Why windows doesn't let me access my user profile?
When starting my computer I cannot access my user profile after entering my password it says "user profile service Service failed the log on" "User profile cannot be loaded" bold/underline is not typo, this is what appears in the message. Although I can always open a session, using another profile, I set as a system administrator in the profile that I can't access. Therefore, I am unable to change the settings of the user profile, or anything else that requires an administrator password. I hope someone out there can help with my frustration, I would be so grateful. Thank you in advance.
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.
Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html
How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html
BE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html
Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.html
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges? How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles? Please write to * address email is removed from the privacy * for your answer.
Steve
Can someone tell me why Windows Vista Premium does not create a user profile ADMINISTRATOR for me by default, as I am the main user and why he keeps me access to many programs and features in Windows, including installation and view and edit privileges? How can I set up my profile as ADMINISTRATOR rather than another user profile and get rid of all the other profiles? Please write toEmail removed privacy for your answer.
Steve
Let me soce entry details:
1. all computers need to have at least one administrator account. It will not work without it.
It does NOT, however, create a profile For YOU defaultAdmin. It belongs to the user or the owner to create and decide who is Admin, and who is a regular user.
2. even an admin account will not get to install and change the settings automatically. UAC (user account control) always appears to ask for confirmation of the task by clicking on continue, or by typing the admin password.
3 be the main user is not to be an administrator. It is up to the user/owner of the computer to be configured as such.
That said, now my question... How do you know that you're not an admin?t-4-2
-
ITunes doesn't let me access my library until I allowed my computer.
Original title: authorization of the computer
ITunes doesn't let me access my library until I allowed my computer.
This has already been done.
Any suggestions?
Hi Diane,
1. What is the accurate and complete error message you get?
2. don't you make changes to the computer before the show?I suggest you try the steps from the following link:
"Access denied" or other errors in the access to or work with files and folders in Windows
http://support.Microsoft.com/kb/2623670
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
When you try to access the user profile, get the error message "the service user profile Service has no logon. User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should). Anyway to fix the corrupted if user profile profile are available?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
Receive the error on the logging message indicating "problem accessing your user profile.
I get an error message from the log indicating that there 'a problem accessing your user profile '. About a week or two ago I called Microsoft and Security Support technician run my laptop in safe mode to remove a virus preventing me access to the internet. This problem has been resolved. I have not used my laptop again since then until today.
See if this helps:
·
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
Malware doesn't let me access the Safari preferences. Help!
This window pops up suddenly while I was with Safari:
Of "'http://macintosh-help.com ': "
Are you sure you want to leave this page?At risk security system *.
Critical security warning! Your Mac has detected an attack on this system, as your IP address seems to be accessible from two different places at the same time. A suspicious connection was attempting to access your Logins, Banking details & tracking of your Internet business.
Please contact Support Mac team immediately at 1-888-398-6257 (TOLL FREE) and provide the UR97L1DA2TA error code to analyze and solve the
Trying to close the window just opens a new window with the same or similar message. I suspect that it is malware taking advantage of a flaw in JAVA. All resolutions, I watched that require to open Safari preferences but this malware won't let me access the Security tab in the Preferences window. Help!
Choose force quit from the Apple menu, close Safari and then run it with the SHIFT key is pressed. If the message reappears, disconnect the computer from the Internet and close the tab Popup came.
(138731)
-
Windows doesn't let me download Yahoo messenger 10.0
Windows will not let me fully download Yahoo messenger 10.0, I get most of the download but twards the end it says download failed and when the 'troubleshoot' window, it doesn't give me any options that help.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
Kindly repost your question in the Forum programs Vista at the above address or contact Yahoo Support Forums.
See you soon. Mick Murphy - Microsoft partner
-
Why photoshop doesn't let me not renaming my layers
Does anyone know why Photoshop won't let me not renaming my layers?
I may be your solution - I just this exactly the problem and have run into a few times recently, seemingly random. The psd's happening was a floating window - when I moved it back in the dock he allowed me to rename the layer. I don't know if it's just my system, but its fixed it for me overall. I hope that this will work for all of you as well.
-
My password does not work. I get the message user profile service has no logon. Help please.
Hello
You can try the following.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore. Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration. When you are finished, Windows will restart as normal in order to check if you can now connect correctly.
Another option if the above does not help is as follows.
