Why Windows 7 Won't back your work on my Google Drive folders?

Similar Questions

• Why Windows 7 extremely slow on your laptop just multitasking ordinary?

  Okay, so it is a mystery to me. I'm a tech guy, btw.

  The scenario: I use a little old laptop with 2 GB of RAM. Have virtual memory turned on,

  In ADDITION, have a very fast USB plugged into USB 2.0 and implemented with 4 GB ReadyBoost.

  Using Windows 7 and this notebook can handle.

  Normally, the laptop works very well and is sensitive with place for 4-5 open applications. However, recently,.

  When I open several pages in a browser, it will slow down abruptly to the point where it takes 30-60 seconds

  Press the close button on a page and see my click and everything is not responding. I'm not talking about slowing down a bit,

  I want to talk about a sharp slowdown in the overall system which lasts 10 to 20 minutes, until what I managed to close some windows,

  each takes about a minute to close. Then it accelerates again.

  I checked the memory usage, and my programs use not yet 2 GB of physical RAM when this slowdown happens! But even if the

  pagefile is written it there is no way that this should make Windows so brutally fails. In addition, I have too many 4 gigs of readyboost.

  Something is very wrong with that and I'm curious as to why this phenomenon occurs and how can I solve it?

  No I don't have any spyware, as I said I'm a tech person, this is the basis. I know all this,

  It's something to do with the way Windows is not able to be managed properly.

  An overview of what on Earth is happening here would be greatly appreciated.

  Thank you

  Hello

  IE uses a lot of resources, especially CPU is what you slow down as only
  have 2 GB of physical RAM. ReadyBoost can help, however, this is only disc (caching speeds
  reading on the rise) and is not a replacement for real RAM.

  ===========================

  Here are a few troubleshooting methods:

  Explorer Windows stopped working
  http://support.Microsoft.com/kb/2694911

  Windows hangs or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those without drain in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 8 Pro key does not work after changing HARD drive

  I had bought a Lenovo machine without installation of the OS and installed a Windows 8 Pro (and not an upgrade).

  After activation ( laptop settings-> activate Windows ) and control, the copy of Windows has been properly activated.

  The machine worked fine for 7 months before the hard drive crashed and I had to replace it. (Without recovery).

  On installation the same Windows 8 Pro on the new HARD drive again, it shows " this key did not work." "If please check and try again or try a different key"

  Please suggest a solution to this problem.

  If my copy of Windows would have been an upgrade version, it would not have worked the first time.

  Have you bought a copy of manufacturer of OEM of Windows 8 Pro system? Because there was no full version boxes retail copies of Windows 8 Pro. The following work around to try to see if it works with your copy and then try the phone activation;

  http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html

  Activation of the phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Why windows Explorer crash everytime I open a folder in google reader

  When I click on the 'open' on google, drive icon, NPO windows Explorer showing the files in the player,
  When I try to open a folder or file that explore comes back with a message saying that he met an error and needs to close, it does.
  I have any character disk on another computer and there is no problem

  Hello

  Perform the check and the clean boot if service non-Microsoft causes a conflict for the problem to occur. Check out the link and follow the steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

  Alternatively, you can contact Google Reader support. Check out the link.

  Google Drive
  http://productforums.Google.com/Forum/#! / Player forum

• Why Windows 10 PC can't see iPhone as a hard drive?

  Just updated the iphone to ios 10.0.2 6 and now my PC 10 windows Explorer does not show the phone as a hard drive.

  I updated itunes to 12.5 and itunes sees the phone.

  Hi GSObob!

  Joe_7399 helped me to solve the same problem, check out our conversation: iPhone not recognized by the PC but recognized by iTunes

  I hope this can help you too!

  Good day!

• Why Windows 8 won't install correctly?

