Why the TDMS file is bigger that we should

Similar Questions

• Why the mp3 files will no longer load or error sometimes using html5 in Safari 9.0.2 player?

  I installed El Capitan last night and found today, since I worked on my blog, that the 'common' reader audio html5 that I use on every page returns a 'mistake' when loading mp3 files in Safari 9.0.2

  The old version of Chrome and Safari worked (loads mp3) works like Firefox.

  All I have this problem or know why the problem exists?

  that said the error - verbatim - GOLD - publishes a screenshot here

  do you provide Apple with your comments on the issue - in DETAIL - here > http://www.apple.com/feedback/safari.html

  * Get your "ducks in a row" before providing feedback (or ask Questions here) including the number of screenshots, wallpapers, URL, version, etc.

• Import data from the .tdms file and comparing with the measured .tdms file

  Greetings,
  I want to make an application that writes the values measured in a .tdms file.
  But I want to do a separate database in a .tdms file that contains the theoretical values.
  After the measurement, the application must compare the measured values with the theoretical.
  If the application needs to read that a cell of the .tdms file.
  Is this possible?

  Thank you

  Here are some materials:

  http://www.NI.com/white-paper/3727/en

  http://www.NI.com/white-paper/5696/en

  I also recommend that you can start with examples of PDM in LV to get acquainted.

• Get "... a file and invalid format." (Error no. 11) "when you import the .tdms file in DIAdem 11

  I developed a script to process the .tdms file in DIAdem 11.1, now I deploy the script on the same PXI system that created the .tdms file.  This system had DIAdem 11.0, but when I try to open (DataFileLoadSel) the file tdms in my script, I get the error message:

  "D:\MyFileName.tdms" has a format invalid gall.  (Error no. 11)

  Tdms files are created by a LabView application.

  If I delete the index correspondin .tdms file, I get a little further, it loads the first two of the four groups, using DataFileLoadSel on the first group and DataFileLoadRed on the 2nd group, the third group, another DataFileLoadRed, I get the following error:

  Error in (line: x,: y):

  Unable to load the 'D:\MyFileName.tdms' file with the charger "TDMS.

  Additional information:

  Cannot open the file 'D:\MyFileName.tdms '.

  Is there a difference between DIAdem 11.0 and 11.1 affecting the .tdms file import, if I can get around it?

  Thank you

  Eric

  Hello eberg,.

  Before we get into more detailed error recovery, could you please try to install the format TDMS 2.0 on the computer of DIAdem 11.0 (DIAdem 11.1 and LabVIEW 2009 come with TDMS already installed 2.0 stuff).

  Hesitate not to download it here: http://zone.ni.com/devzone/cda/tut/p/id/9995

  Once installed, please try to run the Scripts (in DIAdem 11.0) and let us know if that fixes the issue. He could not help to install this, but it's a quick thing to try before dig us more deeply into the question.

  Best regards

  Otmar

• Why the .cod files change download to download?

  I do some tests on my BlackBerry (Bold 9700) of security and when I use JavaLoader.exe to download the .cod files I noticed that some of them will be different from download to download.

  For example if I do the following:

  > JavaLoader.exe save Sudoku_v46_480x360

  > cp Sudoku_v46_480x360.cod Sudoku_v46_480x360.cod.1

  > JavaLoader.exe save Sudoku_v46_480x360

  > diff Sudoku_v46_480x360.cod Sudoku_v46_480x360.cod.1

  The files will be different.  I compared the in a hex editor and the differences are small (single-byte) and coherent (0x07 in 0x77) in 10 places in the file.  They seem to be divided as wel.

  -What is JavaLoader.exe done or there at - it something on the device itself that constantly updates the application?

  Thanks for any idea!

  Never mind, just found out why this is happening.  Some of the .cod files (if there is more than 64 k I think) will decompose in a zip format and zip headers may be slightly different (last modified time may change) then the global .cod file will be binary different.

• Why the temporary files are created?

  Original title: temporary files

  Hi, I searched the Web for a long time to know "why the temporary files are created?"
  what I understand so far is there are temporary files created by MS WINDOWS, and others created by other applications like MS OFFICE APPS? RIGHT?

