WiFi module does not work in win8

Similar Questions

• Toshiba common modules does not work properly

  Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

  Anyone know what this means?
  I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
  Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

  I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
  Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

  Please let us know if everything works well again.

• Wifi button does not work after upgrade to windows 7 to windows 8

  Hi all

  I use a computer hp laptop pavilion. My wifi button stopped working after the upgrade to Windows 8. I installed the latest drivers wifi but the wifi button does not work on wifi. Help, please

  Concerning

  Wandi

  Hello

  I use a hp pavilion dv6 7030ei.

  I solved the problem of my wireless button not switching not wifi enabled or disabled. My laptops wifi button now works perfectly.

  I have has been Manager of access devices, then selected, network adapters

  -Click with the right button on intel Centrino Wireless - N 2230,

  -then click on uninstall and then uninstall. Restarted my PC.

  Then bang! my wireless button started working! I don't update this driver up to what Microsoft or intel acknowledges this problem caused by the wifi drivers 8 windows and provides an updated driver that is causing the problem I encountered.

  Thank you all for your comments.

  Concerning

  One_D

• My Slideshow module does not work.

  The slideshow module does not work. It stays on a black screen, or return with a module error. Help me!

  Hi donaldwoodruff,

  Please turn off the graphics processor in the Lightroom preferences.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• L10-202: ACPI Module does not work with Linux SUSE 10

  I bought a Toshiba laptop L10-202 a few weeks ago and tried to install SUSE 10 on it. The installation went well but I have some problems with ACPI modules.
  I know that Toshiba recommends Windows XP but I have nowhere to ask for help because I could not find help on Linux forums. I should mention that I've recompiled the kernel because I considered that this was not necessarily.
  So far, the modules ACPI informs me on the temperature of the processor (57 degrees Celsius, the fan starts and at 52 degrees Celsius, it stops) and the only function that works is suspension on HARD drive. The battery level is not indicated because there is no file in/proc/acpi/battery/to read information on the battery. Except another ACPI hardware was detected by SUSE installation and works very well. I couldn't use the Toshiba_acpi module because this laptop has a Phoenix BIOS, but this isn't a big problem.

  You have an idea why ACPI does not work on SUSE and how could I solve the problem?

  Don't you think that there is no danger for the laptop to continue using SUSE, which limited the work of ACPI modules could cause damage to my laptop or it is safe to use SUSE?

  Thank you!

  Hello

  Well well, in my own opinion it s desirable that all functions of the laptop should work properly. But I put t think he might of s for laptop computer continue to use the Suse10.
  I would recommend using the other Linux distribution. That use you the Knoppix. This Linux you can stat from a CD or DVD and it works like a normal Linux operating system and you can also use the Windows XP.

  Little info on ACPI:
  With ACPI, the operating system can turn off devices, such as CD-ROM drives, when they are not in use. Another example: ACPI will enable manufacturers to produce computers that automatically turns on as soon as you touch the keyboard

  Good bye

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• Satellite A30 - Wifi PCMCIA does not work

  Hello, please help.
  I connected a PCMCIA Wifi Netgear card for wireless access. Unfortunately, even if I get all the signs that I am connected, internet Explorer will not access the internet. I checked all firewall and antivirus, etc...
  Here, I get a sign that I'm connected, but it does not work. I even get an ip address, I'm confused.
  I connect with ethernet without problem.
  I have the same problem connecting with a USB Wifi adapter, it does not connect.
  It seems that something is blocking before connection to the network card.

  Help, please.
  Kind regards
  JS

  Hello

  You have this problem just with IE or other applications like messengers?

• In 2012 LabVIEW MathScript RT module does not work

  Hi all

  I recently installed LabVIEW 2012 in my PC with Windows 7. However, Mathscript does not at all. It says "an internal error has occurred in the MathScript RT Module.  Restart LabVIEW and try again.  If the error persists, reinstall the MathScript RT Module. "I did it, but still does not work. It is said further than Mathscript is missing or not installed", but I have installed. What the problem would be, please?

  Have you been able to verify the installation and activation in the License Manager OR? It should say enabled for this computer and have a green square like this:

  

• WIFI adapter does not work and can not be detected

  Hi guys,.

