WiFi configuration after initial installation

Similar Questions

• How to re - install Photoshop CC after initial installation?

  How to re - install Photoshop CC after initial installation?

  Run the cleanup tool to remove Ps CC:http://www.adobe.com/support/contact/cscleanertool.html . Restart the computer and then try to reinstall the Ps.

  Kind regards

  Ashutosh

• the configuration after the installation of forms 11g has not

  Hi all
  I was installed forms and reports 11 g successfully.
  WebLogic: 10.3.2
  Forms and reports: 10.1.1.2
  
  My problem, progress of configuration does take long time for the "AdminServer restart" task and I expect a lot of hours
  and still no progress
  
  Please help me
  
  Best regards

  FormsEleven - Posted the: December 7, 2010 04:46

  I think that Windows 7 is supported as a developer box. This means that you can install EM and other components of the system.
  Simply select forms & reports execution time and builder and your configuration must go through the fine.
  >
  In fact, forms 11g is the only version of forms/States manufacturers certified for Windows 7. The key is to open the properties of the SETUP.exe and select "Run this program in Compatibility Mode for Windows XP SP2" and change the settings for virtual memory (VM) to manual and specify a setting of at least 1024 MB VM. The Oracle installer cannot detect the settings of the virtual machine when Windows automatically manages the parameters of the virtual machine. After you have properly installed and configured WLS and forms/States, you can change the setting of the virtual machine to run Windows.

  user1079072 - posted: December 7, 2010 06:55

  I'm install forms 11g for reason to use shapes and generating reports and I have no need for forms or States >
  If you plan to run a form or a report of builders, then you need to forms and reports Services installed and configured successfully. If you do not have to run a form or a State of builders, so it is not important for these services must be configured.

  user1079072 - posted: December 7, 2010 01:43

  I select portal and discoverer in the installation
  I didn't OID or a proxy server
  I have install weblogic, forms and reports to the same machine >
  After installing Weblogic Server (WLS), blew the WLS configuration? If you have run the configuration, it is probably the reason for the failure of 11g Oracle Fusion Middleware (OFM) configuration. According to Oracle install instructions for OFM 11 g, you ignore the configuration of WLS, as 11 configuration process g of BCI will perform all the necessary configuration for WLS and BCI. (Take a look at the document My Oracle Support: how to install Fusion Middleware 11.1.1.1 / 11.1.1.2 reports only [854117.1 ID] for detailed installation instructions and forms).

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Satellite L750 PSK1WA: Can I change from 32-bit to 64-bit after initial installation?

  I chose 32-bit during my first installation after buying my L750 PSK1WA-03C00R with i5 2410 M CPU.
  Can I change to 64 bit so that I can access the 8 GB of RAM that has been installed.

  Thank you.

  Hhmmm I think that this should be possible. You have to start the process of recovery once more
  Check this Toshiba HowTo: how to do a system recovery
  http://www.MyToshiba.com.au/support/items/FAQ/71

  1 press and hold the power button for ten (10) seconds to turn off your device.
  2 press and hold the 0 (zero) on the top of the keyboard (not the zero on the numeric keypad key) and at the same time, press the button power once to turn on your laptop.
  3. when the Toshiba screen appears; release the 0 key.
  * 4. If you are prompted to select 32-bit or 64-bit operating system; Click on suivant.*
  5. When you are prompted by the warning screen; Click Yes to continue the system recovery.
  6. Select recovery of factory default software; Click Next.
  7. Select Restore to out-of-box state. Click Next again.
  8 Please read and acknowledge this last warning screen
  9. click on next to start Recovery

  This could also be useful if you're wondering why you didn't receive the disc:
  http://www.MyToshiba.co.nz/support/items/FAQ/69

• No Wifi connection after the installation WIN7 on Ideapad Y510

  Upgrade to a larger hd and win7 Home premium. Installation went perfectly except for one thing - no wifi on intel wireless wifi link 4965ag. Convenience store shows the NIC 'not connected' and fails to pass 'association test' on a wireless proset software. Lenovo introduces only the drivers vista and xp for intel 4965ag. At Intel site, ran its Analyzer and he finished best driver installed, I had.

  This is my thread at M$ this wireless connectivity problem is HUGE in Win7.

  I also posted on the Intel website, a helpful reader suggested I try here at Lenovo.

  Anyone having this problem when upgrading to win 7 and how you solved it would be great! I've been working on solving this for 3 weeks and I am puzzled. Thanks for any help. Matt125

  Ah-Ha! Conductor of energy did not work. Don't know if deployed correctly. M$ did not win 7 compatible with Intel 4965ag backward. SOLUTION: BUY A USB WIFI! THIS PROBLEM SOLVED NO WIFI CONNECTIVITY. USING MEDIA LINK USB WIFI. SOLVED. THANKS FOR THE COMMENTS!

• I have discs cs6 master collection and after initiating installation, it stops the installation process.

  If anyone can tell me is it installed, I need especially first pro.

  Hello

  Can you please try to download the installer from the link below:

  Download Creative Suite 6 applications

  Kind regards

  Sheena

• Colors in Windows 7 too bright/faded after running Windows Update for the first time (everything was going well after initial installation). See the details.

