Wifi MacBook air problems.

Similar Questions

• Start to 2008 MacBook Air problem!

  Hey all! I recently bought a MacBook Air in 2008. When I went to power it the Apple logo and the loading bar started to load. But he only go about 5% and then it turns off, it makes a little noise of "pop". Any help appreciated. Thank you!

  You will need to use the original installation media (10.5 Leopard) and see if you can start the MBP with the DVD.  If you proceed with the installation of os x.

  When you see a menu bar, click on utilities.

  In the drop-down list, select disk utility.

  Run disk utility > first aid > verify and repair.

  If the Player cannot be repaired, it must be replaced.

  Ciao.

• Merge with Macbook air - problems

  Hello

  Setup

  MacBook Air running 10.8.4

  VMware Fusion 5.03

  Question

  When launching VMware Fusion and by selecting the settings of the Virtual Machine-> USB and Bluetooth, I expected to see 'automatically' integrated iSight camera in option to pass through to my VM (Windows 7) However, only 2 items listed have been

  • USB Bluetooth Apple host controller
  • Apple internal memory card reader

  To check on Google people see the "Apple iSight Camera" as a merge option, but it does not appear as an option for me.

  Search

  I searched Google gih and low for an answer and can't seem to find it

  I downloaded and installed the drivers from Windows ready for when I get the camera view by fusion - http://www.techrockdo.com/technology/isight-camera-in-windows-on-vmware-fusion

  I checked for the Root permissions - http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2004687

  Checked the VMware KB - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1027964

  I also plugged in a USB headset and then who appears in the options available under USB and Bluetooth and is seen by the virtual machine and works well from the small amount of tests, I have undertaken.

  I checked the camera works well in the native operating system and that fact in a plethora of applications

  I'm not to give up easily, but seem to be running out of ideas now, oh and hair...

  Thanx

  Tony

  What is an air of 2013?  The iSight camera is not a USB - PCIe device.  VMWare is working on that.

• Load OSX on 2014 macbook air problems

  Hey guys, dude this device telling me that he had bought earlier by someone who had deleted the info private and he has said that he needs to enter the password to access the desktop computer. The thing is, no matter what he tried it is not on the desktop, I think the OSX could have been deleted accidentally or not. I also think that the password which he received from the seller is a hard drive password and not osx password. As shown in the first screenshot, looks like this unit came with Yosemite and wants to go to Apple to reinstall, but when I try to do is to show an error. I tried to do a restore, but get a display of the error "Startup disk cannot be used as a source of food.

  http://i493.Photobucket.com/albums/r...ps4ldr8cqw.jpg

  As shown in this screenshot 2nd, is to show that the I can do a reboot "using the recovery system", but I don't know what to do here, any ideas please?

  http://i493.Photobucket.com/albums/r...psrxhwcb5w.jpg

  Follow "If you sell or give away your Mac" in this Apple support document: How to reinstall OS X - Apple support.

• problem sending files for MacBook Air via WiFi analyzed

  I have an Officejet Pro8600 Plus and the interface is via wifi for my MacBook Air. I am running OSX 10.9.1.

  When the document or photo is scanned, it looks good in the HP control window. I can change the functions of the analysis. When I type sent by using the button on the HP screen, it sends only the left 1/2 of the scan, and it is amplified.

  I tried all settings to save the document and the scanner. The only one who seems to be the computer's analysis of general use.

  He did it since about September works.

  I found another setting on my icon of the HP scan dock that works with fewer steps than the capture of scan/Image of Apple.

  The parameter is called general purpose. It gives the same picture with all the editing options available before the analysis is sent to the computer. This little less practice with other presets are included but still retains my scan at least no.

• Slow WiFi on MacBook Air

  I tried searching but preliminary questions are old or unanswered. My MacBook Air El Capitan 10.11.5 is extremely slow on my wifi, with loading sites slowly or not at all. My Dell laptop 3 + year, sitting right next to the Mac quickly navigates the wifi even.

  I don't know what changes I can make network preferences (via DHCP, automatically configure the MAC address, etc.) Any suggestions?

  Please read using the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support. It can offer useful suggestions to improve performance of your Mac wireless.

• MacBook Air Mid 2011 Wifi only next to the Airport Express

  Hey everybody!

  These days I have trouble with one of my MacBook Air. I plug a new as my girlfriend needs a job.

  Anyway. I have updated to OS X El Capitan and struggle with the wifi. I made an appointment at the Genius Bar closest to you to solve the problems in the system.

