width of 100% when you use the menu widget?

Similar Questions

• How to change the menu colors when you use the menu widget?

  So I inserted a menu using the menu widget, but how can I change the background colors? at this time is grey

  To change the background color of the item of a menu, simply select the Menu item (by clicking on the Menu twice) and change the color using the options of filling for the different States. If you change selection set in the options list, the color would be changed for all menu items.

  Thank you

  Vinayak

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• How to fix the "stutter" when you use the YouTube widget

  I use the YouTube widget that comes with 8 Captivate, and it works almost perfectly.  The only problem is it is hard noticeable half a second to load and e-Learning "flashes".  I tried to put a screen behind the YouTube thumbnail widget, but that seems to flicker as well...

  Does anyone have experience with this problem?

  Thank you!!

  Try it on a server and see if it still does the same thing. I only worry about this if it does not work in the environment that the course will finally reach.

• When you use the menu bar above, on the homepage, + have tabs on top, BIG WASTE of 1 "BLANK SPACE ON TOP =

  I installed 4 Fox under Windows (7), on a PC. My top toolbar goes like this. Upper line: file, edit, etc.. Second line: open tabs. Third line: normal search and address bar. Fourth line: favorite icons. Fifth line: Google toolbar.

       I can see my DESKTOP, big waste of space, above these 5 lines, which DOES NOT utilize the FULL screen for display information.
  

  Maybe allowed to be located in the menu bar or the toolbar, so everything will fill the space lost on top.

  Thank you

  Use Firefox Button instead of the menu bar.

  Go to the Menu view > toolbars > uncheck menu bar option.

  You will see orange button in the upper left firefox with tabs moving upward.

• Start menu disappears when you use the menu

  When I click on the Start button on the start menu, the menu will open, but after a few seconds it just closes. Account other start menus work perfectly well.

  Hi Danny81212,

  ·         Have you made changes on the computer before this problem?

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

  Method 2: It seems to be corrupted user profile. Follow the steps in the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Can I use points rather than inches * definitely * when you use the menu box "cloak"?

  Can I use points rather than inches when the dressing specification in menu box "cloak"? In other words, can I use points and there is no change to inches as soon as I'm done?

  Thanks for responding!

  You can always insert any available unit, just add the unit if it is not the norm. For example write 5pt if you wand 5pt, even if the field displays mm or inches.

  Changing permanently would be possible through preferences, but not only for the single string.

• Can I turn off the setting that displays the height and width in a small black box when you use the marquee selection tool?

  In Photoshop CC on a mac...

  When you use the marquee selection tool, a little black box appears next to the cursor and displays in real time, the height and the width of the selection.  The same annoying box also appears when you drag an item with the tool move, displaying the numeric position of the cursor.  Is there anyway to disable the display of this little black box?  It makes me crazy.

  In cmd/ctrl-k preferences click "Interface". At the bottom of the interface user is a drop down menu to see the transformation. The value as 'never '.

  

• Just changed Safari on my imac. When you use find menu safari gave me the opportunity to "find in this page" which was an incredible aid during a search. Is it possible to have this feature using firefox?

  Just changed Safari on my imac. When you use the search menu in safari, I had the opportunity to "find in this page" which has been an incredible help while doing research and looking for specific words/phrases. Is it possible to have this feature using firefox?

  I think that Safari has the same keyboard shortcut in Firefox 'cmd + F' on a Mac or a 'Ctrl + F' on Windows.

  Look in the lower left corner to find. There are more likely to be next and previous differences in keyboard shortcuts, but continuing in the search bar at the bottom no matter what browser you use. It is an 'X' to reject the search bar. In Windows, the "Esc" key will reject the bar if you are in the search text entry box.

  Keyboard shortcuts:

  • Keyboard shortcuts | How | Help Firefox, Mozilla very limited number of shortcuts but will show correctly for your system
  • Firefox and other shortcuts of the browser (comparison chart), more substantial, but is oriented Windows users with a few guidelines for Mac and Linux users.

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• How can I customize the toolbar when you use the browser of the attribute

  In CVI 2012, changes in the toolbar depending on the environment, for example, it is different to the source window and the user interface editor. The toolbar can be customized using the Options menu / toolbar...

  Unfortunately, when you use the browser of the attribute of the user interface editor, another toolbar is displayed, i.e. not the UI Editor toolbar... I would have assumed that the browser of the attribute belongs to the user interface editor, obviously this isn't... So, how can I customize the toolbar when you use the browser of the attribute?

  
  

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• How to enter the character ü when you use the pinyin keyboard?

  How can I enter the character u when you use the pinyin-simplified keyboard, for example, for the opening of the syllable nu with your 3.

  The keyboard pinyin-simplified is for entering the characters han, not latin.  If you want to type the latin pinyin, you must use the extended ABC keyboard configuration.  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html

• Is cell required when you use the map applications of conduct?

  Is cell required when you use the map applications of conduct?

  Yes. GPS does not work with a Wi - Fi connection.