Why the subform presence event isn't going to invisible or hidden?

Similar Questions

• Why the choice of 'Rolling' isn't grey in the OBJECTS tab?

  I guess I'm just missing just plain obvious, as I just installed Captivate.

  But I for the life of me do not understand why the above is gray.

  Any guidance would be appreciated.

  I think I can answer my own question: namely, it seems, rolling options are not available for reactive projects

• Why the bottons keep event pressed, although the structure of the event has already executed the event

  I have a problem with this VI, the structure of the event running the event when you press the botton but the botton maintains, even if the event has already run, just the stop button works as it should.

  Everyone thinks that I have to use an architecture or it's ok just use the structure of the event?

  This happens because you have control over cluster in one case and manage events of changing values in other cases; the cluster can be read in one case.  Move the control of cluster outside the structure of the event and delete the register shift.

  

• Why the image size is smaller when going from RAW to Photoshop

  My computer has dropped recently and I had to reboot Photoshop CS2 worm 9 and I had to download Camera Raw plugin version 3.7. Now when I

  process a Raw file, which is normally an image of 54 x 36 inches, now, I'm getting a picture of 16.2x10.8. I can't find why it is to reduce the size of the file. Any ideas?   Help

  Thank you

  Don Spears

  The 'size' of an image is a combination of its dimensions and its resolution. While the dimensions may change, the chances are that your resolution was changed as well. The largest dimension is prolly at 72 DPI (pixel pre inch), and the smallest dimension is prolly more at 300 PPI. Camera Raw has the ability to change that, but also to change the pixel dimensions, check what is the PPI to your second image. If it's more like 300PPI so you just a different ratio. If it is 72 DPI then you did something to downsample the image.

• Why the plane suddenly and without warning goes on full throttle about 500 feet from the runway, on some missions, FSX deluxe?

  It's when you're on final approach to the runway that it does. Help would be appreciated
  This is a command that I can change, or is it a setting I stuffed up in installing and customizing my controls?
  I don't have a joystick, only keyboard control to present, but seeks to improve

  Hello

  Please post your request in the Microsoft Flight Simulator forums and it would be better suited to the community of players for Windows. Please visit the link below to find a community that will provide the support you want for better assistance.

  http://support.Microsoft.com/GP/games-for-Windows

• Check box to hide the subform does not

  I have what I think it's a pretty simple dilemma. I have a check box that will be used to show/hide a subform when checked/unchecked.

  However, any code that I have written seems to work. The box is an object in page1 and not wrapped in subforms. The subform has simply two inside text fields. the properties of the box have been defined for bind values are 1 for archiving, 0 for uncontrolled. The fields in the subform exploit the value "invisible" because I don't want to see these fields in the form (unless the box is checked).

  My code is:

  Form1. Page1.newspaper::click - (JavaScript, client)

  If (this.rawValue == 0) {}

  xfa.resolveNode ("form1..") Presence Page1.Newspaper_Subform") ="hidden ";

  }

  else {}

  xfa.resolveNode ("form1..") Presence Page1.Newspaper_Subform") ="visible ";

  }

  This code is located in the under JavaScript click event. The form is saved in a dynamic XML form to Adobe. I use Adobe Pro XI and LC ss4

  I can do this work in the generator of the action, but I want the subform back to hidden when unchecked.

  Obviously, a beginner in Java script, ideas/help you might have would be appreciated.

  What exactly is the problem?  Is this not not showing or hiding not when you change the box?  According to your description, you have two text boxes the invisible value but your script changes only the presence of the subform.  If you show the subform without changing the presence of text boxes, they will remain invisible.  If you want all show/hide together, set the presence visible text boxes and simply change the subform presence as you are now.

• JavaScript to remove the subform

  Hello!

  Can someone please tell me what am I doing wrong and why the subform is not removed when I push the button 'Remove the position' ?

  I use the command _Subformname.removeInstance (1);

  Is that correct. Help, please!

  Set the property to "min" on each form as '0' (zero) before making a removeInstance and set the argument removeInstance on '0' (zero). The seal contains the update ' click on ' event as for Subform1 scripts, below.

