Why windows doesn't allow me to record audio of the FL producer on hard drive?

Similar Questions

• the sound card for the Pavilion Slimline S3300T will allow me to record audio from the internet?

  I have a Pavilion Slimline S3300T. KC833AV prod # #ABA. OS vista Home Premium 32 bit.  The sound card will allow me to record audio directly from the internet?

  The sound card is not big thing to do with it, but there are third party software out there that will allow you to do.

  WaveTap is recommended by LifeHacker.

  Here is an article on their website explaining how to use it:

  WavTap Audio recordings of your computer by pressing a keyboard shortcut

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Explorer Windows in Windows 7, do a right-click in 1 of the 4 causes of hard drives Windows Explorer to stop

  Win 7, Windows Explorer, right click in the right hand only, Panel 1 of 4 hard drives causes Windows Explorer to stop.  The disk in question has been removed from my previous XP machine and inserted in it and a lot of files of data on it.  The other three disks were new and white discs.  All are formatted with NTFS and the disk in question worked well in my previous XP machine.  I have noticed no other problems with the drive.  Any suggestions as to what may cause this weird behavior and what I can do about it?  Thank you, gmhope

  This could be a problem caused by an incompatibility between the different version of your bios on your xp machine. BIOS not all do the same things in the same way, I was taught that a hard drive from another machine may not work in another with a different bios. The bios needs flashing on the screen when you start, bios award, a commune is an example. If you start them both and they are both the same bios is not the cause, if they're differentmaybe that's the problem . If you no longer have your xp machine then it's not a way to say average ither.

  But I suggest that you try to browse the disk using something else then windows Explorer (to avoid problem explorer).

  Open the run command on your Start menu and type cmd this will open a command prompt.

  Once opened type in the letter of the drive then an example of the colon (e :))

  Pressing on enter you will now be in this drive, and then type dir and then press ENTER, this will bring up a list of files. If these steps work for you and are able to see the content of the file on your drive is intact, but there is a problem in Explorer that prevents you to use it.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle on the left.

• Why my windows Vista Basic Home Edition would begin to make a backup of my hard drive without asking him?

  Original title: disk backup hard without my asking for it.

  Why my windows Vista Basic Home Edition would begin to make a backup of my hard drive without asking him. I backed up my files a couple of weeks and asked for another. More on this isn't a function that can be made on a calendar. You must specifically ask to be able to back up your files. Am I being hacked? If yes what should I do?

  Why my windows Vista Basic Home Edition would begin to make a backup of my hard drive without asking him. I backed up my files a couple of weeks and asked for another. More on this isn't a function that can be made on a calendar. You must specifically ask to be able to back up your files. Am I being hacked? If yes what should I do?

  Hey sharilanton

  Windows vista Basic can back up your files on a fixed schedule

  but vista Basic does not back up files of complete hard drive only

  read below how many times you want to creat a backup

  http://www.vista4beginners.com/how-to-backup-your-data

  Walter, the time zone traveller

• the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

  the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

  You n "t do it this way.

  You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

  If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  The process is simple:

  1. Install the software on your laptop for cloning
  2. RTFM (do not skip this step)
  3. Install the new drive in the external case
  4. Connect new player to the computer
  5. Clone original disc on new drive
  6. Stop
  7. Unplug the external computer case
  8. Exchange records (original for external disk) and the new laptop drive
  9. Reboot and enjoy your new drive.

  When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• Windows Media Player 11 continues to stream audio in the context of a video file even if I left the program.

  Windows Media Player 11 continues to stream audio in the context of a video file even if I left the program.  How to stop?

  Hello

  1 is there a problem with a particular video or videos?

  2 did you change on your computer before this problem?

  Follow the suggestions and see if it helps.

  Method 1

  a.Press CTRL + ALT + DELETE.

  b.Click start the Task Manager.

  c the process tab.

  d.Click the process of wmplayer.exe.

  e.Click end process and then click on complete the process.

