WiFi highlite not
Dear Sir
my mobile wifi highlite no
What is the problem pl send to mail
Thank you
a.k.Dutta
Hello anant dutta 70,.
Thank you for using communities of Apple Support.
I see that your connection settings Wi - Fi is grayed out. The following support article addresses this specific issue: If a Wi-Fi connection is grayed out or dim on your iPhone, iPad or iPod touch
Best regards.
Tags: iTunes
Similar Questions
-
A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.
The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.
We have just upgraded to OS X El Capitan 10.11.6
I'm pretty confident that the problem is with time capsule, the wifi works with the other router.
When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.
Any help would be appreciated.
Thank you.
Amazing!
I am so embarrassed but understand that I would update in the case where everyone does the same thing.
When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.
Sometimes, just come back to square one.
-
I have a mini end of 2014. When I went to use it yesterday for the first time in a few days, the wifi was not connected. When I tried to connect, it says it can't connect to my router and you want to run diagnostics, she did, but went to the writing of the file when finished. I deleted the network in the network settings. In the wifi connect icon he registered the network with a signal strong. Asked the password when I tried to connect, then he said he could not connect and you want to run diagnostics. Other devices use the same router wired and wireless, so I doubt that it is the router. The signal is fine, the computer is in a loft with router down under and it is no problem to this place for years. I restarted with hardware diagnostics and he couldn't find anything. Any ideas? I can do almost anything with the generated report? I don't see anything in Apple help to know what to do with it.
You can turn off and on the router?
Yo there an error like incorrect password?
-
Turn off Wifi, do not power off after reboot
Title says it all. I'm on 10.11.4. If I disable the Wifi on my MacBook Pro, stop and then start upward once again, Wifi has not reminded to stay off. My old MBP still remembered. No matter what setting I need to change or correct?
Hi ACPLE,
Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your MacBook Pro. If your WiFi settings changes do not seem to be save or 'stick' after a reboot, you can try the following procedure:
1. in the network system preferences panel (Apple menu > Preferences system... > network), select and then delete the left column WiFi network interface (removal by clicking on the button "-" at the bottom of the column):
2. stop and restart your Mac.
3 re-create the same network preferences window WiFi network interface (click on the button "+", then select WiFi).
4. test by disabling the WiFi from the upper menu bar icon right, then restart your Mac.
Please let us know if it works, or if there is any additional information about your question.
Concerning
-
HP ENVY laptop - 13-d029tu: WIFI is not available
After I've updated 10 Windows to build 1607, WIFI is not available and may not connect in any case. What is the cause of the problem. and please help me how to solve the issue.
I'm trying to solve the problem by looking in the windows support forum. There are several recommendation. However, the methods are very risky to try. Then, I'm not sure that the method can use without any problem more >
Thank you
Winai G
Hi @winaig,
Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post and wanted to help. I understand that the Wireless does not work on your laptop.
You can follow the document below:
HP PC - Troubleshooting wireless network and Internet (Windows 10)
And the post below can help:
Common fixes for wireless connectivity problems.
Let me know how it goes.
If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.
Kind regards
-
HP Pavilion 1240sa g6: WiFi does not work after Windows Installer 10
After you have installed Windows 10 today my WiFi is not connecting. I tried updating the driver (Ralink RT5390 802.11b/g/n WiFi adapter) and he tells me its up to this day. IM assuming that this driver is the problem but don't know how I can fix it.
My laptop model: HP Pavilion g6-1240sa laptop, Windows 7 Home premium (x 64)
Hello:
See if the W10 Ralink wireless driver works for you...
