Satellite T - mouse do not work

I recently installed Norton Security 2011 and updates for Windows 7, and then the mouse doesn't work anymore. I downloaded the drivers and the re'installed, but still does not work.

Any clue?

Hey

Probably just the touchpad is disabled try pressing the FN + F9 key combination to re-enable the touchpad.
It works when you connect an external mouse?

In addition, certain information on your laptop model and the version of Windows would be useful

Tags: Toshiba

Similar Questions

  • Satellite C855 - mouse does not work - keyboard freezes.

    Hello

    I tried several times to call on the long waiting support phone number and no answer (queued for centuries)

    I had a problem since 1 week with my laptop Toshiba as below

    The trackpad (mouse) does not work despite to remove the battery, pressing f2 and FN then f9 and f10 as mentioned in various forums

    Also, the keyboard is blocked completely several times - I checking also tried other things like BIOS - active trackpad

    And finally we have also made the SYSTEM RESTORE to an earlier date when everything was going well on laptop

    Serial number: 2D138575R
    Model: Toshiba Satellite 2F0 C855

    Help, please!

    There are a few options that you could check.
    *-> BIOS update.*
    In the case where there is a new version of the BIOS of your laptop, perform the update on your device.

    *-> System restore / restore *.
    You wrote above you already set the laptop to a previous data, but I'm don't think it is good enough. It s advisable to get the laptop back to factory settings.
    How?
    Using the previous created recovery (disk or memory stick flash) media or using the option to drive HARD recovery (power of the device, press F12 and select HDD recovery)

    Of course the HARD drive running recovery would lead to the loss of data, back up crucial data.

  • The mouse does not work on my new Satellite L750/L755

    Hello world

    I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
    I tried the following options:
    I updated the driver - I changed the operating system

    but nothing, still the same problem. Next laptop will be a Mac for sure.

    I look forward to hear from you

    Daniele

    Hello Daniele

    It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

    Check it please all the properties of the mouse.

  • Satellite A350 - Touchpad does not work, but an external mouse works

    Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

    I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

    What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

    Thank you, and sorry for my bad English. :-(

    Hello!

    The touchpad does appear in Device Manager or you have here yellow exclamation points?

    Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
    Did you check that?

    In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • Satellite C660 - click of the mouse does not work

    Hello

    I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

    I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

    Any ideas please?

    Hello

    You have the same problems with a mouse external or just the touchpad?

    If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

    Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • New mini optical mouse does not work

    Hi all:

    I used a mini mouse optical for a few years now without a single problem. I just plugged into the USB port, and that's all. Yesterday it died on me, so I bought a new.

    The mouse does not work and the cursor stays frozen at least that I move it using the touchpad on the laptop.

    OS is Vista
    Satellite P100 series

    More information:

    -the little wheel on the mouse will allow me to scroll the page to the bottom, but it's just what works
    -the drivers are all up to date
    -restore the computer to an earlier date
    -run a full virus/malware scan, nothing came
    -USB are good; I tried all ports, including the ports where something else that works has been connected
    -After I restore and connect my mouse in I saw the computer install the latest drivers

    The only thing I can think is that the new mouse is defective but I doubt that. However, it is possible I suppose.

    Can anyone else think of any other possible explanation and how I can solve this problem. Could something changed in the BIOS? Is there a setting that has changed I have to look?

    Thanks for sharing this with us!

  • Integrated on my Satellite T130 webcam does not work

    Hi all

    the built-in on my Satellite T130 webcam does not work.

    I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

    Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

    I'd appreciate any help, thank you.

    Best regards Florian

    > a USB not detected if

    Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

    It looks like a webcam driver is not installed correctly.
    Try the webcam driver released for the satellite t230 or other series of satellites.
    Versions are newer

    Also recommend that you check the BIOS settings.
    In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

  • HP laptop: wireless mouse does not work

    After mobile update on oct 6th wireless mouse is not working.when I am looking for in the receiver 2.4 g device is here.

