Why the calendar not storage my dates?

Similar Questions

• Can see LUN but not storage of data on one of the 3 armies ESXi 5.1

  We are currently setting up a new iSCSI SAN in our datacenter, but I'm running into a bit of a problem.

  Everything works beautifully on 2 of our 3 ESXi hosts, but the third host cannot see the warehouses of data to the new San. However, it can see all LUNS. LUNS are presented regularly in the cluster (checked by running the list of esxcli storage base path as in KB VMware: identify the disks when working with VMware ESX/ESXi ) and list of device of esxcli store don't watch not all filters attached on the host of the third. I tried following VMware KB: can not see some or all devices of storage of VMware vCenter Server or VirtualCenter to troubleshoot, but it doesn't seem to be a recommended action if LUNS are consistent. Does anyone know where I could look to solve this?

  Thank you!

  Thanks john23.

  That got me on the right track, I saw in the newspaper that connect to the initiator not was not so I went back to basics and tried a vmkping who has worked and then tried a vmkping the use of frames that failed! It turns out that the MTU for the vSwitch itself has not been configured correctly on the host of the third if the VMkernel ports were.

  Thank you!

• Had to reload the operating system, the loss of the calendar entries, have old data, how do I recharge the old entires caledar?

  I have all the old Thunderbird and Lightning data in the profiles folder. I don't remember the name I had given to the calendar

  Create a new profile and copy the one above him.
  http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird#Create_a_new_profile_and_copy_the_old_one_over_it

• Why can I not move file .dat to the recycling bin?

  When I try to delete a .dat file that he asks to delete permanently, however I don't want to do this. I want to just move it to the recycling bin in case I need it, I can restore from there. However whenever I delete the .dat (from Desktop on my C:\ folder) it not move not the .dat file instead he said: he can't move it and it can delete it only permanently. I have a SSD hard drive in a laptop.

  I already checked Recycle Bin properties (those configured correctly) and it is not on a flash drive, this drive has a recycling bin.

  I wonder what it could be?

  What is so special about a .dat file?

  Wrong question: nothing special about of a .dat file.

  Good question: what is so special about your Windows installation?

  I suspect malware, a virus, or a third-party application that has its own ideas on the .dat files. It certainly isn't a property of Windows. You can easily check this by running a test on any Windows 7 computer.

• Why have I not storage after deleting everything on my iPad Air?

  Help, please! My iPad Air said have no storage. I tried to delete all my games even photos and videos, and it is still saying that I have no storage. There he gives me storage after deleting all my photos and my videos. Also where to find the recently deleted? Thanks in advance.

  The message refers to no space on your iPad or in the cloud for your backups?

  In the Photos app recently deleted album is in the Albums tab in the app - if you view the Photos tab (Moments / Collections) and then press Middle Albums at the bottom of the application.

  After draining and so settings > general > topic > available does not increase, you can try a soft-reset/reboot to see if it's update: press and hold buttons sleep and home for 10-15 seconds (ignore the "slide to turn off"), then the Apple logo should appear and the iPad should restart.

• Why the swf not working

  I use after effects cs4, first of all, I use Composition-> new Composition and import files back.psd and rabbit.tga. Can I use the tool corner on rabbit.tga, and get moving. I use Composition-> Preview-> preview RAM, I really see the rabbit.tga move. This is the effect I want. Finally, I use the file-> export-> Adobe Flash Player (SWF) to create a swf file, but when I run the SWF, I find the rabbit.tga do not move! Why? Where's the harm?

  Any ideas will be appreciated!

  Thank you

  Make sure you rasterize features unsupported in your SWF file export settings.

• Why the Photo not to send my picture to iCloud

  Hi, I have a problem with Photo and iCloud. Do not send photo app to iCloud. Download collapsed for sending... I can make it work?

  

  How long it stopped, the first download can take days and seems to stop to process videos.

• Why the prevention of execution of data is closed itunes?

  I try to connect to itunes. I get itues has stopped working properly. What is a custom of preventation of executing data allows me to go on itunes. never had this problem before. So it has been for a week. you will need to get pieces of itues for my work.

  Try to update to iTune or install the latest version. Try to uninstall and install the most recent. Also run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• BlackBerry smartphones can not sync the calendar ("not installed")

  I was sync my blackberry with my Outlook 2010 calendar for some time.

  Suddenly, it syncs.   When I try to configure in the Desktop Manager, "(non installé) ' appears next to the option calendar."  It will allow me to synchronize with the Outlook address book.   The only thing that has changed on my computer was installing Microsoft updates.

  Hey jr21brook,

  Follow the steps in this article to get operational synchronization:

  www.blackberry.com/btsc/KB23978

• Why RMAN is not storage of backups in "db_recovery_file_dest?

  Hello

  Select the name, the value of the parameter $ v

  WHERE name = 'db_recovery_file_dest.

  NAME	VALUE
  db_recovery_file_dest	/ora_backup

  When I run the following commands, RMAN lance store backups in "$ORACLE_HOME/dbs':

  RMAN > check effective additional 0 logical backup

  format "% d_ %%U t_ level0_.

  as a database of compressed backupset;

  My understanding is that RMAN should save the backups under '/ora_backup'.