TITLE: Pilot MediaTek (Ralink) wireless network card
VERSION: 5.0.57.0 REV: A
DESCRIPTION:
the package contains the driver for the Mediatek (Ralink) installation package
Controller wireless LAN in the laptop models taken in charge running
Operating system.OPERATING SYSTEM (S):
Microsoft Windows 10 32
Microsoft Windows 10 64
LANGUAGE (S): Global
SUPPORTED DEVICES:
802.11n wireless PCI Express Card LAN Adapter
MediaTek MT7630E 802.11bgn Wi - Fi adapter
RALink RT3090 WiFi 802.11b/g/n adapt
Wi - Fi 802.11b/g/n Ralink RT3290 adapter
WiFi 802.11a/b/g/n Ralink RT3592 adapter
RALink WiFi 802.11b/g/n RT5390 adapt
RALink WiFi 802.11b/g/n RT5390R adapt
CORRECTIONS:
-Provides the initial version of Windows 10 support WHQL driver. -
HP Pavilion M7 - WiFi lights not after a reboot. -Windows 8
Hi everyone, I just reinstalled Windows 8 and I am very frustrated with this little problem.
I downloaded the Realtek Wireless LAN driver from the HP website. I installed it. After installation, the WiFi works automatically. Now, after a reboot, the WiFi does not start upward. Everything is up-to-date, I checked in the Device Manager, and I even reinstalled the drivers. It does not just straight up. Everything on Windows said I need to physically turn it on.
Any help? I can't believe that I can't use the built-in WiFi. I currently use a LBS-Link USB WiFi adapter which worked well in all of his application since he came home.
Squerl,
Welcome to the forum.
First of all, you can try a Power Reset, which does NOT affect data on the disk. The power / Hard Reset can help if the problem is in the pilot instructions that are stored in the computer's memory and persist to boot at startup.
Resetting the forced feeding
Performing a Hard Reset or forced Reset
Power reset cannot tell the difference between drivers - it does not analyze a driver before applying. It assumes that all the drivers on your computer belong there.
EXAMPLE:
- If the driver on the disk is the wrong driver before rebooting, it's always the wrong driver after the reset.
- If the INSTRUCTIONS of the driver are tangled, messed up, or there are missing pieces of these instructions, the reset can solve the problem.
Why a power reset works to solve some problems:
The power reset does not install anything on your computer, it does not remove the programs on your computer and Reset does not change the settings on your computer. Your data and programs remain as they were before the reset has been applied. Reset runs old program of the memory instructions and forces the computer go to disk operating system for new instructions.
Why a power reset does not work:
If the problem is more than a simple tangle, if 'good job' on the computer is not good enough - in other words, you need an update, a new driver, or there is a problem that can not be "unraveled", then reset won't work.
If there is a hardware problem power reset will not work.
==============================================================================
Then, you can set the properties of the LAN driver to allow the driver to "wake up" the computer. At the same time, you set the driver to NOT allow the computer to stop the driver.
Windows key + X > M (opens Device Manager) > network adapters >
Right click of your wireless adapter > Properties > Power Management >
Select as appropriate:
Clear the check BOX "Allow the computer to turn off this device...". »
CHECK 'Allow this device out computer' > *Ok
* NOTE
Read the warning on the wireless driver performance while the notebook is on battery.
Remember that this setting CAN have side effects.
=====================================================================================
-
Hello, I just got a new HP Envy. However, I was not able to maintain a wireless connection. Generally it will not connect to my wifi or connect only for a few minutes and then say 'limited' and then not at all connect. I did the full windows to the computer updates. I've updated the drivers for the wifi card. I have updated the firmware on my router. I also uninstalled norton. None of them have worked, still no connect or will connect and fall in a few minutes. My information system is the following:
Product name: HP ENVY TS m6 Sleekbook
Product number: EOK41UA #ABA
[Personal information]
BIOS (Setup): F/.05-05/28/2013 (0883100022305B 00000320100)
Keyboard Review: 86.32
Total memory: 8.00 GB
Processor name: Intel (R) Core (TM) i5-4200U CPY @ 1.60 GHz
My wifi router information is:
Netgear WPN824N N150 model
Channel is set to auto
Mode: up to 150 MB per second
Security: WPA2/PSK [AES]
I have two ipads, two iphones, an xbox, a windows phone, two toshiba laptops and hp Pavilion DM3, which are able to connect and maintain free wifi without problem (not all connected to the certain time necessarily-, it is not a problem of overload). The network works fine, I just can't understand what is the problem with this HP Envy.