  I use HP Pavilion Dv4 3106tx. I don't know what happened, but out of no where my wifi sort adapter stopped working. whenever I have activate my wifi button, bluetooth doesn't work and does not display the icon of wifi which usually shows at the bottom right of the taskbar. I also checked Device Manager > network adapters, the wifi card is not there. I also tried "Search the hardware changes", but still there is not Wifi adapter appears.

  Right now I'm just connect via ethernet for internet connection because my wifi does not work.

  Can you help me out here guys...

  Thank you!

  Hi @pooroontong

  Welcome to the Forums of HP Support!

  I understand that your wireless network is most obvious in your systray or in Device Manager. I'm happy to help you.

  The first thing to do is to take a look at this page which deals with the problem you describe. Try it and let me know if you need help most.

  Universal solution WLAN, Wireless and Wi - Fi errors

• Latitude 3440 Windows 8 Pro - option F2 WiFi toggle does not work

  Hello

  I had a brand new 3440 Latitude with Windows 8 Pro two days back. The first thing I did, as always, has been updated to the drivers after starting to use the device. Later, I noticed that the toggle WiFi option using the Fn + F2 keys does not work.

  I am able to activate wireless manually using the airplane Mode, but the Fn + F2 key combination does not work. Tried to update the driver once more, but nothing works.

  Can someone help me please on this issue?

  Thank you

  Hi shaanhaider

  Welcome to the community, we appreciate that you take the time by writing to us about your concerns with the computer. You helped eliminate me two or three steps. I would like to run you well only a little more measures to limit the problem.

  Updte kindly enforcement Quickset and the FN + F2 test work and let me know how it goes.

  Download QuickSet: http://dell.to/Sxul9x

• wifi card does not work (asus laptop computer x53e)

  Hello

  I have laptop asus x53e sx1444v with Wi - Fi card inside. It was running Windows 7 Home Premium, but something was wrong with the system, so I reinstalled it completely. After you have installed all the drivers and updates from Asus, I discovered, that the wifi does not work. I tried all the drivers on the Asus Web sites, but nothing works. In Device Manager, it is listed as a network controller, but it is listed as unknown device. If I try to install the driver, it is listed as network card, as it is, but it has the error code 10 (this device cannot start).
  When I started to live linux, the wifi adapter works withnout any problems.
  The wireless card is intel 11230bnhmw (more info printscreened http://ctrlv.cz/mJMd here). I searched for the drivers but still nothing works listed as network controller.
  I tried to put the card and plug it into another of the HP laptop, it works in linux, but the same problem under windows.
  What should I do to make it work on Windows?
  Thank you.
  (Sorry for my bad English)

  I decided to change my OS, now I am running windows 8.1 and wifi card is working automatically, withnout need to install any driver.

• Lightroom Develop Module does not work?

  My OS is version 10.11.5, I use Lightroom 5.  My module work has continued to develop.  When I move the sliders, nothing happens.  I restarted my computer, reloaded the Lightroom software and development module still does not work.

  This problem just happened.  I tried to edit several photos and results are the same, nothing happens when I move the sliders.

  What should I do next?

  Try resetting the Lightroom preferences once: How to reset preferences in Lightroom?-the Lightroom Queen

• Automatic PowerCLI loading modules does not work

  Hello world

  I am currently struggling with the function of automatic loading of the PowerShell module. Since 3 PowerShell, the PowerShell is capable of auto-loading modules. Chris Wahl wrote a nice article on it (link). I don't remember if it ever worked for me, but I can't observice this behavior on two different deployments.

  I use PowerShell 5 on Windows 8.1. I installed the latest PowerCLI 6.3. But I'm observing this also with 4 PowerShell on another client. The PowerCLI Module folder is part of my PSModulePath:

  PS C:\Users\p.terlisten > $env: PSModulePath-split ';

  C:\Users\p.terlisten\Documents\WindowsPowerShell\Modules

  C:\Program Files\WindowsPowerShell\Modules

  C:\Windows\system32\WindowsPowerShell\v1.0\Modules

  C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI\Modules

  Despite what I try: module No. PowerCLI is imported automatically. VMware PowerCLI modules are listed in the output of "Get-Module" - ListAvailable After you import VMware.VimAutomation.Core manually and any other modules are loaded automatically if used.

  Suspicion, why does not work? Thanks in advance!

  I had the same discussion, the autoload never worked until now.

  It will take a full module conversion AFAIK

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?