HP Deskjet 1050a scanning problems - can't set preferences

Similar Questions

• OfficeJet 6500 has more than 710: scanning problem - can't do PDF

  Recently connected my all-in-one to a Pavilion 23 all-in-in-One and no longer offers me PDF (incl. multi-page) as an option of - limited analysis in format BMP, JPG, PNG, TIF - tried to download new drivers, but that the process hangs out with a message that I maybe not sufficient authority to go forward (?) - offers a new attempt, but again the same problem : can anyone advise as to how I can go back to the "good old days" when I could easily scan a multiple page PDF?

  Hello

  What is yourx E710? Please try: download the following file and install it on your computer first. You will have to perhaps after return of the right x of your printer:

  http://ftp.HP.com/pub/softlib/software12/COL34830/MP-109384-3/OJ6500_E710n-z_1315-1.exe

  Kind regards.

• DeskJet 1512: scanning problem

  Hi, I have deskjet 1512 all-in-one printer. I have a copy in black and white button as well as a copy in kept button but can not see a scan button as I had on my old previous model?  Is it possible to scan breeds?

  Thank you

  Hello

  Your pritner do not offer a scan button, so scanning should be launched from the HP software.

  Click the HP Deskjet 1510 icon on your desktop or in the start menu > programs > HP > printer your template folder and press on scan a Document or Photo and the ofllow the steps on the screen to scan.

  You can find more detailed information of its options in the section "scan with the HP scanning software":

  http://support.HP.com/us-en/document/c03466081/

• DeskJet 2540: Scanning problem

  I recently bought the 2540, set up and it works fine.  Well, fine as printer and copier... not like a scanner.  The booklet accompanying indication on digitization, and there is no manual online to download.  It says "scan" on the matter, but no guidance on how to analyze.  Sense please, anyone?

  Hello @YolandaLand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your scan feature.  I would like to help!

  I recommend to remove printer ink cartridges and reset the power supply.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest also download and run the HP print and Scan Doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Can't set the fax modem in Win Fax & scanning. I get the error "an error has occurred. Try again or contact your system administrator. »

  Original title: can't set the fax modem in Win Fax & scanning

  I have install Vista Pro on my laptop at home with me and wife that both put in place as administrators. I recently reinstalled (Clean) Windows Vista and am trying to reload all data and software.

  I have successfully set up Win Fax under my account and power send & receive faxes, but when I tried to put in place the fax under my wife account I get the error prompt:

  "An error has occurred. Try again or contact your system administrator. »

  Prior to the re - install, I have had no trouble creating and directing Win Fax in both accounts.

  I tried to remove and re-create the account of my wife, but all without success. It is a major pain because it is my wife who is the main user of the service of fax for his work.

  Help, please...

  Hi HamptonBirds,
   
  (1) what is the brand and model of your fax machine?
   
  Follow these steps in the order of appearance and check if it helps to solve the problem.
   
  Step 1:
   
  Verify that the following services are defined as follows, and you can start each service:
   
  a. click on start
  b. in the type of search option 'services '.
  c. now, make sure that the services below are the following:
   
  Connections - Manual
  Telephony - manual
  Remote access connection manager - Manual
  COM + Event System - Manual
  Remote Access Auto Connection Manager - manual
   
  Step 2:
   
  Turn off ADM (Windows Fax and Scan)
   
  a. click on start
   
  (b) in the search box, type "regedit".
   
  c. find HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts, delete all the keys to void.
  
  d. run WFS high the first time. This should allow to recreate the appropriate accounts.
   
  Registry warning
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
  
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Can't set up wireless Deskjet 6840 to brightbox Router 2

  I had my Deskjet 6840 connected and printing wirelessly through a netgear router, but EE upgraded me to 2 Brightbox.

  I connected the printer with an ethernet cable and it works fine.

  However, when I download and run the installer HP Deskjet 6800 series on my Windows XP machine and try to set up the printer to print wireless using the router, two things happens:

  1. the installation software ends with a 'serious mistake' and restores

  2. If I try to change the settings during the installation process, the Setup Wizard rejects my password/WEP key as invalid before you even attempt to use it.

  Can anyone help?

  I solved it!

  This article gave me some clues:

  http://www.TechSpot.com/community/topics/HP-DeskJet-6840-network-problems.177199/

  I printed manually the configuration of the printer using the HP help page:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00207484-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1393605670408.876444892.492883150#N102F7

  Print a Network Configuration page

  Prints the page with detailed information about the settings and wireless and network status. It is available in English only.

  1. Make sure the printer is on and idle.

  2. Press and hold the button to report Page.

  3. Press the button cancel four times, and then release the report Page button.

     Then I typed the network address in my browser to go directly to the configuration of the printer

     Under the 'Network' tab, I launched the wizard and confirmed my SSID

     On the next page, he asked the WPA password and explained that it could be numbers or letters

     Here's my problem: the standard password provided by EA included hyphens!

