width of plots of bars

Similar Questions

• How can I determine the width of a menu bar

  Several years ago, I had suggested a CVI function to determine the width of a bar menu (in pixels), so that the minimum width of a panel could be calculated more easily - now for the new year I would like to repeat this wish as it seems that this possibility is still missing...

  Best wishes for 2009,

  Wolfgang

  Hi Wolfgang,.

  It's a good suggestion. I'm sorry that we have not acted on it so far. We'll add an attribute that will perform this task in the next version of the CVI.

  Thank you

  Luis

• Determination of the width of the chart bar

  Hello
  The width of my chart is "1024". First question is I put this width in percentage or a variable?
  
  The other issue that I face, is that if I get only one bar in my chart when its width is great because I fixed the width of my chart as 1024. Is their a way I can specify the maximum width of a bar of a graph?
  
  
  Thank you
  
  Issa Khan
  
  Published by: Issa Khan on May 24, 2009 22:11

  Q1: No you cannot, the current graphics engine only accepts integers possitive

  Q2: Try playin around the PCXML file for the chart width:
  PercentSpaceBetweenBars = PercentBarDepth ' 10' = PercentBarWidth '60' = ' 50'/ >

  Concerning

  John
  http://obiee101.blogspot.com/

• Plotting bar help please

  Hello

  I have spent some time on it and could really use some help please. I have looked at the plot in real time in the help, searched the forum, but the examples isn't enough similarity for me change.

  The attached vi is a graph of the waveform (with bars) which I use to show a single value read from a text file. The value in the text file will update once every half hour (from a data logger), for a total of 10 hours (20 values)

  I would like to see each point on the graph from left to right with a spacing between the two. The value in the text file will pass (never down) so the plot resulting bars resemble a staircase (but with heights different step). The process will continue with a small break between two periods of update files and previous data points (bars) must therefore be kept (and available by zip, so I can code pretty easily).

  Could someone show me how this could be achieved?

  Thank you in anticipation

  Ray

  Hi Ray,

  Here are a few examples.

  The first - mod bar graph - uses a node back feeding to see if an item has been added to the data file.

  You can consider using a graphic as in the second example - graphic bar. With a graphic, you can change the number of data points to resize the waveform table. In this example, a shift register is used to allow only insert new values into the table.

  Steve

• Where can I find the Helper of Plot Bar 3D LabVIEW in 2014?

  Hi all!

  Sorry if this question is trivial. I know this is supposed to be pretty simple. However I fail to solve the problem.

  I need to generate a 3D bar plot.  For this, I found the attached example VI: 3D bar with custom labels chart 2013.vi.  I tested this 2013 LabVIEW VI and worked perfectly.  However, I have to work with LabVIEW 2014 (German edition, SP1, f3). When I opened this VI with the 2014 version, I get a broken VI.

  I realize I don't think 3D Helper.vi of Plot Bar where I used to find it in the version of 2013 in my 2014 LabVIEW (see image of attachen). In addition the broken VI seems not to recognize the custom 3-d bar graph indicator.

  I appreciate any help you can provide to me!

  Sincerely,

  Diego

  Hello everyone!

  I just found the cause of this behavior. The Helper of Plot 3D Bar is not available in the basic development system.  It was possible to see in the 2013, because it was a trial version where the VI is available!

  Thanks anyway!

  Diego

• Stupid or Smart error in LV2010 bar plot?

  A new feature for LV2009/LV2010 is error bar plot. But I have the following problems for this new and I was wondering if someone can help me to solve it:

  1: I can't directly copy error bar plot in ppt or word file.

  2: I can first export of the plot of bar of error in an image file, then import it into the ppt/Word file, but a big problem, it's the plot legends are lost. The legends of the plot are essential to a conspiracy which several cureves information. and I can't find a way to solve it.

  Grateful if someone can give me some solutions how can I copy/import the plots including the legends of tracing error bar in a ppt/Word file. Thank you

  Alex

  You can use the Get Image and save it to .png (.gif or .jpg):

  EDIT: Note that, because of the way extracts work, the code snippet included a control reference. You can simply create the method directly from the command by right-clicking and selecting create-> node invoke-> get Image.

• The address in the bar of naviagtion bar is small and search bar. I want that the address bar to be longer than the search bar

  In the naviagtion bar, the address bar is very low in the space, and the search bar is very long. I want the address bar to be long, so I can read the entire address and the short search bar. Thank you

  While in normal mode (and not in customization mode), you can place the mouse pointer between the address bar and the search bar, and it will become an icon of resizing that you can slide right or left with the left button of the mouse to change the relative width of the two bars.

