Wi - Fi and DVD storage + more Q!

Similar Questions

• where can you find cd and dvd with more drives than.7 GB?

  Where can you find DVD and CD discs with a capacity of more than 4.7 GB?

  Hello

  No CD is even close to this title, so it should be a DVD.

  Your drive should support disks you are using, so check with the system manufacturer (if the player comes with
  the system) or real player manufacturer.

  Understand the writable and rewritable DVD
  http://www.OSTA.org/technology/dvdqa/dvdqa6.htm

  HD DVD
  http://en.Wikipedia.org/wiki/HD_DVD

  Amazon, BestBut, Office Depot, Office Max and other great retailoes sell all types - chedk with BING or
  Google.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my cd/dvd is more listed on the computer and it will not play anything

  If I'm going to start the computer and then open cd/dvd is more listed also is absent from the menu equipment. I'm not a COMPUTER guru to take it easy with the answers. Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• DVD RW drive (e) does not recognize blank CD, music CDs and DVDs

  It has just started the other day, I first tried to download a cd purchased in my library.  Windows Media Player telling me I need to insert a disk.  Then I tried to use a DVD and a blank CD - R disc and the same result.  I tried to update my driver and using microsoft support "your CD or DVD drive cannot read or write media.  again, this does not solve my problem.  Looks like he's trying to read the disc, but never does.  Please give me some advice on how to solve this problem.  Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The reader of CD/DVD reading CD and DVD incerted incerted, no clue don't read do not?

  CD/DVD read/write driver reads CDs but is unable to read the DVDs. suggest, if there is no solution for the problem.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Unable to play music from CD and DVD

  IM can play any type of cd. when im put a disc in the drive of her does not give me an option to play. I was in contoll Panel and tried every option to set it as a default player, but nothing is yet same autoplay does'nt work. any advice would be appreciated.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• HDD and DVD problem SATA1 and SATA3

  Yesterday my computer started to have problems with Seagate on SATA3 (disc L) disc. Finally my L drive has not even appear under my computer. After that, I noticed that my DVD ROM is not appear as a drive letter more either. I have an E521.

  Boot Samsung on SATA disk 0.

  Burner DVD player SATA 2.

  DVD ROM was in SATA 1.

  Seagate disc L was on SATA 3.

  I have SATA 0 (boot disk) and 2 SATA DVD burner. Both known and always good work.

  If I move the burner DVD SATA 1 or SATA 3, it does not appear in my computer.

  If I add L or DVD-ROM SATA drive 2 neither one works there either.

  SATAs are turned on in the BIOS.

  It seems that the SATA-1 and SATA 3 work at all and when I try 2 devices which were attached to SATA 1 and SATA 3 on SATA2 they fail there also.

  Is is possible that the SATA-1 and SATA 3 are "toast" and "grilled" these 2 devices when they got out?

  The SATA-1 and SATA 3 attached somehow?

  After extensive troubleshooting, it seems that only SATA 0 and SATA2 actually work more and DVD ROM or Seagate Drive L will work on SATA 2 (a known port work.)

  If I just plug in and go to F2 under SATA options, each unit is actually recognized in the BIOS but never appears in my computer or in storage devices in administrative tools.

  Nothing has changed I was runnning like that for more than a year.

  Any help much appreciated.

  Thank you.

  Message edited by miller8b on 07/07/2008 12:10
  Message edited by miller8b on 07/07/2008 12:12
  Message edited by miller8b on 07/07/2008 22:36
  
  

• should I get the 32 gig and increase storage icloud or get the 128 gig?

  Should I get the 32 gig and increase storage icloud or get the 128 gig?

  iCloud can't complete really the iPads of storage on board. You can't have apps to run from iCloud, you can't the films played to iCloud, etc...

  If you plan to use more than the 32GBs go for bigger sizes.

• Problem with TSSTcorp TS-L632D TO04 CD/DVGW stoped burning CD and DVD

  Hello world! The problem is basically just, he doesn't want to write/burn any cd/dvd brand more. He works wonders for little over a year and recently developed this problem. I'm sure that's not media brands I've tried with several. The problem with Nero, Alcohol120%, MagicISO, PowerISO, Burn4Free, regardless of what I am trying to burn data, audio, regular programs or images. Note that I am able to write with alcohol with success but there is in fact nothing on the CD and Nero burns the data also but fails to verify after the fact and gives an error. Writing on DVD R/RW is completely failed, creating coasters. Also the Player opens without reason and when he wants. I have laptop Toshiba A200 - 1 MB under original Vista Home Premium. Here's an error report, hopefully it'll help. Thanks and any assistance is much appreciated!