     I connected to my router and removed hyphens from the password

     I entered the new password in the wizard for the printer

     AND IT WORKED!

• If I set up a wireless Deskjet 3052 a network can I switch to USB later?

  If I set up a wireless Deskjet 3052 a network can I switch to USB later?

  Hello

  Yes. In fact, I am currently using my printer in both directions. I plug into an old desk via a USB port. I turn only my old machine on a few times a month, but the USB port is always connected.

  Kind regards.

• I need the English version of Photoshop and Lightroom.  The problem is that I live in Barcelona in Spain and Suffolk, Virginia.  My Bank and credit cards are all in the USA. How can I set up the plan of photography.  I want to pay the price of the English

  I need the English version of Photoshop and Lightroom.  The problem is that I live in Barcelona in Spain and Suffolk, Virginia.  My Bank and credit cards are all in the USA. How can I set up the plan of photography.  I want to pay the price of the English version.

  Hi Larry,

  I see that you have you have a creative with email even cloud as with forums account and some countries such as the Spain.

  To order the creative cloud with a credit card the United States, you must have an Adobe ID with United States in your country.

  The country store & the Adobe ID, payment details must be same.

  For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:

  Change the country associated with your Adobe ID

  If you wish to contact our support group for assistance, please visit this link: (be sure to connect to adobe.com with your Adobe ID first)

  CC_membership-account-payment-support

  Hope this information is useful.

• I can't advocate windows to cmplete a scan, it always gets stuck on a file and will not finish scanning, what can I do?

  my windows defender, is arrested in C:\Windows\Home Premium.xml at the tripping and won't go any further on the scan, what's the problem?  It also stops at C:\Windows\unind.exe,what of wrong with her?  He did this for about a month now and I had to close my computer, restart it and try and restart windows Defender, and it always stops at a file any

  Hello

  This tool of troubleshooting for Windows 7 - Vista is similar - to use XP RUN instead of start - search.

  Two possibilities include disk and malware problems.

  Disk problems can take seriously very quickly so I carefully check the disc now and do not forget
  to keep redundant backups of your important data (use several methods).

  Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  GOLD:

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ----------------------------------------------------

  For even better and more efficient to check:<- advanced="">

  At the Recovery Console prompt (if you have one) or a Vista/Windows
  disc 7 - If you do not have a Vista/Windows 7 disk you can borrow a friend (it must be the same
  32 or 64 bits and they are not protected against copying) or make a. Also your system manufacturer will sell the
  physical disks cheap since you already own windows.

  Chkdsk /f /r

  RESET

  After k and before space / f and before.

  sfc/scannow

  RESET

  Space after c and before.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  ----------------------------------------------------------------

  Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Define the
  Start the command of CD/DVD disks of Windows (Vista or Windows 7 If you have installed.)
  Be sure to set in when.

  If you need to repair disks - these help repair Windows not re-install.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  =====================================

  If CheckDisk is unable to fill as above:<-- manufacturer's="" diagnostic="">

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en
  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Conflict of Driver HP Deskjet 1050a

  Printer HP Deskjet 1050a, Windows 7, driver conflict error

  I noticed that whenever I went to print, the elements would be appear in the print to see what is so would disappear and not print. When I could not print, I ran the HP diagnostic tool, who met a driver conflict.  I followed his instructions and uninstalled the current driver and reinstalled the latest driver. I tried via the cd and also download on the hp website, but I still cannot print.  I restarted the diagnostic tool again with the same result, met a driver conflict.  How can I get rid of the conflict driver for my printer?  Thank you.

  Try using a different printer driver. That should clear up the problem.

  How to assign other drivers to print in different Versions of Windows

• Premium Fax e-All-In-One c410: Premium Fax e-All-In-One c410 printing, copying and scanning problems

  My c410 HP Premium Fax e-all-in-one won't copy (white spell page), only prints in faded gray even when the quality is set to 'best', will only print up and part side of page - excludes the middle of the page and analyze only a portion of the document.  A new black ink cartridge has been installed in a couple of weeks.  Supply levels say the black is full, all the color is 3/4 full and the photo ink is full.  The printer has been idle for a few weeks - I had to restart it returning to work, because he wouldn't (and is often not) respond to print requests.

  Hi @14141,

  I see by your post that the copies are to come in white and black is printing in grayscale. I will definitely do my best to help you.

  Please, try the steps outlined in these documents to see if she will help solve this problem. Do not take into account securities.

  Problems print quality setting for the HP Photosmart Premium Fax all-in-One Printer Series (C410a C410b, C410c, C410d, C410e).

  An "Incompatible cartridge ' or 'Ink cartridge problem' message for HP Photosmart Premium Fax e-All-in-One Printer Series (C410)."

  Inkjet printers from HP - "Ox."... «or «C2...» "Error code appears.

  I have also provided a few steps to troubleshoot issues when you try to print from the Mac.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +.