  • https://support.Mozilla.org/KB/search+bar

• Bookmarks toolbar icon minimize after 1600px resolution due to the address bar, why?

  That's how my favorites looks like Ctrl + Shift + B
  http://prohardver.Hu/DL/UPC/2013-07/122010_4304.PNG

  This is what it looks like to 1650 + widescreen.
  http://i.imgur.com/DGrwLEC.PNG

  This is what happens when the size of the screen reaches 1600px ~.
  http://i.imgur.com/hziXVBF.PNG

  It is a problem with my laptop with large screen of 1366px. And it was good until last year when I've upgraded to a new Firefox every night a few months ago, and this problem occurred.

  And the cause of this problem is the address bar, if I removed it the icon has not disappeared (minimize)
  Tried to change the width of the address bar, but nothing helped. What can I do else? Only this folder of bookmarks disappear, all other icons of stays...

  Reset firefox it's a hilarious response. Please stop suggesting such a thing, when it's not neccessery. Since I have not had a response, deleted a few files and the localstore.rdf came out to be the problem, deleted icons and rearranged, again, now it works very well.

  Your solution is dumb as hell, why the hell I start all process (with 30 extensions etc.) during the Setup and can be ended with the same bug?

  I can't give a lot less for your 'solution' but you should go to the corner and think about what you wrote!

  If I wanted to hear a stupid thing like that I would call a stupid to get answers support center "have you tried to turn it off and on again?" ...

  I'm really upset and angry about this, it was the first and the last, I tried to get responses here, I thought it's a smart/good support site, I was wrong.

• I want the address bar so that my bookmark bar can show more than three icons when it is placed on the same line.

  I have about five to ten icons bookmark in the same line as the search and address bar. So I use customize... and I put the bookmarks on the same line bar. I leave the "name"-textbox in each bookmark in white so that only the icons. ""

  However, only two icons appear and the rest are displayed in a drop-down list with an arrow you click.

  I need not address bar to take 70% of the screen. I don't want the bookmarks bar to use an additional line. I just want to have the icons of bookmark five to ten next to my search and address bar. Is this possible?

  The address bar and the search bar, that both have a flex attribute that makes then take all available space.
  
  Items in Bookmarks Toolbar folder probably has a minimum width that can just make a bookmark with a maximum length label (in your case two icons).

  You can set the width of the address bar and the search bar to force a maximum width of these two bars max.
  Definition of a minimum width for the bookmarks toolbar items will probably work as well.

  Add code to the file userChrome.css below default @namespace (setting the width according to your needs).

  • http://KB.mozillazine.org/userChrome.CSS

  Customization files (interface) userChrome.css and userContent.css (Web sites) are located in the chrome folder in the user profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #urlbar-container { max-width: 400px !important; }
  #search-container { max-width: 200px !important; }
  

  You can use this code to set a minimum width for bookmarks toolbar items if you want to experiment with that.
  
  You may need to set a width max as well.

  #personal-bookmarks { min-width: 200px !important; }

• HOW TO MAKE DATE VISIBLE CONSTANTLY TO THE POINT WHERE IN THE NOTIFICATION BAR?

  I know that the date appears when I hover over the time. And I noticed that if I develop the width of the notification bar, the date will appear. But I don't want to do the bar is wider. I want just the date to display next to the time. I also know that I can go into customize Notification icons. HOWEVER, there is no icon to select which corresponds to the date display. (In a screenshot of another list of users, I saw a globe-type icon corresponding to the date and time display, but is not on my list.)

  I'd like your help. :^)

  Peace,

  -Virginia
  http://www.IMDB.com/name/nm0403825/

  Hello

  You said in addition to the clock so I initially think not that you need it however, others have
  said it would be a good idea to show this method of date display. Also if you are moving
  the taskbar vertically then the date is also displayed.

  Always see the day, date and time in the taskbar
  http://freewindowsvistatutorials.com/meetWindowsVista/taskbarAndSystemTray/showDayDateAndTimeInTheClock.php

  You can increase the highest taskbar - right click it - uncheck lock the taskbar then High grad
  He and raise more high and the date which will be under the clock.

  --------------------------------------------------------------------

  I found a utility that makes T-clock - free - 3 references to it:

  Windows7 like clock on the system in Vista & XP tray
  http://www.tothepc.com/archives/Windows7-like-clock-on-system-tray-in-Vista-XP/

  TClock: See the Date Look like Windows 7 & time in the system tray in Windows XP and Vista
  http://www.askvg.com/tclock-show-Windows-7-look-like-date-time-in-system-tray-in-Windows-XP-and-Vista/

  T - Clock of the Stoic Joker
  http://www.greggdeselms.com/tclock.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to adjust the width of the scrollbar in Windows 7?