  Form1. Subform1.Subform1.Button1::click - (JavaScript, client)

  Form1. Subform1._Subform1.occur.min = '0 '.

  Form1. Subform1._Subform1.removeInstance (0);

  Steve

• Why the application manager said that muse is updated, when it isn't? And will not let me update?

  Why the application manager said that muse is updated, when it isn't? And will not let me update?

  I have the latest version of OS X I opened Muse and he tells me that I have to update. I have check and that's only still v1.1, 960 to build.

  There is a promblem I don't know?

  Hello

  Sorry for the confusion and frustration.

  Because the Muse is an Air application, there are some limitations in the way that we interact with the Application Manager that can cause these types of States in conflict. We have plans that will address this, but unfortunately, it of a complicated situation and will take time.

  I'm working on a document that will address all the various installation questions such as this one and post it on the forum and elsewhere when its done. I apologize that this has not happened before and several people were affected than expected.

  See you soon,.

  Justin price

• Script to detect the subform dynamically the value of presence

  I have a subform named "Q", what is hidden until the user clicks on a radio button. If the subform is visible when the user clicks a custom e-mail button, I want to write a script that checks to see if the subform IS visible. I used the following without success:

  If (this.resolveNode("QAN").presence = 'visible') {}

  follow these steps...

  This script detects the presence of a subform that is changed dynamically from hidden to visible?

  If you want to check something you use == instead of =

  If(QAN.presence == "visible")
  {
       do the follwing..
  }else{}
  

  == is a relational operator

  = is an assignment of value (this.rawVaue = 3; average, the current object to get the 3 value)

  Useful?

  Kind regards Mandy

• Why the hell I see adds anywhere in the browser, even if I have my ad running block? and why the hell every time I put the default home page, this isn't?

  Hello

  Why the hell it adds every where now? It was not the case before? and why the hell every time I change the home page to be the default, the min that I restart Firefox, it came again on the same silly page I don't know where the hell it came from?

  It was a very pleasant experience to use Firefox, but no more, I still love him his heavy on the machine and stuck a lot lately!

  incident reports NEVER managed to send that I don't know why!

  Come on guys, you can do better than that!

  Hi ajag,.
  Sorry, you have problems, but probably some adware or malware.

  Thank you for including the information system. I'm not familiar with "Vonteera free ads" However, he is apparently adware. Pay attention to the advice, followed by research on the internet I would be, for example, do NOT try the YAC website or tool.

  Using the Firefox addons Manager and Panel configuration remove toolbars unwanted obvious or programs. Then fully analyze up to tools date and multiple.

  • General method: remove a toolbar which took in charge your Firefox or the homepage Search

  Please follow the tips in the link above immediately and then do full scans as shown below in this post.
  I notice that you have a user.js file require separately.
  Post back saying that you tried and what the results were.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

• Why am I not allowed to display the Microsoft Windows event log, even if I have a user administrator account?

  I need to run Microsoft Word 2007 Microsoft Office Diagnostics. Even though I turn off User Account Control it still does not.

  The reason why I want to run the diagnostics, is trying to find out why the custom templates always freezes up in Word. First the cursor starts to disappear and then Word hangs.

  Word:

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your question Word when repost you in the Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Hide the subform if the field is null

  I have this script on a text field change event:

  If ((this.rawValue! = "null") |) (this.rawValue! = ""))
  {
  checkBoxThree.presence = "visible";
  }

  on the other
  {
  checkboxThree.presence = 'hidden ';
  }

  It displays correctly the checkBoxThree subform when the data entered in the text field.

  However, if the user goes back and removes the text, I want the subform to become hidden and is not. How can I change the script to achieve this?

  Thank you

  MDawn

  Hello

  try this script:

  checkBoxThree.presence = xfa.event.fullText.length == 0 ? "visible" : "hidden";
  

• For the expansion of the subforms page breaks

  Hello

  I have a new form of training Rquest I design. I have a little trouble though, as I was hoping I'd be able to get parts in expansion of my form to move to the next page. I created the form to be dynamic, so that you can click on a button that uses the management authority to create an another subform. So, you'll have something like: "Add teacher" which adds a new line where you can enter information about the teacher.