  Then click the Add button.

  You use genuine HP cartridges?
  What are the ink levels?

  Let me know the results of the Diagnostic print quality report?

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks

  Hi, windows 7 Disk Defragmenter problems daily schedule set for all discs, never happens, it sometimes takes weeks. Have a disk busy on the farm that is used for the storage of video surveillance. When I realize the performance issues, I check and find tht 'daily' Setup for MS disk defragmentation is not in fact run every day. I am watching silent movies and waiting for a 500 GB drive to effectively defragment, pass it is on average 1 percent per minute (with any other IO goes on the disc and app collection closed).

  There must be (I hope) a flag I can put to Disk Defragmenter to be more aggressive in its analysis.

  It is Windows 7 64 bit running on AMD processors, disks are sATA plugged in, although there is also a matrix RAID PCI Promise, it's usually when I started Hello I/O on the Board of 2 TB or utilization of the 'C', I realize the lack of defragmentation. I recall, before the SP1 under WIN 7, he ran on a daily basis, in fact, rather than an API algorith "guess".

  System is in place 24 x 7 (I turn off the monitor at the time of sunset), there is no "powersaver" feature used on this particular device. I edited my original question because after many years of support, I realized, by asking the initial question, that I was not providing information that I would be asked a customer, if I was still doing this job.

  Kind regards

  Lorin Boyack

  Hello Lorin,

  There are several reasons why the built-in Defragmenter may not work correctly:

  Method 1: He is also a malware on the system. Solution: Run an anti-virus control and also a spyware check.

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: The disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3: The disc is damaged and must be repaired. Solution:

  a. open "Computer" and right-click on the drive that you want to disable frag.

  b. Select 'Properties' and click on 'tools '.

  c. Select "Check now" to check the drive for errors.

  d. Select the two options and click on 'start '.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

   

  Important: While running chkdsk (check disk) hard disk, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  Method 4: Disk Defragmenter may be corrupted, requiring a system restore to fix.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

   

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 5: There are other programs that are running this interruption, the built-in Defragmenter. Solution:

  a. close all running programs.

  b. If you think there may be some programs that run in the background.

  c. press Ctrl + Alt + Delete and

  d. Select "start Task Manager".

  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Can I set up a secondary monitor to the HD on my iMac mid 2011

  Can I set up a secondary monitor to the HD on my iMac mid-2011 with no problems. I cannot afford to upgrade to the new iMac 27-inch and wanted to update my monitor.

  Is this possible on the Mid 2011 iMac?

  Yes.

  Your best option is to choose a good monitor that has Display Port or DVI input and shy away from those who only have HDMI and VGA input.

  For a display Port monitor you will need a Mini Display Port to Display Port cable if it is not provided with the monitor.

  For a DVI monitor you will need to a Mini DisplayPort to DVI adapter and a DVI cable.

• How can I set a default zoom for the browser (freeze)?

  Hello, there is a possibility of using the CTRL ++ to enlarge the Web page, but he returned to the default zoom of Firefox in the middle which is very annoying. In general, I would like to be able to establish a certain level of default zoom and then only if necessary, use the CTRL + / zoom in and out of options. If my optimum zoom level is used for all my browsing unless I change it.

  I listed 2 modules below for you to consider. I did not use of NoSquint, but I use and rely on Default FullZoom Level.

  • You can set a default zoom level in Options DFZL
  • You can use the scroll wheel of the mouse on the icon Add on DFZL bar to increase or decrease the zoom or click the icon and choose from the available zoom percentages.
  • In NoSquint, it is said that he recorded the zoom level of the web page/site.
  • Default FullZoom Level: https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    • More information about NoSquint: http://urandom.ca/nosquint/

  "You can also set a 'Minimum font size' in the Firefox Options > content > fonts & colours advanced."

  • See-> Options panel-fonts & colours window contents

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• can not set default page

  I can't set the default page. It keeps coming back to: http://search.jzip.com/

  1. Uninstall jZip (or jZip Windows or Windows jZip Toolbar) from the control panel > Add / Remove programs.
  2. Open Windows Explorer
     • Navigate to the folder C:\Program Files\jZip Toolbar
     • Double-click on uninstall
     • Delete the folder of Windows jZip toolbar.
  3. In Firefox, delete the add-on if it's there
     • Choose the modules > Extensions.
     • Select the jZip entry Toolbar If it is there and click Uninstall.
     • Close the window/tab of the Add-ons Manager
  4. In Firefox, reset preferences
     • Type of topic: config in the address bar and press ENTER.
     • If you see a cautionary, accept it (promise to be careful)
     • Filter = jzip
     • Results in the bottom panel, right-click each entry and click Reset.
  5. Restart Firefox.

  It would have taken options when installing jZip; See the image below.

  An excellent free application in lieu of jZip (and one that I used for a time very long) that does not install all the 'extras' are 7zip:

  • http://www.7-zip.org/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox