Why the blue wires turn orange when changing to subtract to divide the operation?
Hi all
I wonder what happened in my block diagram.
I had an article that has had an operation of subtraction with numbers... I realized that I needed to divide by 2 rather than subtract long days here by two (summer)... and when I did, all turned orange wires before blue...
I have a compound arithmetic by adding 3 numeric values to come... through a case statement... case 0 default transmits values through, case 1 divided by two...
Is there a change of type of data here, I do not understand?
Thank you in advance,
Cayenne
Divide an odd integer value leaves you with a decimal number. LabVIEW decides so it is best to use a floating point representation (double in this case) If no data is lost.
There are several alternatives if you do not want to change your data type: function quotient & rest, scale of power of 2 function (in this one you will have to imagine a way to distinguish odd numbers if you need to)
You can, of course, also to change the type of data in full after the division.
Tags: NI Software
Similar Questions
-
Why my video boxes turns off when I run my cursor over them
Why my video boxes go in when I ordered my cursor over them
Hello
- What exactly do you mean by video boxes go out when I ordered my cursor?
- What happened to all the videos?
- Are you referring to the videos online?
I suggest you to give us more information about the issue so that we can help you better.
-
I met with an error ORA-00904: "V_DEPTNO": online: 14 (My PL/SQL code is below), while playing with the cursor of reference (for the end of the apprenticeship).
I debugged it and the problem was solved and it returns the desired output. However, the solution of it is not sensible for me even if the output
has been posted/successfully recovered. Here's a clearer description of the code:
On line 14, I have a variable called stmt and stmt value concatenated with the string "where deptno =: v_deptno' and then finally assigned to this stmt variable."In this line, he returned ORA-00904 but it was fixed by using =: operator instead of the = operator.
stmt:=stmt || 'where deptno=:v_deptno';
In sql pure when it is intended to add where clause for such purpose, the = comparison operator is used.
Example:Select empno,ename,sal from emp where deptno=10;
But in my pl/sql code, =: operator was used.
Why is this? Can someone explain what it is? Even if I did my research, but I couldn't find the explanation yet.
All what I've understood so far, is that this may mean the following (I may be wrong):
1 - everything first, assign the value 10, of v_deptno, who was declared, to easily compare.
2. compare the value assigned with deptno.
On this basis, recover data.
Thus, he worked as a = + tour operator defined in another high programming language such as c#... etc.
Example:int a = 0; a =+ 1; // a was declared as an integer that has value 0 // then we tried to increment by 1 or add by one // so it would be a=a+1; //which is a=0+1;
It works the same?
Here's my complete code pl/sql, just in case...
--ref cursor declare type emp_refcur is ref cursor; emp_cv emp_refcur; emprec emp%rowtype; stmt varchar2(299):= 'select * from emp'; v_deptno number:=10; begin if v_deptno is null then open emp_cv for stmt; else stmt:= stmt || ' where deptno=:v_deptno'; open emp_cv for stmt using v_deptno; end if; loop fetch emp_cv into emprec; exit when emp_cv%notfound; dbms_output.put_line(emprec.empno||chr(9)||emprec.ename||chr(9)||emprec.deptno); end loop; close emp_cv; end; /
I would you to explain and share with me something to read or give me some clues.
Thanks in advance!
In this line, he returned ORA-00904 but it was fixed by using =: operator instead of the = operator.
There is no "=:" operator.
The colon character ': ' is used to define a binding (placeholder) variable in the query string.
The value of this variable must be passed ("linked") after analysis and run step so that the query is executed correctly. That's what the USING clause in your code.
Thus, he worked as a = + tour operator defined in another high programming language such as c#... etc.
Example:
- int a = 0;
- a = + 1; one has been declared as an integer that is set to 0
- then we tried to increment by 1 or add one
- so it would be a = a + 1;
- which is a = 0 + 1;
It works the same?
No, nothing to do with it.
-
Why my line does not move when changes to the attack?
I hope I can explain it properly. I have a text box that contains several paragraphs. I want different for some of the paragraphs. When I select the paragraph I want to change and reduce the attack compared to the "auto" setting, paragraph lines clogged, but the whole paragraph moves upward. I have tried everything I can think and it just doesn't work. I can increase the attack and that works, but I can't decrease.
I use InDesign on Mac OS 10.6.8 7.0.4
Thanks in advance!
I found your question because I had the same problem. I fixed it by four times by clicking on the text to ensure that it has been selected. A good explanation of why this works is here: http://indesignsecrets.com/reigning-in-rogue-leading.php.
-
BlackBerry Smartphones why my blue LED lamp flashes when there is no messages?
I have a similar blue light to alert me when a family calls from family member. However, my lights to alert messeging aren't blue! Light blue guard alert me, why? Thanks in advance for answer!
I would be checking that app third party, Mega Knight or something. He is the culprit.
-
Why program taskbar button turn orange and blinks?
What are the causes a button Taskbar program of change to an orange color and sometimes blinking?
Hello
This feature is by design.
The programs in the taskbar sometimes orange glow and flash because they are active or if they have a notification.
For example:
If you insert a flash drive and AutoPlay works, but you do ot whole auto play program flashes orange and also flash just to see that USB has been detected and there several fot options allows you to select the auto play menu.
Even in the case where an event occurs on a program that has been reduced to a minimum, then this program will Flash orange spots in the bar.
-
Why the operation is aborted window began to appear for the site I've been using regularly?