  Windows Vista 6.0
  IA32
  WinAspi: -.

  NT-SPTI used
  Nero Version: 9.2.6.100
  Internal Version: 9, 2, 6, 100
  (Nero Express)
  Recorder: Version: TO04 - HA 1 YOUR 0 - 9.2.6.100
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: Via inquiry data
  CD-ROM: Version: TO04 - HA 1 YOUR 0 - 9.2.6.100
  Adapter driver: HA 1

  = Scsi-device-map =.

  = CDRom-Device-map =.
  TSSTcorp CD/DVGW TS-L632D E: CdRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  BUFE: 0
  Physical memory: 2037 MB (2086276 KB)
  Free physical memory: 864 MB (885052kB)
  Memory used: 57%
  QUERIES PFiles: 0x0
  Global Bus type: default (0)
  Control supported media: disabled (0)

  13.10.2009
  CD-ROM (ISO)
  02:27 A. Â? ? Â? #1 text 0 file SCSIPTICommands.cpp, line 452
  LockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  02:27 A. Â? ? Â? #2 text 0 file Isodoc.cpp, line 6940
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: TRUE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  02:27 A. Â? ? Â? #3 text 0 file Burncd.cpp, line 3257
  TSSTcorp TS-L632D CD/DVGW
  Super link activated

  02:27 A. Â? ? Â? #4 ISO9660GEN-11 file Geniso.cpp, line 3349
  First address writeable = 0 (0x00000000)

  02:27 A. Â? ? Â? #5 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 0. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #6 text 0 file Burncd.cpp, line 3587
  Turn on Track-At-Once, using CD-R/RW media

  02:27 A. Â? ? Â? #7 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #8 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #9 text 0 File DlgWaitCD.cpp, line 294
  Media in the drive type: unknown
  Write speed more up/down CLV: 3 x / 1219560 x
  Recorder min/max supported write speed: 4 x / 9226724 x

  02:27 A. Â? ? Â? #10 text 0 File DlgWaitCD.cpp, line 313
  Last possible write address on media: 359846
  Last address to be written: 2884

  02:27 A. Â? ? Â? #11 text 0 File DlgWaitCD.cpp, line 325
  Write in overburning mode: No. (enabled: CD)

  02:27 A. Â? ? Â? #12 text 0 File DlgWaitCD.cpp, line 2882
  Recorder: TSSTcorp TS-L632D CD/DVGW;
  Code CD - RW: 00 97 10 00; CD manufacturer unknown
  ATIP data:
  Special Info [hex] 1: D1 00 C6, 2: 61 a 0, 00 (LI 97:10.00), 3: 4F 3 b 4 a (LO 79:59.74)
  Additional info [hex] 01:02 4A B0, 2:5 C6 26, 03:00 80 80 (invalid)

  02:27 A. Â? ? Â? #13 text 0 File DlgWaitCD.cpp, line 500
  > Protocol of DlgWaitCD activities:
  =========================================

  02:27 A. Â? ? Â? #14 text 0 file ThreadedTransferInterface.cpp, line 744
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2885 (2885) original disc POS = 2885 # / 0:38.35
  relocatable, pos to drive for the cache-write implementation not required / required
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2883 blocks [E: TSSTcorp CD/DVGW TS-L632D]
  --------------------------------------------------------------

  02:27 A. Â? ? Â? #15 text 0 file ThreadedTransferInterface.cpp, line 946
  Prepare [E: TSSTcorp CD/DVGW TS-L632D] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Titles 1 to 1: Idx 0 Idx 1 next Trk
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 6215680, ISRC ""
  Introduction DAO:
  ===========
  ___Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | ___Size_ | ___NWA_ _ | _RecDep___
  -150 | Lead-in | 0 | 0x41. 0 | 0 | 0x00
  -150 | 1. 0 | 0x41. 0 | 0 | 0x00
  0 | 1. 1. 0x41. 2885 | 0 | 0x00
  2885 | Lead-out | 1. 0x41. 0 | 0 | 0x00

  02:27 A. Â? ? Â? #16 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #17 text 0 file SCSIPTICommands.cpp, line 242
  SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

  02:27 A. Â? ? Â? #18 text 0 file Burncd.cpp, line 4320
  Caching options: cache CDRom or network-Yes, small files-no)<>

  02:27 A. Â? ? Â? #19 phase 24 file dlgbrnst.cpp, line 1767
  Caching of files started

  02:27 A. Â? ? Â? #20 text 0 file Burncd.cpp, line 4442
  Cache writing successful.

