The reader of CD/DVD reading CD and DVD incerted incerted, no clue don't read do not?
CD/DVD read/write driver reads CDs but is unable to read the DVDs. suggest, if there is no solution for the problem.
Hello
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.
Several good info here:
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014
===========================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.
Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml
Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.
Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.
Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.
Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.
Forums - a lot of expert real help
http://Club.myce.com/
CD/DVD units
http://www.myce.com/storage/
Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.
DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
Original title: part 2: GOT PC SLEDGE HAMMER, FIXIT TOOL? When I ran the SAS the he finds several pieces of Adware and my browser had been hijacking?
Nest of Adware found on my pc Windows XP home service Pack 3 when I ran SuperAntispyware remover, free version! After I already had Defender windows R, avg, free avast and avira? Not one of the most famous, virus-scanning Spyware on the market has found a thing, SuperAntiSpyware found a bunch, BROWSER My Plus had been HIJACKING? Now I need more help CLEANING UP THE MESS LEFT ME ILS? THINGS ARE MESS of BAD? MY Internet explore page to the farm, like flippin a switch? My pc can not find programs such as exe, cmd, s and dll, s, s and if I can get to a site down load a program fix, it does not download to the right, so it does not work? IM about to go out the SLEDGE HAMMER PC DIFFICULTY IT 4 GOOD KEY?
Hello
· What is the version of internet explorer, you have installed?
1. check if the error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427
2 run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747
Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)
See: difficulty to your web browser hijacked: http://www.microsoft.com/security/pc-security/browser-hijacking.aspx
-
I downloaded Acrobat reader on my iPhone and IPAD. When I go to open an attachment, acrobat is not an option. How can I solve this problem?
Hello
What is the application you use to read email? It's Apple Mail (the default mail on iPhone and iPad app)?
Please take a look at the section "Open email" the following documents of the FAQ.
How to open PDF documents in Adobe Acrobat DC for iOS (iPad version)
How to open PDF documents in Adobe Acrobat DC for iOS (iPhone version)
If Acrobat Reader for iOS is installed properly on your iPhone and iPad, Acrobat Reader should appear as one of the options for the iOS 'Open In' feature.
Please let us know if you have any other questions.
-
Satellite P25 - DVD-R/RW does not work, the reader does not see the drive
I have a P25-S609 player gave me problems since it was a new computer. He totally went out then, I replaced the Multi-lecteur with a new FW UJ - 811 t and the thing still does not.
DVD-RAM fuction is has never worked. I tried different disc and now the new drive.I am really disgusted.
Help!Hello buddy
> the player gave me problems since it was a new computer
Can you please tell me how old is this model of laptop? It takes about 5 years now. And after a long period of time, you come to the conclusion to exchange the optical disk drive. Strange!Anyway have you checked the compatibility with the FW UJ-811 t? the assignment of PIN on all optical disk drives is not the same.
In any case for DVD - RAM features, you must install driver DVD-RAM. I ve used a long time ago and DVD-RAM P20 worked very well.
I put t know if the same is available for the models of laptop computers in the United States but check it please United States support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp
Good luck!
-
Successful installation of the reader is not successful
Yesterday, I got Reader X on my PC and it worked fine. When I tried to upgrade to reader XI, I downloaded it on my computer, and at the end I was told that the installation was successful, but the XI player don't show up anywhere. This has happened 3 times. So, I removed the drive X and tried to redownload the XI player.
I downloaded Adobe Reader from the Internet, backup and run the exe file. In the end, I was told that the installation was successful. However, the drive is not on my computer. There is no drive on my desktop icon. When I try to open a PDF document, drive is not listed as an option to open the document.
Adobe Reader isn't in my downloads folder, even if I recorded it (when I downloaded it) and headed the exe file.
I have a Compaq Windows XP desktop PC.
How to properly install Reader on my PC?
Try if you have better luck with the MSI installer: http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi
-
The reading is not clear - HELP - the program monitor
The video looks fine until I hit the game - video becomes a little Blur/Blur... not much but is certainly not clear (Normal). any thoughts?
Set your high playback quality.
-
I want to install Adobe Photoshop elements 13. I find my serial number in my old account and when I entered, I received an error message that the serial number was not valid. I can't locate my serial number and can't complete my sign in.
Serial number and activation support chat (non - CC) can help
http://helpx.Adobe.com/x-productkb/global/Service1.html
or
Select a topic and then I STILL NEED HELP to activate the Photoshop elements online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements
-
I love Mahjong titans, which came with my Dell computer. Why can't always win? The site says it's a game ahead. It didn't start that way. How to return to the beginner game and win sometimes? Why I want to play a game that it is impossible to win. I never win now.
Hello
1. you play Mahjong Titans online?While you are playing the computer, there no difficulty levels of the game, but different designs that you can choose from.
Here is the list of page layouts1 turtle,2 dragon3 cat4. the fortress5 crab6 spiderHow to play Mahjong Titans
1. open the Games folder: click Start, click programs principally made, click on games and click Games Explorer.