  I don't see the screen of the option of setting the width of the scroll bars. Where di go?

  Outlook, on the Tools menu, Options, tab 'Mail Format', 'Editor Options', 'Check' button (left), task button "dictionaries".

  You should find a path something like %userprofile%\AppData\Roaming\Microsoft\UProof and filenames as 'Custom.dic '. If the custom dictionary dialog box does not open, you must use the repair for Outlook feature. (Control Panel, programs and features, point Rightclick Office...)

  Sometimes I see people having problems with permissions, such as "access denied." It is usually a form of 'import' problem with an old profile. Multilingual problems can usually be solved in the mentioned the custom dictionaries dialog box.

  Not to take you to task, or something like that, but you might be better served by starting your own thread on this sort of thing. There is now a new series of office available answers forums, but I hesitated to rush once again this thread.

  Microsoft Office Outlook

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Width of the scrollbar when the execution does not any more large

  Hello

  I created a simple form with a vertical scroll bar.

  I wanted the width of the scrollbar in 50 or even 100 so that it could be used easily on a touchscreen device.

  The scroll bar appears to resize in fine forms Builder, but at runtime, it is up to the standard width.

  I'm doing something wrong or is the width of something that cannot be changed during execution?

  Thanks in advance

  Richard

  Dear Richard,

  If you are using forms 6i, you will get the width of the scroll bar, as it did at design time. But in 10g and 11g, the width of the scrollbar will be reduced to 12 during execution.

  Manu.

• lower navigation pushed wrapper bar

  I use Dreamweaver CC 2015.3.  I had built a site with an earlier version of DW with no complaints.  In this new version, two of the pages have the lower navigation bar and the footer in the wrapper.  The code below is from the home page.  In this case DW shows no errors, even if there is an unpaired < / div >.  The navigation bar and the footer are still in the package.  Below that is the code for the page that moves the navigation bar and the footer under the wrapper in the background image and extends to the width of the display bar.

  < nav id = "btmnav" >

  < ul >

  < li > < a href = "index.html" class = 'thispage' > home < /a > < /li > "

  < li > < a href = "coach.html" > your Coach < /a > < /li >

  < li > < a href = "about.html" > on < /a > < /li >

  < li > < a href = "bio.html" > Bio < /a > < /li > ""

  < li > < a href = "contact.html" > Contact < /a > < /li > ""

  < /ul >

  < / nav >

  <>footer

  < p > & copy; Copyright 2016 OCC < /p >

  < / footer >

  < / div >

  < / body >

  < / html >

  -------------

  In this case, the code is the same, except for 'thispage' moving to and adding the < div > tag to clear the error.  However, the bottom navigation bar and footer is missing.  Does anyone know what Miss me?  Many brain cells, of course.  Thanks for your suggestions.

  -------------

  < nav id = "btmnav" >

  < ul >

  < li > < a href = "index.html" > home < /a > < /li >

  < li > < a href = "coach.html" > your Coach < /a > < /li >

  < li > < a href = "about.html" class = 'thispage' > on < /a > < /li > "

  < li > < a href = "bio.html" > Bio < /a > < /li > ""

  < li > < a href = "contact.html" > Contact < /a > < /li > ""

  < /ul >

  < / nav >

  < div >

  <>footer

  < p > & copy; Copyright 2016 OCC < /p >

  < / footer >

  < / div >

  < / body >

  < / html >

  First of all, in coach.html lines 14 and 5 are in the meantime the andTags. It will be a concern for DW and browsers. Place called lines in the head element.

  In the same document, there is an end to line 43 div tag (). Delete this line, but also line 53, which contains a div tag departure. For about.html

• How can I insert images of full-width that reach until the edges of the browser window?

  I would like to insert pictures full-width that reach until the edges of the browser window. When I try to do and break the boundaries of the image to the absolute limits of the page in edit mode, you can push the image back to the borders of the body in preview mode.

  
  I can do rectangle normal blocks full-width, but no pictures.

  Who can help me?

  1. Create a box, and then click the '100% width' along the menu bar icon to define your area to scale to the width of the browser.
  2. Import an image in the box using the parameters shown in the second picture,

  

  

• Forms progress bar

  How can I make progress forms bar

  You can use the push button to show them that the progress bar.
  Just keep on changing the width of the progress bar to enlarge the progress bar.