  02:27 A. Â? ? Â? #21 phase 25 file dlgbrnst.cpp, line 1767
  Caching of files completed

  02:27 A. Â? ? Â? #22 phase 28 file dlgbrnst.cpp, line 1767
  Speed measurement started

  02:27 A. Â? ? Â? #23 text 0 file ThreadedTransferInterface.cpp, line 2676
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  02:27 A. Â? ? Â? #24 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 590400

  02:27 A. Â? ? Â? #25 phase 29 file dlgbrnst.cpp, line 1716
  Speed measurement completed: 307.7 x (46? Â? ? Â * 160 KB/s)

  02:27 A. Â? ? Â? #26 phase 36 file dlgbrnst.cpp, line 1767
  Burn process started at 4 x (600 KB/s)

  02:27 A. Â? ? Â? #27 text 0 file ThreadedTransferInterface.cpp, line 2676
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  02:27 A. Â? ? Â? #28 text 0 file MMC.cpp, line 21875
  Set BUFE: Super link-> ON

  02:27 A. Â? ? Â? #29 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 83836800

  02:27 A. Â? ? Â? #30 text 0 file MMC.cpp, line 17311
  Start narrow-gauge #2

  02:28 A. Â? ? Â? #31 text 0 file DVDPlusDualLayer.cpp, line 1424
  SetDriveCaps: Set LAST LBA of layer 1 to 0

  02:28 A. Â? ? Â? #32 phase 37 file dlgbrnst.cpp, line 1767
  Burn process completed successfully at 4 x (600 KB/s)

  02:28 A. Â? ? Â? #33 phase 78 file dlgbrnst.cpp, line 1767
  Data verification started

  02:28 A. Â? ? Â? #34 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:28 A. Â? ? Â? #35 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 590400

  02:28 A. Â? ? Â? #36 SPTI-1064 file SCSIPassThrough.cpp, line 215
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1064)
  CDB data: 0 x 28 00 00 00 00 00 00 00 01 00 00 00
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0x21
  Meaning of Qual: 0x00
  Sense area: 0 x 70 00 05 00 00 00 00 0 to 00 00 00 00 21
  Buffer x0a5a6500: Len x 800

  .................................................. .................................................. ............
  .................................................. .................................................. ............

  02:28 A. Â? ? Â? #279 SectorVerify 20 file Cdrdrv.cpp, line 11185
  Sector 0 to 1055 read errors

  02:28 A. Â? ? Â? #280 CDR-1222 file Writer.cpp, line 203
  Checking abandoned, too many errors
  E: TSSTcorp TS-L632D CD/DVGW

  02:28 A. Â? ? Â? #281 phase 81 file dlgbrnst.cpp, line 1767
  Data verification failed

  02:28 A. Â? ? Â? #282 text 0 file SCSIPTICommands.cpp, line 289
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  02:28 A. Â? ? Â? #283 text 0 file Cdrdrv.cpp, line 11243
  DriveLocker: UnLockVolume completed

  02:28 A. Â? ? Â? #284 text 0 file SCSIPTICommands.cpp, line 452
  UnLockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

  Post edited by: velkoto

  Post edited by: velkoto

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

  Also remove the dust on the lens with a clean Microfiber cloth.

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• Mac Pro, Flash Storage, Dropbox, and external storage Solutions

  I am considering a Mac Pro to a computer in the enterprise. I hope someone can give an overview and experience with the dilemma of using a computer with a small amount of storage on board, dropbox and external storage devices.

  Background:

  Mac Pro storage on board - The Mac Pro has limited onboard storage. It comes with a 256 k flash memory and is apparently expandable to 512 or 1 TB. But, I can not even know where to buy the storage upgrade. For some reason, it seems even to be available for purchase on Apple's site. I can't understand how much it costs or where to buy it. I found a link showing how to install it, but that's all.

  Dropbox - Dropbox is an important part of the company, or at least my business. The tricky thing is that Dropbox doesn't seem to work very well if this does not work on an operating system main hard drive. I tried once on a Mac Mini Server, and it does not work well. I read on the Dropbox site that it doesn't work so well. The small amount of storage on board available for the Mac Pro means that it is necessary to use an external drive, which is fine with me, with the exception of the question of Dropbox. Is anyone here from an experience with this problem.