  Monday, July 28, 2014, I was playing a game on my computer when it suddenly crashed. When I try and it starts up, it attempts twice and then goes to the auto repair. Then comes a screen saying that the auto repair has failed and has a directory. I thought, no problem, I'll just do a clean install of Windows 8 because I don't have something important on this computer. When I install Windows (per disk), I choose the custom install option, then I format the partition containing all of my previous installation. Once it is formatted, I click Next and it starts to install. He gets everything ready and then restarts as part of the installation. However, once it tries to start, it fails and gives me a message along the lines, "Windows has reached and unexpected error or restarted unexpectedly." Windows cannot continue the installation. Please click OK to restart your computer, and then restart the installation. "Once I click OK, it restarts the computer, and then the message appears again. I built this computer and it worked fine without any problems for 2 years when he crashed and caused all this all of a sudden. I also spent the last two days scouring the internet for a solution and trying to fix the computer. I tried several times to install Windows and now when he asks me to choose an operating system, there are five options of Windows 8. I tried to go into safe mode, but a message pops up saying that I cannot continue installing in safe mode and restart the computer. I tried to reset the computer, but it gives me just a black screen while it resets the computer. I tried to update the computer and when it finishes, it restarts, the Windows loading screen comes up and it says: "Preparation devices" or something in that sense and then a black screen. Now, I don't know what else to do and I'm very frustrated. Here are my system specs:

  CPU: AMD FX (tm) series 6100 6 hearts 3.30 GHz

  GPU: AMD Radeon HD 7700 series

  RAM: 8 GB

  MOTHERBOARD: ASUS

  PSU: 750 watt Corsair

  Thank you for your help.

  I would like to replace the card as in your original post, it crashed while playing a game.

  While you have the control of double cover case removed to see that the card is inserted completely and if there is a second power connector located at the back of the card that the cable of the power supply to the card is also connected and inserted at bottom.

  J W Stuart: http://www.pagestart.com

• Why Windows 7 won't remember my Desktop Slideshow setting after using Remote Desktop for it?

  Probably need Windows 7 Professional or better to do, I don't remember what editions have Remote Desktop.
  I really love using the Windows 7 with desktop slideshow feature. I have a very large amount of funds in a folder of wallpapers which I configured my 'theme' customization which is supposed to spend on a daily basis.
  Usually, the scenery change as they are supposed to, but very quickly, I noticed that once school started, the same background blocked for awhile. After resetting the setting time and time again, I noticed that the background changes is no longer after that I used another machine remotely in this machine.
  While I understand why turn off desktop slideshow arrives for remote desktop, why didn't he re - turn on desktop slideshow after disconnecting the remote session?
  Steps to reproduce:
  Computer 1: Turn on Desktop Slideshow in customization (Customize, wallpaper, choose a background screen, use fill as a position of the image, change image daily 1, mixed). Save the changes. Save this theme with any name, for example 'the mine'.
  Computer 1: right-click on the desktop: notice that she has 'Next wallpaper' from the context menu.
  2 (Windows XP) computer: Remote Desktop connection to connect to computer 1.
  Computer 2: Close the Office connection remotely using the [X] button on the title bar of masking (disconnection without disconnection).
  Computer 1: Connect on your computer.
  Computer 1: right-click on the desktop: note that the "next wallpaper" is MISSING from the context menu.
  Computer 1: If you go to the customization, the current theme will be unsaved theme that uses the last wallpaper, but don't use a Desktop Slideshow.
  This should not happen. He should go immediately to my previous theme, or even if I do not save the theme, it must return to the original values that was there before the use of remote desktop.
  Does anyone else know this? Is there a solution? Or am I doomed to have constantly changing my theme daily until Microsoft fixes this (If they decide to)?
  I use Windows 7 Professional build 7600 x 64 (MSDNAA image).

  You want to contribute your findings on the entry site.

  Microsoft.url entry: https://input.microsoft.com/scenarios/home.aspx

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Why do not the forward/back arrows work anymore - they are gray?

  When I start a new window or tab arrows forward/reverse do not work and are grey. I can get the previous sites by right click. I also have a left tab of orange "Firefox" in the upper menu. It seems that I have a Firefox window on top a regular window.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Why Windows Security Alerts tells me "your computer might be at risk", although Microsoft Security Essentials is installed, running, day and do what it was designed to do?