Hello
After going to the cheezburger.com homepage, when I hit one of the options page (for example the failblog) - a window of internet explore said operation - no access www.cheezburger.com - abandoned IE. I use this site previously without this problem.
Hi frankiest,
Have you tried resetting IE? Internet Options > advanced settings > reset.
It could be that easy to fix this problem, please come back and I hope this helps!
-
Red in my pictures turn orange in PS CS3, Lightroom, and Bridge
Hello everyone, I have an another question that has to with my previous post 2 days ago...
For some reason, all my images that contain the color red turn orange when they are opened in Lightroom 1.4, Photoshop CS3 10.1 or bridge 2xxx.
But my images with red look red on my desktop, it's just when I open them in the three products listed above - they turn orange.
Any image that I shot also loses its red color in the view Finder on my MacPro OSX 10.5.8.
The images are red on the screen of the camera after I shoot them, but when they arrive in my Adobe products or view Finder on my MacPro, the reds turn to orange.
I shoot with the Digital Canon DSLR and I am a professional photographer.
I don't know what to do, I have work that needs to go to the customers, but I don't think that these orange reds will go well.
Anyone has any ideas on what's going on?
Any help or ideas would be greatly appreciated.
Thank you all
If your colors are going to be that bad, the color produced by the calibration profile is bad.
Check with GretagMacBeth - they may have updated software, or may need to fix a bug in the calibrator.
In addition, bad hardware calibration is not unknown.
Yet once, it is bad in Photoshop, LR, etc., because these are the only programs USING the display profile.
-
The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?
Original title: clear the display
Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.
Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.
You can now close the Power Options pane when you return.
-
Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?
Simply indicates that the devices are on.
Barry
-
Get annoying action ads at the top of the Yahoo home page. I always use Firefox and haven't changed the settings, then why the big announcements? I know that they are put there by Yahoo, but they were not there before and they aren't there when I open Yahoo with Explorer.
Install adblock more with subscription easylist and check
-
Why the rejection of multiple photos doesn't work anymore when you change pictures?
Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!
Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.
Have you tested, if the problem occurs only in an Aperture library or libraries opening?
Create a new Aperture library to test and see rejection, so it works.
If it does not work in a new library either, I got trash Aperture preferences.
In preferences file is now in the container folder in the user's library.
Try this:
- Leave the opening runs.
- Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
- and the ~/Library/Preferences/com.apple.Aperture.plist file
Your user library can still be hidden. To reveal the hidden user library:
- Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
- Select your folder user/home (with the House icon in the side bar of the Finder)
- With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
- In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
- Open your folder, then the library folder, then the containers.
- Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
- Delete ~/Library/Preferences/com.apple.Aperture.plist as well.
Now, restart the Mac, start Aperture and try see your book. If all goes well, delete the folder on the desktop.
-
On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside. When on this subject that is supposed to be a white light showing that it is on. How can I fix it? It happened when I upgraded to Windows 7 from Vista. Help, please?
Windows Update has nothing to do with the upgrade of Windows. Try posting in one of these specific forums Win7:
http://social.answers.Microsoft.com/forums/en-us/w7install/threads
http://social.answers.Microsoft.com/forums/en-us/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Why the computer turns off when it should ' t
I have the computer and look at things and then all of a sudden he stops he can resume, but then he comes only to request password and stops I have to wait a few minutes and restart it, it works for a while and then starts all over again did a number of things to clean the disk and defrag and norton viruselp but still have some prob please h
Hello
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
It is just like it loses power or stop it in the normal way?Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
air vents. Check that fans are working (before and after opening the case). When your laptop on all the
You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
test).This sounds like material so if the above does not help you then probably need help
a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
Support of system Maker.===========================================================
Check with these utilities to see if information may be collected: run BlueScreenView
to see if there were any BlueScreens and verify in MyEventViewer at shutdown
(or a few seconds before) See the event log contains useful information.It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
or time of the BSOD or event to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it a bit before and after the time of the event or BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
application of all accidents occurred in your system. The information breaks down is extracted from the
.WER files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Troubleshooting methods:
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
When I turn on my windows vista computer, all right. Then after 5 minutes the 'blue screen of death"is displayed, when the computer restarts, logo startup screen goes fuzzy and it remains on this page (the logo screen) blurred for hours. After a day or 2 when I try to turn on the computer, on the entire process starts again (fine for 5 minutes, then it goes weird) what's the matter with him?
Hello
Use Safe Mode to try to troubleshoot - repeatedly press F8 when you start.
-----------------------------------------------------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Maybe you are looking for
-
Control center of iOS 10's video Panel, no music
According to the User Guide and all reports online that I can find it, the iOS and 10 control center has a panel for reading. But the control center of my iPad is not a music group. Instead, it has a video Panel that is not actually play all the vid
-
Scan on Macbook Pro does not.
Hi, my MacBook Pro (OSX El Capitan) is no longer will allow me to scan documents. It connects to printers and prints still, but the scanning program that used to come to the top when I'm connected to a scanner appears more. I tried to reset the print
-
Is a way to talk to the man to fix my account blocked?
Is a way to talk to the man to fix my account blocked?
-
error code 800106BA unknown error
What is the problem of Microsoft? You're Idiots kno. You know what the problem is. Allows to repair
-
Development of Windows application
I have photo download issue in this app development platform can someone help me http://appStudio.Windows.com/projects/846c5ec3-d7da-4b51-b3f9-3b5dafab3a4e/content/815c5dc6-8305-4040-83bf-a961107e136e