  External storage - the question here is as stated above. How to get an external drive on a Mac Pro, the operating system is not installed on, to work properly. I know that most people could read this and suggest to go to the website of Dropbox support for more information. I was able to do that and have nothing. Looking for Mac people who could potentially experience.

  In short, how the hell you upgrade Mac Pro flash storage... where do you get, and how much it costs?  And second, anyone experience using Dropbox on a Mac Pro, where the Dropbox folder is not located on the operating system drive.

  Thanks for any help that can be provided.

  -Apple does not sell to replace internal storage.

  -You can often find storage on eBay and other places. However, isn't that all in storage for some MacBook Pro model will work in the Mac Pro is much slower. One way to tell is that the MacBook you do not have a heatsink on them while the Mac Pro.

  -You can buy external storage Thunderbolt. To access only a disc both an external case USB 3/disc is about as fast as Thunderbolt. Can get pregnant using the portable 2 1/2 standard SSD

  -I did not all the posts here for the use of DB on an external drive.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista Ultimate on HP DC 7900 Mini lathe, always charge readers of cd rom and dvd rom.

  I installed Vista Ultimate on a HP DC7900 minitower. Clean install on new hard drive. Have no cd and dvd rom installed on the same cable (ide).

  It is on a small network of three computers, 1. XP 2. Vista Ultimate 3. Windows 7 Professional 4. HP Laserjet 4000N 5. Router DLink 825.

  No other computers have this problem.

  Since the first day, when the computer should be slowed down and in fact is in mode 'sleep', the tasks of the computer (seeks?) first the dvd rom and cd rom drives. I can only describe as a ratcheting noise. It lasts only a few seconds, but takes it approximately every 20 minutes.

  I installed all the updates for Vista on a regular basis, of which none have eliminated the problem. He did it since the day that I install.

  The only way to stop the problem is to stop the computer everyday and restart the next day. I can't let it run all night. When I run all day, if I walk more than half an hour, he start "multitasking" records rom again.

  Anyone has this problem next to me?

  Thanks to all those who may have the solution.

  I could go to Windows 7 on this computer and probably should, but do not have eight hours to spend in the upgrade right now.

  Hello

  I suggest you to check the link below to perform hardware diagnostics:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00849402&LC=en&cc=UK&DLC=en

• I tried to burn some pictures with music on a DVD using Windows DVD maker, but others cannot open or run the disc. I tried to use DVD-R and DVD + R, but nothing works. Any suggestions?

  I have created a slideshow with background music using Windows DVD maker on a DVD-R and DVD + R and others cannot open or run the disc. I can't run into a DVD player, but my computer it plays very well. Any suggestions?

  Lol it won't play in my DVD player either. Just the computer.

  =====================================
  This could be a hardware problem with your DVD writer
  but here's something you can try.

  Create your slideshow (photos and music) in the film
  Creator of... and then publish the file to a folder on your hard drive
  walk in the .wmv format.

  Windows Vista
  Getting started
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Then try to use the following free software to burn your DVD:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  Good luck.

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  John Inzer - MS - MVP - digital media experience

• Windows media player cannot read CDs and DVDs

  MS supports says my Player DVD is dead and needs a new drive. So, I just install a new ROM DVD and still have the same problem - cannot read CDs and DVDs.

  When I play the CD, I always get the error meessage--(lecteur Windows media a rencontré une erreur lors de la lecture de lecteur de CD en mode numérique...). 'Digital' is selected under the tool-> properties-> device.

  When I play DVD, it is frozen my laptop or keep spinning and froze the Windows Explorer and the reader.

  I was able to read DVDs and CDs once after a few restart. During playback of CD the WMP abruptly stopped with error message and since that time cannot play CD DVD & more.

  So far, I did a few fixs that I found online and nothing wroks:

  * No upperfilter or UpperFilter registry

  * Uninstall and let the laptop automatically reinstall the driver

  * Ms. Fix it gives different results every time I run the fix-(1) detects no problem and therefore no patches have been applied (2) the main media in the CD drive is not readable (same CD has played correctly when using external USB DVD rom)

  Can someone help and let me know what that could be the problem and how to fix it! Thank you!

  Hi Amy,

  You can read the following article to clear the Windows Media Player database and check if it helps.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  If you have any third-party media player installed on the system, then check if the DVD player works with it.