  Often after I reboot my system, a red shield with a white "x" appears in my notification area with a message of balloon saying "your computer may be at risk. The shield remains there until the next time that I reboot. This bug won't be fixed?

  This bug won't be fixed?

  Good question.
  Assuming that there is no malware and MSE is indeed enabled and up-to-date, you probably experience the effects of a condition of competition ',' Security Center where his thing before MSE does his. It is very common; I wouldn't worry on this subject (even if it's boring!).

• Why windows 7 won't burn a dvd Iso or even video file for me?

  I use the cyberlink dvd software that came with my windows 7 PC, but it won't burn a disc for me at all. Be it an ISO or video file is there anything I can download to address and solve this problem? If so, please link me to the top.

  I do not think that the program burn ISO (if you double-click on an ISO), thing of ISO of windows 7 should appear. Then you can burn it. I do not think that it burns DVD either t - it. He plays the

  Use DVD maker, which is part of Windows 7 (that's if it can load the video format you have)

• Why Windows 95 won't let Me download GarageBand?

  Not Now!!!!!!!!!!!!!!!!!!!!!!!!!!

  Hello

  Support for QL 95 took end. Please check the links to reference for the same thing.

  Obsolete products: http://support.Microsoft.com/GP/lifeobsoleteproducts

  Microsoft Support Lifecycle Policy FAQ : http://support.Microsoft.com/GP/lifepolicy

  Check with the manufacturer of the program for the same thing. http://www.Apple.com/support/GarageBand/

  Kind regards.

• Windows 7 won't let me access the files (my documents, my downloads), but the programs work very well!

  Currently, I am running windows 7 Ultimate on my desktop I built. My computer starts up fine, no problem when I connect and I can run all my programs like itunes, security suite norton, chrome, Picasa and Microsoft word work completely fine. There is no problem to save things on Word view my photos on Picasa (which is on the C drive) or by playing songs on itunes (which means that I can access my hard drive through programs), but when I try to open the downloads folder, it shows a popup that says: "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. "and does not open the file. The problem is that I AM the administrator account on the computer! However, when I open things in my libraries such as My Documents or my music, there just a blank page, saying that I have no files in this folder, but I have files in all of these files: photos, all my music itunes and documents.

  The interesting thing is that I can save documents to the word to My Documents and it will be displayed at the beginning, but when I close the My Documents window and reopen it, the file disappeared and the folder is 'empty' again.

  Currently. I have 2 hard drives connected, a seagate 1 TB and a supplement of 250 GB. Both of these drives appear in disk management, so that the computer knows and is able to see are how many gb on them. Apart from this recognition, when I open the start menu and press computer, it only shows my USB and my CD player, nor of my hard drives. I know that computers are connected correctly as they hum and dry as usual. I am very worried about what is, be it a virus, bad connection, settings that have been changed for any reason any.

  Please help me understand why Windows 7 won't let me access my files through programs, but not in Finder Windows, I have very important files on this computer that I can't lose!

  Windows 7 has a feature of self defense which is a pain.

  He doesn't like files from other computers,

  Right-click on the folder and select properties and see if there is a release button.

  Repeat for external drives.

• Windows 7 Pro (64 bit) has no install the AHCI Driver

  When I built my current computer system in May 2011, I have not encountered this problem with installing 64-bit Windows 7 Pro on the new 500 GB Western Digital HARD drive.  In fact, I installed Win7 three times (to wipe the drive with DBAN after the first and second installs) before I was satisfied with the third installation.

  Before the first installation, I configured the BIOS of card mother Gigabyte GA-890FXA-UD5 (Maj) SATA AHCI (with SATA 3.0) and copy the driver AHCI of CD Gigabyte on a SanDisk Cruzer USB (4 GB).  The GA-890FXA-UD5 (revision 2.1, version of the F6 BIOS) has an AMD chipset.

  During each installation, the Win7 Installer reported that she could not find a HARD drive and offered the option to load a driver.  I used this option, and the installation program displays a dialog box with whom I sailed the Cruzer to select AHCI driver.  Each time, Setup loaded the driver with success smoothly.  Of course, I still have the installation of Microsoft Windows 7 Pro DVD, purchased with a full license of the retail.

