Why when you move a window outline of the rectangle of the window moves first

Similar Questions

• Firefox 17.0.7. Display the menu, when you are using extended view (Win7), flickers off when you move the slider to a selection. Reg FF version works fine.

  Using Windows 7, view extended., Firefox 17.0.7

  Firefox menus (file, editing, etc.) and user bookmark lists flicker in and out of visibility when you move the slider to a selection. This happens on the primary display only the second screen. It does not occur on regular product version (23, etc.) and does not occur on any other application.

  We are required to use version 17 on internal business machines.

  Bob Hello, that might be a problem with hardware acceleration - try updating your graphics driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• T60 freezes when you move the trackpoint right after starting

  Hello

  I had this problem for quite a long time. Initially, I thought that it was due to an update to Windows XP, but I couldn't find any message on newspapers when the laptop crashes. I reinstalled XP many times to get rid of any incompatibility related to the software, but even with a new installation, it was happening.

  I realized recently after several tests that the problem occurred more frequently when you move the mouse (trackpoint or touchpad) just after the start of the system (cold start or start of hibernation). What I discovered is that this will happen is no longer if I suspend the laptop after starting the system, do not touch the mouse.

  The symptoms are that Windows freezes. No activity at all HD, the system responds to any keyboard and mouse input. If I close the lid of the portable computer system is not put into hibernation. The only way to regain normal operation is pressing the button for a few seconds, then the system turns off, and then turn on normally.

  All the drivers are up to date.

  Someone at - there experience this problem?

  Thank you

  Try to remove the battery... If the battery is dead, it could give you this problem...

• Error messages when you move files PSE13 and PSE14

  I am reorganizing my records of PSE 14.1 (and a few hours before using the PES 13) on Windows 10. This means that I'm moving them from one disk to another using the view of folders on the left panel of the PES.

  Everything goes very well with the first shift after the launch of PSE. No error message and the files in the folder find you in the right place with the folder.

  But for much of the subsequent move there is several error message boxes that must be pressed one by one to move forward. Much more than the number of files involved. However, ultimately files and folders get into their expected places. But with dozens and dozens of needless (?) Click on the OK button.

  Error messages that I see are

  • "A folder with the same name already exist in the requested location" - which is patently false, as I'm only moving called records and verifying that I won't have existing folders with the same name instead of the target. The record was 16 photos inside and the message popped up 55 times.
  • "The operation could not be performed. "The error occurred because of invalid characters, read only location or existing folder with the same name"-this comes very often after the message stated above, but not always. And in multiples as well.

  And every now and then the move operation is going well through.

  I tried to understand if there is a model - but nothing so far... I use no "special characters" in the filenames etc...

  Is there another way to move the folders? Is there a solution to this behavior?

  juhar76990688 wrote:

  Looks like I have at least found a way easier and more predictable and easier to reorganize my files: travel using Windows file / folder management tools-, then to reconnect files from PSE. In this way, I know how many dialog boxes, I need to treat every step - and it is much less than the way PES...

  Yes, it was what I was going to suggest it.

  I did not PSE14 because I'm away from home now. I've already met these messages before, and I think you are right that the first time you move a folder to a new empty destination tree, you do not have problems. I would not be surprised if there was a real bug in the display of folders when you move files repeatedly, but I was not able to reproduce the problem. A possible source of problems would be the way the folder hierarchy is updated in elements; I guess that to keep this folder updated tree, there is a procedure of "cache" to speed up the process (folders display in the tree should work with an image of the Explorer, supplemented by information in the catalog itself). Older versions were very buggy in folders view, but I'm not sure that the current version (since PSE11) is absolutely foolproof.

  Move the folders step by step from the Explorer and reconnect immediately seem to be the best in your case.

• Size of the image changes when you move an image between Lightroom and CC.

  Size of the image changes when you move an image between Lightroom and CC.

  I opened a .dng image in LR and then opened it in the develop module.  I clicked on Crop Overlay and then on the "As Shot" (the lock is closed) menu drop-down and cropped to 11 x 17 and click 'Done '-.

  I click Ctrl-E and the image opens in the CC.  I click on the Image > Image size and the size of the Image is 13,288 inches on 20,533.

  Why change the size of the image?

  I believe that there is a menu to control the size of the image, and I've looked everywhere I see in LR and CC, I have googled various descriptions and I checked both Kelby books, but I can't understand not just how to keep the image at a uniform height when moving between LR and CC.

  Help!... Please?

  The size of the image has not changed. The number of pixels has not changed. Let me tell you. The number of pixels has not changed to a single pixel.

  The numbers relatively meaningless displayed by your software have changed.

  The image is always format 11 x 17 (17 divided by 11 = 1.545 and 20.533 divided by 13.288 = 1.545)

• with the auto more recent updated version of firefox now there is a white bar that appears when you move your mouse over this area. I want that gone, how?

  When you move your mouse below the address bar opens a white bar, making it so you can't click on buttons or links on sites, like buttons connection for example. also when using the full screen, you can no more mouse on the tabs at the top of the screen, only this white bar appears. This prtty much kills its use full screen for me. Thus, this white popup bar and mode full screen with the white bar without tabs firefox has pretty much ruined it for me. in any case to fix it would be great.