  - and understand that they are created for purposes of backup in the case of MS OFFICE applications,- and I do not know how? they are created when the App crash or every few minutes or what?

  - and I do not understand why "windows Temp files are created?"

  Show me examples please.

  Thank you

  Hello

  There are many reasons why temporary files may need to be created.

  Windows temporary files
  https://support.Microsoft.com/en-us/KB/92635/

  Wiki - temporary file
  http://en.Wikipedia.org/wiki/Temporary_file

  Wiki - temporary Internet files
  http://en.Wikipedia.org/wiki/Temporary_Internet_Files

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• the fonts on my dashboard a lot bigger that they should do and window fonts are so small that I can't read, what is happening?

  the fonts on my dashboard a lot bigger that they should do and window fonts are so small that I can't read, what is happening?

  This has happened

  Each time Firefox opened

  == Not sure when it started, it was 2 or 3 weeks. I have reset the resolution on my computer, but does not seem to affect it. I recently added google gmail, can that have anything to do with it?

  Hi Polly.

  You may have a problem with an extension or plugin that obstructs normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  In all cases, prove a screenshot would be useful.

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• How to replace the SWAP file. SYS that bulky and bulky?

  Hello

  My question is how to replace the SWAP file. SYS that is bulky and bulky?

  Is it possible to "BRING" different "restore points" as separate files and reduce in size for the management and portability?:

  The simple answer to your question is no!

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Why the prores files original with stereo tracks into first on the single audio track?

  Why the Prores files original with stereo tracks into first on the single audio track?

  Here are a few ways.

  Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

• With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way t

  With previous versions, I could press control (mac) and click on a layer, and he would choose this graph, what form it was. Then I could go to image-culture and reframe the entire file down to that size. Now, this feature is missing. What is the new way to do this?

  This is the command key, not the control key for a Mac that you use on the layer.

  Gene

• I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results

  I have problem in the PDF export to save only the layers appeared only. When I export the indesign file to PDF that contains layers hidden pdf placed, pop up problem when I use the search field in exported pdf file. hidden text of hits from search results to laye

  I answered your question: there is nothing you can do in InDesign. You need to ask in the Acrobat forum I linked.

• Why the html file that I downloaded from the internet will not open in Dreamweaver?

  I tested other pages to index and their linked pages and they opened in Dreamweaver.  I applied the same steps to this file, but it still not open.  All of this linked pages / index associated is open in Dreamweaver, but not the index page itself.  When I double click on the index.html file, it opens in the browser and the links work.  If the file is damaged in any way can it be repaired?  I checked the index.css file, but I see nothing wrong with it yet.  Can the html or css file contain code that prevents the files open in Dreamweaver, and yet still be opened in a browser?

  Of course, you have all the support files.

  Nancy O.

• Name of the TDMS file for use in Diadem report

  I received a large number of TDMS files collected with Signal Express 2014 and all of these files are called voltage.tdms in several subfolders, when I opened a sample of these files in Diadem I see that they have unique names in the field title properties voltage.tdms and so I would like to use this in a report model that I created. What I failed to find it is an easy way to capture the value of this title and put it in my report model, there is a variable called ChnDataFileName name, but it gives me "voltage.tdms", I don't see any of these variables to extract the field title, anyone know how to access this field?

  Hi ADobson

  The easiest way is to drag & give up the property from the data of the report portal. Then you will get something like

  Title: @Data.Root.Properties ("title"). Value @.

  Hope that helps

  Winfried

• Extract strings in the tdms files and write the strings in the file txt or lvm

  Hi all

  I'm struggling to extract strings from a file of tdms to write them in a txt file.

  The strings were written in tdms is a time stamp data recorded to a compact RIO.

  I put the chain in a different group from the PDM, but when I use the function read tdms with the group name, as I said, an error message is always take place.

  Thanks for all the help.

  PS: I have attached an example of tdms file I got over here.

  Kind regards

  Yifeng

  I tried your attached file and it seems that everything goes file. I have attached the screenshot of my VI here, what do you want?