  I also configured so that pressing a button, a new section will appear to enter more information. The problem comes when I try and create a new one of them and it goes off the page. He SHOULD go to the next page, but I can't understand why it isn't. I checked all options and as far as I can see, all that allows page breaks, the subforms seem to work and really at this point I just need someone else to take a look.

  I could do the shape so that it is a new visible page I already did but I rather it the correct way rather than the lazy way of just copy - paste.

  If anyone is interested to help me, let me know and I will send you the form you since I guess you can't add files here and the section I need to look at is several hundred lines of XML, so it is no good either. (using LC version 8.2, incidentally)

  On an unrelated note, I noticed I'm getting lines repeated in my forms in the XML file. This issue has actually caused some of my forms to be so inflated that I can to open the XML tab because LC crashes. I realize that it is a problem with version 8.2 they were set for 9 but I don't have version 9 and I'm not going to buy it just for this problem. So if someone knows what can cause exactly this cette copie copy XML lines, let me know if I can try to avoid this.

  The lines I copied most often look like this:

  <? templateDesigner styleId aped3? >

  They still model files. I think it might be in some way related to copy - paste of my tests? Anyway, any help would be appreciated on a problem. Thank you all!

  The problem you describe is a bug in the product and is caused by the copy and paste content. This was solved by upgrading to a new version of the designer. you would simply open the file in the designer and the file would be automatically cleaned. So if you want to stay on this version you will have no choice but to live with the problem of repeated lines.

  The new number is because you have set the field as a TextField, so it's the addition of channel 1 with ahatever else you do cross... like you pointed out... making digital allows you to add math instead of adding the string.

  Paul

• WHY THE PHOTOS KEEPS 2 IMAGES IN A SINGLE ALL THE PHOTOS AND THE OTHER IN MY FILE, I DID?

  I STARTED WORKING WITH PHOTOS. I WAS PUT IN FOLDERS AND ALBUMS, BUT I NOTICED THAT THE PHOTOS ARE ALWAYS IN THE TOP FOLDER THAT SAYS THAT ALL IMAGES?  WHEN I TRIED TO DELETE ONE OF THEM IN ALL THE IMAGES IT WOULD ALSO REMOVE IN MY FOLDER?  WHY ISN'T GOING TO BE DOUBLING YOUR SPACE?

  1. you need to fix your cap lock - ad in capital letters is rude and very difficult to read

  2. you need to learn how to post - you posted a question of photos in the iPhoto forum - towing totally different programs - I ask that your message be moved

  3. you need to learn how works photos - he is a database application and has no duplicates - all photos are in a library, and can be seen in different ways, but not matter how manny albums (once more records cannot view pictures, albums can only) a photo is in there is no duplicates - just different views of the only picture in the library - multiple windows in the same room

  LN

• Structures of parallel event on the same trigger events

  Based on information gleaned in this thread [using ends records], I think what I'm trying to do is impossible and so intentionally. But it would be so nice. Here goes:

  Given an event and two dynamic records for this event, is it possible to capture the event simultaneously in two structures Parallels event?

  I understand why it is generally undesired behavior, but it save me considerable grief [vote]! If it is possible. Here's what I do [uh, trying to do]:

  I have a set of SVs published network which are written in an acquisition of data VI. A VI of dynamically fits to the OAS events, Web method handles events [send new values SV making HTTP], and then unregisters before complete execution. When I run the VI web method via a URL request, the client sits and waits for a response until the SV is written to, and then correctly receives the data from the web method VI. So far so good. However, there are two cases where things go very wrong:

  1. several customers call the web method

  2. a single client calls the web at a rate faster than the rate of events

  In both cases, several instances of the web method are active and pending events simultaneously. When a new SV event is generated, one of these web methods it will resume. In the first case this means that only one customer will receive the new data. In the second case, no SV event is detected indefinitely - web method instances in addition to more accumulate. Even if I use a case of timeout to kill the old instances of the web method, the OLDEST we capture new events and the client will not recognize a response to the new instance.

  I anticipate using the customer of the poll, although it will be not as pretty as using the structures of the event. Am I wrong?