  I just installed Windows 7 Pro on a HP Pavilion with a HP w2007 20 ". I have had no problem of color first and everything worked fine. The first time I ran Windows Update, it included an optional update called "HP - display - HP w2007 LCD wide screen". That the update "has failed" to install and when I rebooted, my screen had a look very 'neon' - my desktop background, a picture of a tree with a bunch of Red leaves, was very washed out and now most of the leaves were bright red with no visible details. This is obvious everywhere, not only my desktop background (another example... small green circles next to the names of Gmail chat contacts are very bright green, more even than usual). Everything is too bright. I tried the following hotfixes:

  -Manually reinstall the update of the HP screen (it worked this time) and restart - did not work.
  -Reset my monitor to factory setting - has failed.
  -Download and install the latest HP driver for this monitor - did not work.
  -Through: "Control panel-> appearance and personalization-> display-> Calibrate color" and through an assistant color calibration (that's new for Windows 7?). Also, did not work.

  I have the dual-boot of Ubuntu installed on this machine and I think the colors under Linux are always very well, so I think it's a problem with Windows and not the monitor. Because it was working fine before, I would rather try to get everything worked, rather than the update manually the brightness/contrast of my monitor. Any ideas?

  A useful answer, I got on another forum (windows7forum.com). It worked:

  I had this problem too!

  In my case it is also explained by a driver from Windows Update called "nVidia display".

  Fortunately, I figured out how to fix it:

  1. Open Computer Management (start > right click on "Computer" > Manage)
  2. Select "Device Manager".
  3. Select 'show cards '.
  4. Right click 'NVIDIA GeForce 8600 GT' (or whatever your video card)
  5. Click 'properties '.
  6. Select the 'Drivers' tab
  7. Click on the button "return to the version.

• Configuration of IIS for EPMA after HTTP installation and configuration

  Someone did he do the IIS on EMP web server configuration after initial HTTP configuration without problems?

  We installed the EPM (11.1.2.4 + patches) on your server, as well as of Essbase server a separate B (both are Windows 2008R2). We made our initial configuration of the web server with the Oracle HTTP server but have a new requirement to install EPMA requiring IIS. We have not yet installed IIS on a server. Can we just install IIS on a server and reconfigure the IIS instead of the user HTTP web server? Our load-balanced program requires IIS listening on port 91000.

  It is possible to run IIS on a different port, this is done in Internet Information services manager.

  See you soon

  John

• Install a custom configuration for ESXi Installer for server 28 - Scsi.CRTimeoutDuringBoot value to 1

  Hello

  First off I will say that I installed ESXi 4.1 in about 6 servers to date.  I have a large ESXi Cluster that contains the MSCS virtual machines.  I have the problem that described in http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1016106.  Now, workaround for the value Scsi.CRTimeoutDuringBoot value 1 works fine and shorten time of start of 40 + minutes to 8 minutes after post.  Now, what to install it?  Well, they suck.  Basically before you can actually adjust this via the gui VI client, you must go through 2 trunk of ESXi 4.1 (1 ffrom the CD and 1 after initial installation).  So, basically, to install ESXi on servers 1 takes me about 2 hours.  That sucks.  Anyone know how I can make a customized CD that includes the fix 'Scsi.CRTimeoutDuringBoot value to 1' already?  28 more servers to go and I'm not looking forward to that!  Please help...

  Brett

  And some good links here

  http://www.virtuallyghetto.com/2010/11/how-to-inject-custom-drivers-into-ESXi.html

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• Stuck cursor flashing after "successful installation".

  I went and bought and assembled a personal server to learn ESXi (Tyan MB on VMWare HCL and speced out with 2-8 core AMD proc, 32 GB of Ram, 1.5 to 4 disks) I can't use RAID as it is, but I can live wiothout than learning. Yes, I have invested a LARGE amount of personal money in this!

  After a painstaking hardware configuration on 2 days, I finally pulled above the server had no error with the material, so I installed ESXi. The installation went well without problem. I rebooted, came to the config box, made a few changes to the nextwork settings, and then I think I told him to do something like re-initiallize, I don't remember because I can't go back more!

  When the system is restarted, I got a cursor blinking... that will sit there for hours, no drive or network activity. I tried to reinstall or repair the istall repeatedly with the same result. He finds right after initial start-up as the bios checking, CPU, disks, RAM... then BAM, right to a blinking cursor.

  Thinking maybe it was my readers, I jumped into a disc of Windows Server 2008 R2. I booted from it, she began to install it, it see all 4 of my readers and I went through and re - configure all four drive and deleted all partition is VMWare. I ran the installation and Windows Server set up and works great. So I think that maybe corrected a problem. No, same thing. I even went so far as to format the disk to boot via Raid tool. Yet once... do run install and it ends with "Successful Installation" reboot... blinking cursor.

  This server has been proven as is... and of course, it seems to be no erros material, so ANY help would be much appreciated!

  I'd install ESXi on a USB flash drive, a destination of installation entirely taken in charge. 1 GB or more be done. More is not better, because it won't use more than 1 GB. ESXi extends RAM so he has very little written on the flash drive.

  You must run from a hard disk, if you have defined as ACH or SATA but NOT of RAID controller. I would like to disconnect all except 1 player you sure it's the first disc of the sata channel listed in the BIOS.

  Forum - VMware communities forums upgrade notice will be upgraded the weekend of December 12. The forum will be in playback mode only the Friday 10 December 18: 00 PST until Sunday December 12 2 AM PST.

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.