Why Windows 7 not Explorer works best with folders and files

Similar Questions

• Programs not working, disappearance of folders and files, yet no virus

  Over time programs have stopped working in what they does not, or if they did they took time and then would not always display the content. Then I found the shortcuts in the way that a white square or endangered, followed by the files themselves.  Those I've had problems with is windows media, the speakers in the lower right corner, folder my pictures, my music, DSS player and Windows Media Player folder. I did a system restore and it is just the speakers. In safe mode programs and missing folders still appear or work. Malware and virus controls come own. What remains?

  Hi KarenBadcock,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Method 1
  Diagnose and repair Windows files and folders problems automatically
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2
  You can try to launch the Microsoft online safety scanner and see if that helps.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: When you run the antivirus online scan, you may lose many Citron of data that are affected by the virus. Microsoft is not responsible for the loss of data.

  Method 3
  SfC scanner to replace the missing system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4
  Perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• 2 operating systems: Windows 7 makes all folders and files on another partition (Windows XP) read-only! What now?

  2 operating systems: Windows XP and Windows 7

  Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!

  Once, I opened a file from "My Documents" from XP in Windows 7.

  But when I Wen back to Windows XP.

  But while starting up, I got a lot of error messages:

  Access denied!

  When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.

  But after I tried to void that lookt again to see if she had cancelled it.

  But he remains unalterable reports!

  I have lookt on Google and Bing, but could not find someone with the same problem!

  Now it works!

  I used these 10 steps to solve the problem!

  10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):

  1. press F8

  2. select Safe Mode

  3. log in with an administrator account

  3. go into the properties of the folder / partition / file that you cannot access

  4. Select security and then advanced

  5. in 'owners' define yourself as an owner (if it is not defined)

  6. click on 'Ok '.

  7 configure yourself: make sure you clickt on the box "Total control" (allow)

  8. click 'OK' and then 'apply '.

  9 reboot

  10. the test (if it still does not, try again a few times)

  ____________________________________________________________________________

  And then it worked!

• I recently had to have my rebuilt computer caused by a virus. Now I have Mozilla Firefox with ABP and noticed that Mozilla has a built-in phishing and virus program. Do I need another antivirus program and if so, the one that works best with Firefox?

  I recently had to have my rebuilt computer caused by a virus. Now I have Mozilla Firefox with ABP and see that Firefox has a program's built-in phishing and viruses. Do I need a program additional anti-malware? If so, the one that works best with Firefox? Seems put more you on these things the you have more trouble.

  The anti-phishing protection and malware that Firefox uses checks against a list of websites that have been reported to contain a form of malware and then alerts you. Firefox itself does not scan files to see if they contain viruses/malware. You still need a form any anti-virus and anti-malware protection. You must also use a firewall.

  As for which is better, you are likely to get many different answers, it's a topic that generates a lot of discussion. A product one person loves will be hated by someone else. I use Microsoft Security Essentials as well as Windows Firewall.

• Why can I not use ready boost with flash player in my home premiun wvista?

  Why can I not use ready boost with flash player in my home premiun wvista?

  Hello

  This Flash drive is probably too slow for configure ReadyBoost.

  Here is some information that should help you:

  ReadyBoost
  http://www.vista4beginners.com/ReadyBoost

  What is ReadyBoost
  http://www.winvistatips.com/ReadyBoost-T25.html
  Explore the features: Windows ReadyBoost
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READYBOOST
  LOAN - many are lying or stretching at least the truth. Look at the sides of the player below
  and buy one you know is FAST.
  
  Don't forget that the readyboost max cache is 4 GB Vista and 256 GB Windows 7. If your device
  is more than you can use it for storage. And you need a fast reader.

  ReadyBoost - list of speed Flash memory
  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  How to find the index of ReadyBoost speed
  http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

  Speed tests USB Flash Drive - any size car - link to the utility USBDeview
  http://usbspeed.NirSoft.NET/

  Publish a speed test of your USB - also a link to the utility USBDeview flash drive
  http://usbspeed.NirSoft.NET/publish_usb_flash_drive_speed.html

  http://www.grantgibson.co.uk/misc/ReadyBoost/?make=SanDisk

  http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What apps work best with the pencil

  What apps work best with the pencil. Particularly interested in commenting, highlighting and rating photos and graphics.

  I like 'Fame' for handwritten notes. "Annotable" is good for the annotation of pictures and graphics. Recently, I started using "Ultimate NoteLedge" and learn what it does yet. But so far, I like it, too. And then, everything that made Adobe.

• Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  Why you do not have your products with different colors? compatible with the colors of the iPhone or the iPad? Example: Gold Earpods, silver, BLACK and Rose Gold.

  You say Apple your wishes on the link below.

  http://www.Apple.com/feedback/

• What storage Fusion drive or Flash storage solution will work best with Adobe CC software on iMac 5 K retina?

  Hello

  I use Adobe CC per day, mainly Premiere Pro but also After Effects, Illustrator, and Photoshop.

  I'm buying a new iMac 27-inch 5K retina and I was wondering what is the best soltuion storage Fusion or Flash storage drive?

  Which drive will work best with Adobe products and graphics software and similar movies?