  Launch Firefox in Mode safe
  
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration.

  ===================================

  Hello

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• In number. How do I lock you in a function such as highlighting a cell so it does not disappear when you move to another cell.

  In number. How can I lock you in a function such as highlighting a cell so that it does not disappear when you move to another cell.

  Hi Philil,

  Do you mean pointing out the contents of a cell, or "stressing" the cell itself (by placing an on bottom border)?

  Formatting content will transfer to another cell if you fill in the other cell content, or copy from a single cell and pasting it into another.

  Borders applied to a cell or group of cells may be applied to another cell or group of cells by selecting the first cell (single click), the format of this cell or a group of cells copy (Format (menu) or option + command + C > copy Style), and then selecting one or more other cells and stick to the format (Format (menu) or command-option-v > paste Style.)

  'Format' in the case of cells includes the color fill, color text and other text attributes, content, format (text, number, date & time, duration...), borders...

  When you copy the style, all format attributes are copied.

  Kind regards

  Barry

• Blue screen when you log in windows server 2008 r2

  When you connect in windows server 2008 r2, all I have is a blue screen and the mouse.

  I tried to search for solutions on the internet, then I found a microsoft patch "http://support.microsoft.com/kb/2590550" I have run the fix command line but he gave me nothing, no error or success messages.

  I tried to restart but I still have the same problem.

  Is there a solution to this problem?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Error message Windows XP released "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp

  Error message Windows XP Home Edition comes out "generic host process for win 32 services has encountered the problem and needs to close" when you log on windows xp. I found the article exactly to what I have experienced http://support.microsoft.com/kb/821690 but as far as I know, this issue is not caused by an old HP printer. Can you give me the steps to fix this problem other that that link I mentioned. Thank you.

  Hello

  ·         You have a HP printer connected to the computer?

  If so, try the article you mentioned.

  Generic host process error message and a flashlight icon appear

  If this is not the case, check to see if this article helps you.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

• Hotmail problem - "Please refresh your browser window. When you access your Windows Live Hotmail account from more than one computer"

  How can I solve the problem with this message: "Please refresh your browser window. "We ask to reconnect when you access your Windows Live Hotmail account from more than one computer, help keep your account secure and private.

  Thank you for visiting the Microsoft answers community site!

  The question you have posted is related to Windows Live Hotmail and would be better suited in the Windows Live Solution Center.

  Please visit the link below to find a community that will support what ask you

  http://windowslivehelp.com/forums.aspx?ProductID=1

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "load error" message when you connect to windows vista account___

  When you connect on windows (vista) to my sons account, a window appears with the Dll Run in the upper left corner and a message that says: error loading C:\Users\... it indicates the name of my son, then - Home\AppData\Local\l41DMut.dll.  It does not appear on the admin or any account of my other children. (parent) account.

  I have tried to download a Web filter, but could not.  I wonder if this error message is the problem.  Even if this is not the problem with the download works do not, should not be there.  You can click on the x to close the box (it always appears twice) and then open Mazilla Firefox, etc.

  What is going on?? Can you help me?  Thank you!!

  Google has nothing for it; normally, who points to him being Malware...

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• T61 freezes completely when you move

  T61, model 7658CTO

  a year, still in warranty: 2 G of RAM, Vista Home Premium, Duo Core 2.4 GHz

  The day I bought and he ran, he hung up 7 times. Slowly, I learned to limit the number of processes, I ran and he hung up less.

  But every time you move even if laptop you slowly pickup the phone and move it to another table, it's like the laptop is going to be delayed. and if you try to do the simplest thing, all this hangs completely (frozen screen), leaving no other choice than to power it completely down and restart. Now its getting annoying coz I have to take it for conferences and Yes...

  I have not formatted the laptop ever. So I thought maybe theres too much software preinstalled junk on this topic. Other diagnoses? Pleeease...

  the freezing of the process when you move the laptop, is due to the shock of Thinkvantage APS protection, which stops your drive hard when it detects a movement, to try to turn that off and see if your laptop still freezes when you move.

• What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Original title: name/location of the executable that runs when you click on detect monitors?

  What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Hello

  Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories/

  It will be useful.

• How do you disconnect hotmail in windows 8 (when you dream in on email on the main screen icon)?

  How do you disconnect hotmail in windows 8 (when you dream in on email on the main screen icon)?

  I found a solution but it takes several steps, and the average user will never know how do it.

  (1) when your Hotmail account is opened in Windows 8 press the keyboard windows key and the letter 'I' at the same time.

  2.) on the side right under, click "Accounts" "settings".

  3.), click your Hotmail account that will accomplish.

  4.) downstairs there is a box "Remove all accounts" click it. Don't worry, this does not remove your Hotmail account or any account, it's just signs than you. You have to click on the box twice that a notification saying your data will be always preserved in the clouds.

  5.) go back and check the mail application, now you will be asked to you "try again" and it takes back you to the login section.

  Phew, both pis Microsoft na not happen to a better solution. As I said, I see a lot of prosecutions and a lot of divorces because of this.