum and say that it wasn't anything to do with them or others... not very helpful at all, but will contact them again with all the details.
  I'll deal with them and see if they like this for me.
  Thanks :)

• Why don't Adobe make it clear that the Dehaze tool does not work with stand alone Lightroom 6?

  I upgraded to LR 6 because of the Dehaze feature only to find out after that I bought that is not available without subscription of the CC. Very disappointed. Why isn't this clearly from the beginning. ???

  It was clarified at the beginning, to the official announcement of Lightroom 6.1/Lightroom CC 2015.1 https://blogs.adobe.com/lightroomjournal/2015/06/june-updates-to-cc-photography.html

  It lists the features currently available in Lightroom CC (which isn't Lightroom 6), and there is an asterisk next to Dehaze, the asterisk is said "Please note that these features are not available in the stand-alone version of Lightroom 6.1."

  Is that clear enough?

• Why Adobe continue to make crappy products that constantly crash and lost working hours when it is more embarrassing?

  Seriously!  If Apple had not done and stopped doing the CPF, I'd still like that my life.  Instead, I am stuck again using first.  Once again!  It is a piece of entry level of shit that they were NEVER able to make it stable.  She always does, and I'm sick of it!

  Always you rant.

  With first, breaks down and the corrupted project files are standard and since I used first the first (v5.1c).  I am disappointed and frustrated that Adobe seems unable or reluctant to engineer a product that constantly... does not crash.

  His bullet broof in my editing suites... so go figure.

  However... you actually fixed by simple adjustment of the system. Play well.

  And after disabling the sync and my firewall setting, set this last time, the problem seems to have resolved itself.

• Why we would have to pay all that money to get their hands on Windows 7

  I am currently using Windows XP SP3 and would like to know why we have to pay all that money to approach even Windows 7

  I have an old car, I would like to get a new one. Why should I pay for a new car?
  Think about it.

  In the meantime: http://www.microsoft.com/windows/buy/offers/upgrade-option.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Why can´t I make my scanner AGFA SNAPSCAN 1212U work properly, in my windows vista 32 bit

  original title: why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?

  Why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?

  Hi Søren benaceur

  
  You have compatible installed the drivers for the scanner working properly?

  There don't seem to be compatible drivers available for the scanner to work with windows vista. I suggest you try to install drivers available for windows XP in compatibility mode on Windows Vista and verification.

  http://static.Agfa.com/digicam_scanner_drivers/scanner/snapscan_1212u/index.html

   

  So to work around the problem, try to install the drivers for Windows XP in Windows Vista compatibility mode and check if you are able to solve the problem. Compatibility mode may or may not work depending on the specifications of the device.
  Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

  You can check the link for assistance on compatibility mode - mentioned below
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists while you can contact the manufacturer for assistance without a driver, the device may not work properly. Also, pilots can only be provided by the manufacturer of the device.

  I hope this helps.

• iTunes not identify iphone or usb port

  When you install Itunes on a new computer Windows 10, that's not identifies my iPhone.

  I tried the possible sollutions 'all' found on the web, but nothing makes any difference.

  When running the diagnostics on the computer it says that "Apple Mobile Device Driver is missing".

  When you run diagnose on any iPhone and iTunes, it is said that no USB ports has been detected.

  In the written report diagnosis (translated from Swedish):

  iPodService
  12.3.2.35 (x 64) is active.

  iTunesHelper
  12.3.2.35 is active.

  The Apple Mobile Device Service 3.3.0.0 service is active

  No USB chipset was found.
  No chipset FireWire (IEEE 1394) was found

  Found no iPod, iPhone or iPad

  The iPhone is connected by USB-cable and is dected by the computer and visible as a device in Solution Explorer, but not iTunes.

  I have reinstalled iTunes, tried all USB ports, restarted the iPhone, followed the relevant advice on the Apple support.

  I have no free support on me iPhone any longer.

  The thing is that everything is working well on my other computer (Windows 7) with exactly the same version of iTunes.

  Can someone help me why it does not work on my new computer?

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• Two of my USB ports stopped working (wired mouse and iPhone do not respond). What should I do?