  Thank you

  Hmm, if you're looking for performance Combo: speed + storage memory , you can go by car merger.

  However, you can find test for Fusion V/S Flash Player storage on popular Tech sites. You can check the speed of DataAccess speed, storage performance... Speed of reading data, writing speed of data.  so that you can decide, also for the best recommendation, post a thread on the Mac community, so that you can get real answer to multiple users who use drive merger or tried the two Fusion as well the Flash storage.

• In Windows 7 Windows Explorer shows do not all drives, folders and files?

  I have windows 7.  In older versions, Explorer windows would list all drives, folders and files.  It makes it easy to move, copy, create folders.  Is it possible to get mine to do the same thing?

  Click on the Start button and then on the images in the list on the start menu, top left is organize, click on this list, then click on folder and search options, go to the view tab section, search for and click Show hidden folders files and readers, click apply and OK.
  

• Why used my lifecam vx5500 work? XP - sp3 and ati 2400

  Why used my lifecam vx5500 work? XP - sp3 and ati 2400

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. do you get an error message?

  Step 1: Try to run the fix it tool to the article below and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Download and install the drivers for the webcam using the link below.

  Drivers, software and documentation of your product
  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5500

• Why do I suddenly had a .qif with bank transaction file appear on my desktop!

  Why do I suddenly had a .qif with bank transaction file appear on my desktop today that were not there when I turned it off last night

  Hello

  1. have you made changes on the computer before this problem?

  2 are you able to open these files before, have you seen this message before popup on your computer?

  3. is there someone else your computer?

   

  The. QIF file is and ASCII text file. While you can view and edit the file in any text editor, be very careful as the format of the file and the order of the items in the file are essential for the proper execution of the file.

  NOTE : If the files are reappears or multiply on its own, so I recommend you to run the Microsoft Safety Scanner to remove all viruses in the computer that could create this file. Viruses are known to come. QIF file format. I suggest you to not open files if you are not sure about this and rather wait for the Microsoft Safety Scanner complete to ensure that it is not virus. Once the analysis is complete and the threat of virus cleared so you can view the file. If you think that the file is not linked, then you can remove the same.

  Run the Microsoft Safety Scanner and check if that helps resolve the issue.
  
  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note : the data files that are infected can be cleaned by removing the file completely, which means there is a risk of data loss

  Also try to perform a clean boot and check.

  How to solve the problem by running the clean boot in Windows Vista: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual

• Right click mouse to drag and drop or rename folders and files does not work

  For a few weeks now, I had problems with the right click function to drag - move files and folders, or rename files and folders. This happens when I use windows Explorer or access to the computer and click thruogh for a feature. He can't go to all the folders and files, but many. I can't right click on these folders or files to change the sharing because explore closes and restarts on the desktop with a right-click. Manifest error "appcrash" reason. I have Norton Security suite installed and neither Norton or your fix program detects a problem.

  Please notify.

  awehnert

  Have you installed or removed/uninstalled all hardware or software or drivers since just before the start of this problem (if so, exactly what - name, version, device, whatever)?  Norton take any infection, although it is said that he cleaned their since just before the problem started?  If so, you know the names of these infections?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  It's been a while so I'm not sure that you have a fairly old restore point but it is possible - hopefully.

  Are these files and folders in your user profile?  If Yes, your user profile may become corrupted (in fact, if can still be corrupted if the folders are not there).  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.

  We will check some of your system files and hard drive for ccorruption that may be the cause:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to start at the next startup.  Okay, then restart so that the program can run. It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Please checkwith the manufacturer to find out if there is a mouse driver updated (software or firmware) available for your make and model of mouse and your version of Vista.  Download and install to update the driver to the most recent available and see if that solves the drag and drop problem (even though I know that this will not affect the question of the name change).  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it doesn't (or if SFC detects corruption it cannot repair), we you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Non-alphabetique of the folders and files in Windows Explorer

  Why the my folders and files in the right pane sometimes not listed in alphabetical order in the Windows Explorer window when I click on a folder in the left pane?

  Tuesday, September 25, 2012 16:52:36 + 0000, Condor1A wrote:

  Why the my folders and files in the right pane sometimes not listed in alphabetical order in the Windows Explorer window when I click on a folder in the left pane?

  The order in which it appears is the order of your choice. To change the order,
  Click the heading of the column that you want to sort. Click one
  second time to change the Crescent in descending, or vice versa.

  Ken Blake, Microsoft MVP

• Why is the uncompadible again toolbar google with ff5 and his long, since the introduction of ff5 why havnt u fixed it

  Why is the Google toolbar always uncompilable with ff5 and his long, since the introduction of ff5, why do u not have this fixed

  You are welcome.

  Please click the button solved it next to the answer that meets or solved your problem of Firefox support, it appears when you are connected, so this thread is marked as solved to help other users who may have this same problem.

• can not update software adobe reader IX error windows do not have sufficient rights to modify the file

  can not update software adobe reader IX error windows do not have sufficient rights to modify the file

  Hi janl35265451,

  Make sure that you are connected with the Admin account to install the updates.

  Open the drive, go to the Help menu & "Check for the Updates.

  Kind regards
  Nicos