  Example: two years later, after that I started to meet various problems for which I could find no cause, no resolution, I suspected malware or corruption of the registry.  To make a long story short, eventually I decided to erase the internal HARD drive once again, after you save the data files on an external USB HDD.

  Win7 Setup now follows the same routine, of course.  Except that now, it will fail to load the driver AHCI of the SanDisk Cruzer (!).  I've also removed the Win7 installation DVD, loaded the CD Gigabyte, sailed to the driver and selected.  The Win7 Installer is always not load.  In addition, before you run the Win7 Installer for other attempts, I connected the USB HDD external and sailed to a copy archived AHCI driver on it, but Win7 Setup could not load.  I have made many and repeated attempts, with all the storage media at hand, that contains a copy of the driver AHCI files, but not joy.

  For what it's worth, I also ran the software on the repair disk I did shortly after installing Win7 Pro, and he couldn't load the driver AHCI of the SanDisk Cruzer with CD Gigabyte, respectively.

  Then I reconfigured the BIOS of the motherboard to SATA IDE (with SATA 3.0) and rebooted the system.  You might think that Win7 Setup would have a suitable driver for the AMD SATA IDE, since she has one for the reader to optical disc Samsung DVD-Writer (obviously), but it did not find a HARD drive.  Then I sailed in the appropriate driver AMD x 64 on the CD of Gigabyte IDE files, but Setup cannot load it, too.

  Question: why Windows 7 Pro 64-bit Setup does not install the driver AHCI, and what can I do about it?

  Hello

  Thanks for posting your query on the Microsoft Community.

  AHCI (Advanced Host controller) makes the NCQ (Native Command Files) with connection to warm or hot swapping through host controllers SATA Serial - ATA possible; Vista was the first to offer this feature. The problem with AHCI is that it must be enabled in BIOS before the installation of the OS. After installing the operating system will disable the PC. The reason why Windows disable the AHCI drivers not not needed during installation.

  I suggest you activate the AHCI after installing the operating system if you already enable AHCI in the BIOS, when you installed the operating system.

  Warning: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows

  1. in the window for the start menu search box, type regedit, click with the right button on the entry, click run as administrator, enter your credentials of the user for the UAC prompt, and then click Yes to Open regedit.
  2. in regedit, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services.
  3. in the left pane, click msahci, in the right pane, double-click Start to change.
  4. in the window that opens, change the value to 0 (zero), and then click on OK.
  5. in the left pane, click on iaStorV (if he), in the pane, double-click Start to change. Repeat step 4and continue with step 6 below.
  NOTE: From: Error Message Occurs after you change the mode of the boot drive SATA
  6. close the registry editor.
  7. now you will need to reboot the PC and go into the BIOS and enable the AHCI. When Windows starts, it will finish installing the AHCI drivers.
  8. you will need a final restart to complete the process once the drivers are installed.

  We hope that this information helps to let us know the State of the question, we will be happy to help you.

• Metadata transferring a cell phone on your desktop via a hard drive

  When I move a folder of images that have been keyworded on my laptop in Lightroom CC transfer the files, but the keywords do not appear in the keywords of the library section. However, I can open the images directly from the portable player in PS and see the keyword tab IPTC metadata / content IPTC. I checked the preferences of Lightroom are the same on the laptop and desktop as well as catalogue of parameters. Any thoughts?

  Thanks to anyone with a direction!

  On the desktop, how files are in Lightroom?

  You use file > export as Catalog on the laptop and file > import from another catalog when you are on the desktop? If not, why? This method retains all your work.

• Problem with windows search in Google Drive folder

  The windows folder search function does not work in my google reader account. It works in the directories, but not the google reader folder. I turned on indexing in the folder, and my user account has full access read/write/execution as well. Otherwise, the record of the google reader works fine.

  I am running Windows 8.1.

  Thank you

  Kurt

  Check this discussion here on the Google product Forums, it seems that there is a work around:

  https://productforums.Google.com/Forum/#! subject/reader/Uq5mGXUsbU0