  As I had to download the OS X on my Mac Pro, I had a problem with the wifi these permissions switch and system information. If you scroll to the installation, there should be a list of installed software. In my case nothing.

  After that the genius of Apple erased the disk and started the installation via ethernet with an Apple Server, I got a new version of OS X El Capitan on it. Everything appears fine (system information).

  The Wifi worked perfectly in the store.

  So, I got not any chance to try at home immediately. Today, I wanted to put the macbook for other facilities. I noticed that the wifi is extremely slow.

  I deleted the cache (which does not yet exist). I have reset the starting power setting. I have reset my Airport express from Apple. I changed the DNS to google DNS (8.8.8.8./8.8.4.4.). I too turned off bluetooth.

  All without any modification.

  BUT if I'm right in front of the apple express (literally sitting on the router), the wifi works without any problem.

  Please, I beg you! I have no idea what to do next. My other Mac Air and pro work perfectly. Any distance. (They have been disabled for testing). iPhone, iPad and Apple TV work fine.

  I seem to have this problem with my MacBook, a model of early 2015. What I was told is that the Wi - Fi antenna is nested in the compartment of the screen, located on the edge, practising thus pressure deforms it. Because the body is made of aluminum, the body involuntarily also acts as an antenna, interfere with the Wi - Fi signal. Here are the two plausible reasons why sometimes the signal is lost or slows down, and it made perfect sense to me.

  Maybe it's the issue here. If that's the case then I would attribute that to the misconception. I'm sure you can get it fixed, although I don't know how you would seeing that Apple seems to weld their new machines stop.

• Why my Macbook Air poster as a bridge to my Wifi network?

  We fight network gremlins in our small office.  We have an unnecessarily complicated network topology, but I don't think that the 'complexity' network is the fundamental issue (guess total).  Here's the situation.

  Periodically, we have network problems that range from individual devices or IP phones, problems at the Internet, across the Office of failures.  The Internet seems to be stable during the network problems and is also big enough to handle the traffic.  There seems to be no problem with the Internet itself - FYI...  We have a mix of Mac and PC, printers, file server and IP phones using the network.  The network is a mix of wifi devices connected and wired devices (PC/Mac wifi wired connected...printers/phones in General).

  The network itself is as follows:

  AirOS WAP which does not respect NOT IPs, just toward the life of a HP switch, which in turn is connected to a D-Link router that handles DHCP.  D - Link is then connected to our Internet modem.  The AirOS WAP is used because it is the signal strength and performance are supposed to be better than the performance of the D-Link wifi.  Note: The wifi radio is turned OFF on the D-Link.  All attached devices appear in the ARP table on the device from D-Link (as expected).

  But and I finally get to my question on the AirOS my MacBook Air (El Capitan) is displayed in the ARP table under a bridge.  It is the only device that appears in the ARP table besides than the D-Link (showing also as a bridge - what is planned).  In other words, my Mac "is differently from any other device in the office, we want to eliminate as a potential problem."

  Any who have thoughts on why my Mac is illustrated as a bridge.  I checked my network settings and nothing seems out of the ordinary on my laptop.  (only the bridge I find together are thunderbolt - that is NOT connected)

  I'm sure that someone has an idea or two on why my device showing as a gateway into our network, and if this could be a problem.

  Thank you.

  After the Ubiquiti AirOS AP firmware up-to-date have been upgraded - if it is not already there - you have Ubiquiti why their software of AirOS reports what is shown.   AirOS has many configuration options and can be configured to distribute the signals with multiple devices Wi - Fi - what you see here, what version of AirOS is involved, how the device is configured, it is something that people of Ubiquiti are likely better to troubleshoot.

  The only way that I expect to see a Mac acting as a bridge is via system preferences > sharing > Internet sharing or maybe lower configurations of command line for access to these parameters.   If Internet sharing is disabled, I would not expect OS X works as a bridge.

  I would be the network inventory and nettoieriez configuration.   (Set in bridge) modem, firewall, to move, to cables and AP (s) systems.   I would use connections wired to the APs when possible and WDS where not.

  If you have the OS X Server autour (this forum), then those who need static IP addresses and will probably also want to wired connections for performance reasons.

  If one of the servers in use is accessible from the outside, we can a required more complex network configuration if you want to isolate the damage caused by a failure of the server.

  Wi - Fi can have serious interference problems in some areas.  Interference can wreak havoc with the connections Wi - Fi and AP, that can walls and anything that can block signals.