  I have a laptop Toshiba Windows 7 which has two USB ports, which both have stopped work or respond. They were both working an hour ago and I made no changes to the computer. I have a wired mouse connected to one of the USB ports and my iPhone plugged in with a USB cable. The mouse is not responding and my iPhone is not being detected or charged. What should I do?

  Hello

  1. do you think that no matter what error code in Device Manager?

  2. you are trying to connect other USB devices to the USB port and check if it is detected?

  3. have you rebooted the system to see if they start working?

  Method 1:

  Follow the link below, run the fix it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  1. click on Start, type Device Manager in the start search box, and then press ENTER.

  2. in Device Manager, click the Hardware tab,

  3. expand Bus USB controllers.

  4 right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  5. restart the computer, and then reinstall the USB controllers.

  6. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Let us know if it helps.

• Computer laptop HP Envy 17 - USB Ports not working not

  Product: HP Envy 17 Notebook PC

  Operating system: Windows 8.1

  When I try and use the USB ports on my laptop, the system recognizes not the device is connected, or allows the unit to operate. There is no error message and device icon to remove safetly does not appear. This problem started after I ran a few Windows updates before turning off my computer for the night.

  The devices worked normally before but have stopped since then. Several devices have been tried, but to no avail.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you.

  Looks like that the USB Ports have stopped working on your laptop and your need help

  We will surely help you with this question at the earliest

  I'd like to request you to perform the REFRESH of your laptop back to a previous state

  When everything worked well and normal

  Step 01. Please go to settings on your laptop computer laptop

  Step 02. Select the general tab on the left side

  Step 03. Click on "refresh your PC without affecting your files.

  Step 04. Follow the prompts on the screen to complete the refresh/system restore

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• iPnone 4 s recognized do not want dv7 - 7333cl rnning Windows 8 when it is plugged into usb port

  Laptop does not recognize the iPhone 4S when plugged into one of the 4 usb ports. All the usb drivers are up-to-date. All the udates win 8 and HP have been installed and are ongoing. Ports recognized so sticks of memory seem to work. Is there a special driver needed for iPhone?

  Hey texasbootz,

  I'll have you to answer a few questions to understand exactly what is happening:

  1. When the iPhone is connected to the laptop, there is no pay?
  2. When the iPhone is connected to the laptop, it appears in Device Manager?
  3. ITunes is installed?

  If she is not charged when it is connected, it is possible that the cable you are using is not working properly, and you may need a replacement. Alternatively, the iPhone itself is having a few problems.

  In any case, given that the other devices work in all of your USB ports, it is possible that its a software issue (with pilots from the iPhone) or a problem with the case of the iPhone. You will need to contact Apple for support on any of these questions. I suggest try to re-install / install iTunes, see if that fixes it, then contact Apple.

  I hope this helps!

• How to solve usb port? has not detected printer or other devices.

  the two ports usb on the right side of the pc does not detect devices that are plugged in. Only 1 port (usb) to work. have updated, reinstalled (after deleting)... you name it, I did it. Help, please!

  Click RUN - SERVICES. MSC - OK - find PLUG AND option, make IT AUTOMATIC STARTUP TYPE-. FINISHING.

  RESTART YOUR COMPUTER, GO TO THE BIOS SETUP, FIND 'USB PORTS' MAKE IT ENABLE.

  TURN IT BACK ON. Good luck

• RV320 where is finding a NSD pass for USB Ports

  Hello

  I have a RV 320 FW: 1.1.1.1.19 I try to bring a USB Dongle to work on USB1.

  In failover USB settings I can change the settings for 3g / 4g primary Mode off and save it.

  But now when I want to change to another mode like failover/hot or cold / failover or primary router reports an error

  what it says: Please enable NSD to USB Port... but I can't find a switch for the NSD on USB in the Menu of the router.

  Anyone know where to find?

  Thank you

  Hello

  I see that you have opened a ticket with support of this, so I'll give you the answer to the public.

  To avoid seeing this message, WAN1 network service detection both WAN2 must be verified. There is no NSD for the USB port. I see that the message is misleading, pointing to the USB interface. It is intended to be fixed in the future.

  Thank you

  Bismuth

• Satellite M300 - left USB port does not work

  Hey,.

  I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

  Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

  Any advice? Thank you very much!
  Dan

  Jin

  I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.

  Greers