2. double-click on Mahjong Titans. (If you don't have a saved game, Mahjong Titans starts a new game. If you have a saved game, you can continue your previous game).
3. Select the tile layout: Turtle, Dragon, cat, fortress, crab, or spider.
4. click on the first tile that you want to remove.
5. click on the matching tile and two tiles will disappear. -
DVD/cd burner no longer works. Instlled SP3, no computer behaves as it is not yet connected. No reader, its firmware. No filter I know cuttin git. Not a problem of drive letter, carries the reader will not be open yet.
Hello Justuslonginus,
Thank you for your message. What is the brand of your computer? It could be that your computer manufacturer has a required update before installing SP3. You should check with them before moving to the next steps. After checking with you computer manufacturer, try to run the new hardware wizard to scan. The instructions are below:Click "Start" > click on "Control Panel" > double-click "Add Hardware".Answer that the device is already connected and allow the system to scan.If your system has not yet found your drive. Then we can remove SP3 to see if it was the culprit. Click HERE for instructions to remove the SP3.Please let us know if it did or did not help to resolve this problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Solutions to the problem of CD/DVD drive cannot read DVD discs
This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.
Solution1. Clean the DVD disc
If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.
After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.
Option2. Check the disc to see if it has been damaged
Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.
Solution3. Clean or repair the CD/DVD drive
When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.
Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.
Post edited by: Newhampshireguy
Thanks for sharing your experience with us!
I think your assignment might be useful to others here in the community. -
CD/DVD drive read only not the discs in Vista
My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
vISTA can NOT DETECT THE READER of CD/DVD,
WINDOWS VISTA cannot DETECT THE CD PLAYER, ONCE CHECK IN DEVICE MANAGER, the PROPERTIES THE SHOWS "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». How can I get the DIFFICULTY of THIS PROBLEM?
Thank you
Hello
Code 39 means that the driver is corrupted or missing.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
CD rom read as not all w 7 disk drivers are updated and without errors
Update vista to 7 w when the computer starts there is no icons or taskbar and cd rom does not read any disk says it all works fine without error
Hello
References to Vista also apply to Windows 7.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
When I put a disc in my drive to download the reader program does not recognize it.
D: drive does not
for some reason when I put a disc in my drive to download a program, the reader does not recognize, I go to my computer and the folder is empty, it seems he does not see the drive, but really don't know if my disc is bad because I can put a movie into the drive, and the film plays , its been like this for a few months and I would like to avoid a system restore since then I downloaded a few programs on the web, so I was wondering if it could be a setting or something.for some reason when I put a disc in my drive to download a program, the reader does not recognize, I go to my computer and the folder is empty, it seems he does not see the drive, but really don't know if my disc is bad because I can put a movie into the drive, and the film plays , its been like this for a few months and I would like to avoid a system restore since then I downloaded a few programs on the web, so I was wondering if it could be a setting or something.
Wow - that was a whole sentence, huh?
Are the applications that you are trying to install from the CD or DVD drive? If they are all CD, a CD of MUSIC playing when inserted? If this is not the case - it could be your laser CD came out, but your DVD laser works very well.
-
DVD RW drive (e :)) don't read do not all disks)
I have a Dell Studio Windows Vista. The DVD RW drive (e :)) does not.) Regardless of the type of disc that I put in, my DVD player does not recognize. When I go to 'My Computer' to open the disc manually, a message appears telling me to insert a disc, even if it is already inside. In addition, when this message appears, it ejects the disc I have here. I did everything. My computer is up to date. I went to the only Device Manager update my CD/DVD drive and it is already up to date. I don't know what to do from here.
Hello
Check with Dell Support, their drivers and documentation online and ask in their forums known issues.
Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/
=========You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly. Since it accepts no disc do not forget to remove ALL the power and control the
cable connections - remove and replace (at both ends where possible).Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014===========================================
This troubleshooting could not help if there is alignment and/or wear issues however it
a shot.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
I use RemoterVNC on my iPhone to log remotely on my Mac at home so the children can use the computer without my go physically to the computer. (I admit, I am a bit lazy like that). However, lately when I launch RemoterVNC (on my iPhone), do the busin
-
Windows Vista login password lost - how to get around?
Hello I managed to forget my login password for my account, so I can't bypass the connection now. Is it possible so I can restore my password? My account has administrator rights.
-
Audio CD F20-137 and car stereo
Created audio CD through media player will play on my house, Hi Fi, but not on my car CD player. However the CD created by a friend on their desktop will play on it. Any suggestions?
-
Toshiba PX1266E - 1 25 external hard drive (250 GB)
I had a glance at the map, I don't see anyone with a similar problem, so I am posting this in the hope that someone can help me. I currently have a HDD external Toshiba PX1266E - 1 25 (250 GB) that is causing me problems. I have two laptops that I us
-
Writing data in the text file or excel spreadsheet
Hello I have a silly question to ask questions about the writing of data in a text file or a spreadsheet. I have an example that simulates a sine-swept DAQmx. The output it provides is the (amplitude and phase) frequency response function that is plo