  Method 2

  See the article and see if it helps.

  File Readme for Windows Media Player 11 for Windows XP

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

• Windows XP - a problem to transfer big file from laptop on an external hard drive

  I have a problem to transfer large files (mail.pst - zipped file - 5Gbyte) of the laptop (Dell Latitude D630) on an external hard drive (WD 320 G - FAT 32) where each time, I got the message "there is not enough free space on the disk" although I did successfully drive clean on both sides and there is enough space on both sides (not less than 25 GB).

  Also, I did a checkdisk command and he succeeded, and I use Windows XP

  I did several tests to resolve and in the end, I found that I convert the format of external hard drive FAT 32 to NTFS, and then I could successfully transfer the file.

  I used the following commands:

  (1) command line then chkdsk to repair bad sectors

  (2) convert the command line to change the format to FAt 32 to NTFS

  Note: For Windows xp, "convert" command will not delete the files from the hard drive

• I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  I have always used the windows logo + L key to lock my computer, I remove things from my hard drive and now it locks not for me... need your help :)

  Hi ddbowers01,

  The other shortcut keys work?

  Try pressing CTRL + ALT + DELETE and then try to lock the computer and check.

  Check the setting below:

  a. in the Control Panel, click user accounts.

  b. click on change the way users log on or off the power.

  c. Click to uncheck use the screen of welcome for a quick and easy connection.

  d. click OK.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog update saved on thehard d

  I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help

  He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer

• Why microsoft doesn't allow is no longer printing of PDF files via adobe

  Windows do not allow printing adobe PDF documents. message says windows must close this program. DEP or turn off to adobe makes no difference. has worked the last time used on 02/05/11

  It's not Windows, it's Adobe. I gave up years Adobe as it was nothing but headaches and not a day goes without a person posting in these forums with an Adobe problem.

  Try this light and fast PDF reader. It's very friendly Windows.

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

• Why windows doesn't let me access my user profile?

  When starting my computer I cannot access my user profile after entering my password it says "user profile service Service failed the log on" "User profile cannot be loaded" bold/underline is not typo, this is what appears in the message. Although I can always open a session, using another profile, I set as a system administrator in the profile that I can't access. Therefore, I am unable to change the settings of the user profile, or anything else that requires an administrator password. I hope someone out there can help with my frustration, I would be so grateful. Thank you in advance.

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why Firefox doesn't create so many temporary files in the cache? Once it filled all space (46GB)?

  Every now and then, Firefox will have created zillions of directories and the files cached in the directory for a Firefox profile. The directories are called 0 (zero) and F (using the hexagonal as numbers names, i.e.g), and within each of them will be more directories (with two names of hexadecimal digit). The last time this happened (2 weeks ago), these directories ate ALL my free space on the hard drive (about 46 GB of a value).

  Why does this happen? Can I stop it from happening? If so, how?

  Thank you.

  Yes, it should be easy reset.

  It can be put in

  • Options-> | Advanced | --> | Network | -> Web content caching
    Management of auto-cache to replace]
  • See #w cached web-contentweb-content-_cached

  Probably your auto adjustment has been replaced and the box should uncheck.

  I know that Firefox split cache up like this IIRC it allows faster cache and solves fragmentation issues.

  46GB which seems a surprising amount and cannot be good if he eats all the hard disk space. I also know that the file places.sqlite is a variable size, but it is based on the system in use.

  The regular HTTP cache is also defined without doubt intelligently, but can be replaced by the user
  This has some background info

  • https://developer.Mozilla.org/en-us/docs/HTTP_Caching_FAQ
  • http://KB.mozillazine.org/browser.cache.disk.capacity

  My own settings seen in everything: support are

  browser.cache.disk.capacity	358400
  browser.cache.disk.smart_size_cached_value	266240
  browser.cache.disk.smart_size.first_run	false
  

  My use of the cache is limited to about 350 MB