  If it's really a D-Link router (like the series DSR, etc.) and not a D-Link gateway area, these routers are not very effective firewall.   He worked with one of these.   Really hard to guarantee.    Not what they are built, either.

• Internet dial-up, now of problems on Macbook Air only service

  I am running OS X El Capitan 10.11.2 on a MacBook Air.  We used to have AT & T pays U, and I never had any problems.  Now we have Time Warner and it seems to work fine on all our appliances (including MacBook Pro my husband) but on my cell every hour or two my internet no longer works and I have to disable wifi then turn it back on and happens to work again.  The indicator never stops showing a sign strong, but I lose all the features of the Internet periodically.  Does anyone have an idea what could be the problem?

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2. If this does not help, please contact support for Time Warner.

• a macbook air connects to another network wifi not

  Hi all

  I visit a friend, and we have two laptops, iPhone and iPad with us. The iPhone and iPad connected without problem. Ditto for the new 13 macbook air inches. The second oldest macbook air is somehow stuck. I guess the network files are corrupt. Who should I remove? I restart the router and macbook air. I tried a clean profile, and yet, I get an error message... Sometimes it says password invalid or unknown error just. I know that the password is correct, and since I doubt my sanity have had several people enter or check it out.

  Thanks for the help,

  Philly

  PS: Both are running any new version of El Capitan

  A user using different admin for any reason seemed to have done the trick...

  No idea why,.

  Philly

• My IOS devices will not synchronize wifi with my MacBook air

  My devices will be simply not sync over wifi with my Macbook air. The message that appears on iPad, iPhone etc. is that they will be synchronized if the Mac is connected. I tried, but it did not work.

  "My devices will be simply not sync over wifi with my Macbook air."

  Via Wi - Fi requires the use of iCloud to synchronize data between your devices iOS a your Mac.

  http://www.Apple.com/icloud/Setup/

• Would be switching to a simultaneous dual‑band 802.11n AirPort Express correct problems with connectivity MacBook Air Wi - Fi

  Right now I use an old AirPort Express Terminal (802.11 DSSS 1 and 2 Mbps standard, 802 11A, 802.11 g specifications and a 802.11n draft specification) with AirPort Utility Version 6.3.6 (636.5). My MacBook Air (13 inches, beginning 2014) intermittently loses the Wi - Fi connection. Move to a 802.11n simultaneous dual‑band AirPort Express would correct this problem? I'd be better off with an Airport Extreme?

  AirPort Express frequently asked questions (FAQ) - Apple Support

• My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  Hello

  Check if the hard disk needs repair.

  Open the disk utility, located app in HD > Applications > utilities

  Select Macintosh HD on the left then click the first aid tab, and then click Run.

• MacBook Air SMC 2013 problem

  Hi all

  I have a problem with my macbook air 6,2.

  The first question concerned the did ' computer t lit.

  The SMC reset and things did ordinary ' t help.

  I took down the bottom of the case and plugged the battery cable. After that when I plugged in the charger, the computer is activated immediately.

  I have taken over the case and restarted the computer, the computer was dead as before.

  I ran a hardware diagnostic test and obtained the PPT001 (drums), PFM001 (MSC) and NDC001 (webcam - it's weird because I can use the camera).

  Now I turn on the computer without the bottom of the case, but the fans are running high etc..

  The adapter led is not lighting, and when I push the SHIFT, ctrl + alt the computer immediately turns off.

  Someone at - it an idea of what I can do with this SMC problem?

  Make an appointment at the Apple Store - Genius Bar store for the service. If you need a Apple Store - find a store - Apple.

• 13 "mid 2012 macbook air affected by video artifacts, known problem?

  My macbook air is randomly video defects showing, screwed to the top of some parts of the screen, seems to be at the start, not so good once it heats up. It happens on the desktop, foxfire or in video games, that has happened before and after the update to el capitan. Sometimes the sections of the flash screen. Is this a known fault? is there maybe some some campaign to provide a repair? of course, my 3 years protection plan apple just expired

  I'm not aware of any program by Apple about the graphic problems with MBA.

  You can connect a monitor on the MBA and which could indicate if there is a problem of connecting GPU or display/display.

  An Apple Hardware Test could provide a clue:

  https://support.Apple.com/en-us/HT201257

  Note that AHT free error is not conclusive.

  The best option will be a date at a bar in engineering of Apple for a FREE evaluation.

  Ciao.