  And when I run the following command, RMAN stores save under ' / ora_backup ':

  RMAN > backup database;

  Could you get it someone please let me know what I'm missing here?

  Here is the config RMAN:

  RMAN > show all.

  RMAN configuration parameters are:

  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  CONFIGURE BACKUP OPTIMIZATION # by default

  SET UP DEFAULT DISK DEVICE TYPE; # by default

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default

  SET UP THE DEVICE TYPE DISK PARALLELISM 10 TYPE OF BACKUP BACKUPSET.

  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default

  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default

  CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 5 G;

  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default

  CONFIGURE ENCRYPTION OF DATABASE # by default

  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default

  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default

  CONFIGURE the SNAPSHOT CONTROLFILE NAME to "/app/oracle/product/10.2.0/dbee/dbs/snapcf_< SID >.f '; # by default

  RMAN >

  Best regards

  If you specify a FORMAT, it substitutes for the use of the FRA.

  Run a

  INCREMENTAL LEVEL 0 AS COMPRESSED BACKUPSET DATABASE BACKUP

  Hemant K Collette

• Why the calendar discovers trigger

  Hello
  
  I have crossed on trigger on the view we have time before or after why that please someone tell me.

  What is a rather relaxing? In this case it won't just before or after.
  If it is instead of insert, then the trigger occurs when code is an insert in the view.
  What is your case? Cause I can't understand what you mean, unless you describe more in detail your problem.

  When views are produced by joining several tables, then, how an insert/update / delete this view? Which of the tables involved in the selection that produces the view must be the DML target? To resolve this problem, on the contrary - triggers are used. And they perform DML instructions on one of the tables that are used to produce the view (and may do other things). This is why there is no before or after paragraph to these triggers.

• Why the MouseEvent not a compilation is constant?

  Hi - I'm trying to understand AS3 having never really understood AS2.

  In a class file, I have a button (GameButton) I want to all proceedings there are exactly the same. I found this code in a tutorial, but when I run it I get the error: "Type was not found or was not a compilation constant: MouseEvent.»  And then he appoints 2 of my public duties. I don't see what is wrong, so I hope someone can tell me what is the problem here.  Here's all the code in my class file:

  package {}
  
  import flash.display.MovieClip;
  
  SerializableAttribute public class GameButton extends MovieClip {}
  
  public void GameButton() {}
  
  trace ("GameButton has been created");
  Stop();

  
  addEventListener (MouseEvent.MOUSE_OVER, hoverOver);
  addEventListener (MouseEvent.MOUSE_OUT, hoverOff);
  }
  
  public void hoverOver(event:MouseEvent):void
  {
  this.gotoAndStop (2);
  }
  public void hoverOff(event:MouseEvent):void
  {
  this.gotoAndStop (1);
  }
  
  public void setLabel(newLabel:String):void
  {
  this.buttonLabel.text = newLabel;
  }
  }
  }

  TIA your expertise.

  JL

  When you see a message like that it means that you need to import that class (just as you have imported the movieclip class).  (or, you have made a typo, and there is no such class.)

  If you don't know how to import this class, see this category in the help files, and at the top, it will show how it should be imported:

  import flash.events.MouseEvent

• Why is deck not up-to-date thumbnails

  I even tried to reinstall Adobe, but it did not help

  Good, glad that fixed the problem.

• Why the calendar shows only 30 seconds of my audio clip of 2 min?

  Need help for this.

  Composition--> Composition settings. Seriously, read the help. It's basic stuff.

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

  Mylenium

• Google calendar can not connect to the calendar app

  On a new computer (Surface Pro :) I have connected my Gmail account to my Mail app and it worked as it did on my old computer. When I closed my Mail app I was expecting to see my Google calendar event appear, but nothing was there. I open the calendar application and went settings, and then click accounts. For some reason it was not connected to my Google account for this application. I tried to connect the account, but it showed whenever (my e-mail and password were correct):

  "Unable to connect. Make sure that the information you entered is correct. »

  I tried to uninstall and reinstall the Mail-calendar group, but he did not do anything.

  On a note related, when I first tried to sync my Gmail account, it did not work and the app has said something like "unable to connect to this account", but later it was working fine except the account who worked was a duplicate of one that didn't work. I deleted the duplicate which was not working and everything works as normal in the Mail app could be the reason why the calendar app did not work?

  Google stopped their sync Exchange system, which is the synchronization system used for completely almost all smart phones and PC on the planet.  Rather than implement the CalDAV standard as widespread, Google has just announced that they will use a synchronization exclusive customized service to advance calendar.  They published API that allow for that integrate other software with this service publishers, is not impossible to think that it can be integrated in the calendar app in the future.

  I know it's incredibly ironic for Microsoft to be on the receiving end of the present, but with anti-competitive measures Google takes, you're probably only going to get the best experience of using the Microsoft calendar service, Outlook.com (formerly Windows Live Calendar).

  There are ways to get Google Calendar to show up in the Windows Calendar by adding the iCal feed to your Outlook.com calendar, but as far as I know is the only option right now and is read-only.