Well, after I saw that the wifi worked in safe mode, I went into the startup applications and managed to turn them off and restart the computer to find out who was playing with the wifi. I have disabled startup motoralla bluetooth software and disabled secure boot. He is immediately connected to wifi and not him has not yet declined. Problem solved.
-
WiFi does not work for you but that anywhere else?
Hi can anyone advise of why I can get WiFi anywhere else, but at home? It is said no internet connections found even my neighbors WiFi can not be detected...?
Please, it's my head!See you soon
MickHave you tried to reboot your router?
Can you establish internet connection using the LAN cable?
Try unlocking your WLAN to check if the connection is possible.
If nothing helps try to contact your internet provider and ask for help. -
WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS
My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
How can I fix?There is wifi on other computers, but not on this laptop.
Hello
You always win 8?
Microsoft has already published the Win 8.1 System.
It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.The 8.1 update win is free and you can download the Microsoft Store update files.
Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.I guess that after updating the WLan would work properly.
-
WIFI does not work on the Satellite L650/078
Hello
Hoping someone can help, on my Satellite L650 WIFI does not work.
No Wifi or Bluetooth functionality. The light is not on and the function key is not brining to the top of all the options.Any ideas on how to solve this problem?
Hello Covie
Do you use the laptop with the factory settings?
When you use the FN button you find cards flash at the top of the screen?Try please restart flash cards. Start > all programs > Toshiba > utilities.
Please post comments.
-
Re: Portege M800-10Z - WiFi does not work
Hello.
I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.I tried to upgrade the wireless Lan driver, but it still does not work...
I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
Is there someone who could help me with this issue?I would be very grateful for advice.
Thank you very much
Hello!
That you say with the WiFi does not work?
Can you connect to the router?
The WLAN card is recognized in Device Manager?To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.
Also disable features of security as a hidden SSID, MAC address filtering and so far away.
Check if an update of the firmware on your router available.Good bye
-
My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.
Hi there Turco911,
Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.
How to clear your iOS device and then set up as a new device or restore from backupsIf this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.
If when restored like new the problem persists, I would ask for your phone service:
Repair - iPhone Apple Support
Thank you for using communities of Apple Support, all the best!
-
FN + F8--> 'wifi is not activated. Turn on the switch.
Hello
I reinstallled the Windows 7 64-bit recovery DVD and I noticed a problem which the utility Flash Cards do not work. So I downloaded the package of added value.
Now Flash cards made its appearance, but when I press Fn + F8, I get this message: 'the Wifi is not activated. Turn on the switch! "SRY for the imperfect grammar.
If you have a small switch WLAN on your laptop to the position we walk in first. After doing this using FN + F8 key combination.
What model of laptop do you have exactly?
-
Satellite C850 PSKC8E: WiFi does not work after upgrade to win 8
I have improved my win 7 to win 8 and now wifi is not working on windows 8! Help me!
I HAV Toshiba Satellite C850 PSKC8E
What this means exactly: it does not work?
Did you install Wlan driver?
Wireless network card is recognized in Device Manager?
Have you activated the Wlan before trying to use it?
Maybe you are looking for
-
Sampling processes 760 3 seconds with 1 millisecond of execution time between samplesFinished, samplingsymbols of treatment...Analysis storedownloadd (pid 760) sampling every 1 millisecondProcess: storedownloadd [760] Path:/System/Library/PrivateFram
-
Satellite L450-181 - how to connect to the TV?
How to connect my laptop to my Toshiba regza TV?
-
HP Deskjet 1050a scanning problems - can't set preferences
"scan images as separate files is gray" so cannot change the default location for the scanned documents be transferred to.
-
error installation updates the changes__ conversion
This happens whenever I have try and update my system
-
Hi, I'm wanting to add text to a form of jpeg image. I can use the link in the menu 'A' to do it now, but I wanted to change the font, etc. I read the content of help on the paint to see if there was a way to change the police etc & he says under th