Shut down the laptop. Tap away at f8 that you start the laptop to enter the Windows Recovery Console. Use the arrow keys to select "Start using last good known Configuration" and press ENTER.
Kind regards
DP - K
-
Windows 8.1 did not create a user profile after creating a new user
I was deeply puzzled by this problem.
Just bought a MS Surface Pro 128 GB and upgraded to 8.1 Windows it works fine until I needed to create a new user. He is a user of child for my daughter with a local account only. After creating the new user account, I tried to logon. He complained "user profile Service does not have the sign in» Google it and found the solution to change the registry for the location of the profile displayed on many sites. So I launched regedit. But to my surprise, there is no entry for the new user to the profilelist title - there are only two entries: one for me (admin), and the other is for a user named "fwuser". So I couldn't use the method to rename the master for this problem.
Could someone give me a tip, which could cause this problem and how to fix it? Much appreciate it.
Hello
Have you tried this fix, please try it out and tell us:
Hope this helps, good luck :)
-
My windows live ID doesn't let me access my msn home page.
As long as I am connected to my Live ID, I can't go on my msn home page. I can't even go to the main msn homepage. As soon as I connect I can go to the msn homepage but not my home page. I asked others on my FaceBook page and there seems to be a problem of great nation. Help with this wouild be large. Thank you.
Hello
The question you have posted is associated with MSN, at the right place for you to contact would be MSN support.
I suggest you check with the MSN Help for more information.
-
Why Vista doesn't let me burn CD?
Okay, I'm just following the instructions to the letter, but when I click on "Burn to disc", Vista does not burn the files as promised. Instead, it's for me a window titled "Search Active legends" and nothing on that I click takes me to the combustion actually files. All stop there.
Why was a thing so simple on XP so impossible in Vista?
In fact, how can I burn a CD, or I have to go back to XP to do?Hi NewMichele,
Thanks for posting on the Microsoft Forums.
It seems that the application by name search Active legend blocking the Vista burning function, I suggest to remove this program and features, then try to burn
I hope this helps.
Best regards, Niranjan | Microsoft Answers Support Engineer -
Why Firefox doesn't let me go to Google when it is in the toolbar anyway?
I set the browser to open Google and as a first step, I have not had any problems, but now Firefox crashes me accessing the site, saying it is dangerous and will cause harm to my computer. I used this site for years and had no problem, then why is this happening, please. Chris keys
-
Why Firefox doesn't let me add an exception?
Firefox tells me that a site has an invalid security certificate, I know. It ask if I want to add an Exception and I click-to-add - on. It appears the Add Security Exception window and this window tells me that this site has a valid certificate and there is no need to add an exception; but I should add an exception and he won't do it for me. Why?
I work in a secure test lab and use Firefox to connect to our systems under test. Every time that we have change or add hardware to add exceptions to connect to a system. I did it for years with Firefox, but now Firefox 4 seems confused. We must now use AE, which I wouldn't have enough.
-
Why pictures don't let me access my photos?
A little gray box saying «Closing of the library...» "is displayed when I click on the app and won't let me go any further. I can't get rid of it unless I turned off the computer. But then when I try and access my photos after about 15 minutes, it still shows that the box and won't let me look at my pictures.
Try to repair your library - save your photo library and then press the command and option keys while launching Photos and repair library
LN
Maybe you are looking for
-
Reset to the factory settings without restoration. Why do I see previous contacts?
I have a new 5 iPhone. I added 6 contacts, 2 new downloaded applications. Saved on iCloud and iTunes. I had a very old Apple ID with an email address that I no longer use. I created a new Apple ID online by using this: Change your Apple - Apple Suppo
-
XP5.1 SP1a download "the server has not responded.
I had to reinstall XP 5.1 and I try to install SP1a. On the attempt to download - I get the message "the server has not responded. I have an internet connection - I asked the download from the MS. download site For some reason machines updates do
-
I use a HP deskyop computer. I also have Windows XP on it. I recently bought a pair of speakers and tried to use it on the computer, but it did not work. So I bought another game, something different, and again, it won't work. I even borrowed another
-
I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?
-
Hello Anyone who has ever managed to make it work? We have a problem with our Exchange Server and which enables MAPI clients to connect to if only CPP is allowed. This problem arises not only with Exchange RPC, but RPC of the MS in general. Access li