    I did a hard reset but it does not. The mouse is iball freego 2.4 g wireless optical mouse

    and even when I went to download a software to reinforce the msg me: "We have couldn't retrieve the list of drivers for your product." Help out me

    dhruvil28

    Hello;

    Let me welcome you on the HP forums!

    Sorry, but if your talk to get the mouse drivers from HP, what's not at work, such as HP does not include drivers for the hardware not HP.

    Have you tried to download the drivers from the manufacturer of the mouse?

    You must go to the settings, update & Security-> Windows Update.

    Then, choose Advanced-> history to see when the updates have been applied last. If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem. Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.

    And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

    If the appropriate device adapter is no longer present in the Device Manager, what MIGHT work is something known as a repair installation. It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.

    To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10

    Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

    Good luck

  • 3480CT Accupoint mouse does not work

    I just bought this laptop for use at home as a small portable computer which can be connected to our wireless network and can be used anywhere around the House easily.

    In any case, I have and the accupoint mouse does not work, any more than the mouse buttons. The person I bought said he thinks its because the correct driver is not installed.

    I would really appreciate if anyone can help.

    Thanks Mark

    Hi Mark,

    I see that the Web Site of Toshiba UK does not list the reader pionting device for your laptop model. So I assume that it should use the standard version of Windows XP.

    Check in for your pointing device Device Manager to see if it is showing up with errors. Also, you should be able to run a troubleshooter for it and perhaps also a calibration tool. (You may need to move around with the arrow keys or tab).

    If all else fails, you can try to recover your system with the recovery CD and that the pointer is still not working properly, then this would indicate a hardware fault.

    Kind regards

  • Tecra A3 - Creative wireless mouse does not work

    My Creative wireless mouse does not work while the touchpad is installed.

    Even if I turn off the touch pad, the seal of the mouse does not work.

    Anyone know how to fix this?

    Thank you
    R.P.

    Hello

    On this path, it is not easy to say what the problem is. I guess you have some software installations to your external device. Install it and it should work.

    As much I know external mouse functionality does not depend on the touchpad settings.

    Good bye

  • The product key on my Satellite Pro P300 does not work

    The product key on my Satellite Pro P300 does not work.
    I entered the key from the sticker on the back of the computer. What I am doing wrong?

    Hello

    Why use this product key?

    Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

    Second, it's an OEM key and it will not work with other versions of Vista!

    Cheers mate

  • The function in my Satellite C660 key does not work

    The function in my Toshiba Satellite C660 key does not work except volume.
    This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

    Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

    Remove the preinstalled version, restart your computer and install the latest version.
    After doing this it works again.

  • Satellite M35x-S161 will not work on battery

    My Toshiba Satellite M35x-S161 will not work on battery power.

    With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

    By pressing the power button with the power supply disconnected, nothing happens. There is no light.

    I suspect the battery is dead, but why it doesn't show 90-99% full?

    Hello

    In my opinion, your battery is dead.
    My old battery was always full, but I could use the laptop to only for 1 min.
    While the battery was empty

    There is nothing unusual issues you may encounter in using mobile phones
    The battery can die one day.

    In my opinion, the battery needs to be replaced

  • Satellite L300-215 - Webcam not working not

    The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
    The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

    Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
    It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

    Anyone out there have the answer?

    I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
    Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

    > I tried some of the suggestions on the assignments, but without result.
    What you have tried to solve this problem?

  • Satellite L300D - 12L does not work

    Hi, my Satellite L300D - 12L does not work.

    I was on windows and it came with a blue screen with white writing on it. I didn't see what he said.
    It turned off my laptop. Then it restarted. He got to the screen saying: start the system restart and start windows normally.

    I did the repair of launch option. He said windows loads the files then pulls up to the Microsoft loading bar then the screen turns white for centuries, just with the arrow cursor. I tried to leave two repair a normal but get the same.

    What can I do? Any ideas?

    Looks like Windows is damaged. I would run Recovery by pressing zero during power on. Backup your data first, because the rags for HARD drive recovery.

    Also check the RAM. www.memtest.org is a bootable CD or a FD

Maybe you are looking for