WiFi printer does not

Similar Questions

• After the change of username & password for wireless internet connection WiFi printer is not responding.

  Original title:

  Canon Pixma MG5200 (printer WiFi)

  I changed the username & password for my wireless connection internet and since then my WiFi printer does not respond after that I did mentioned the new configuration. I tried to reset the printer with its installation CD, but at the end of installation, I get a message that the printer is not found on the network. I also read the help manual, but I couldn't solve the problem... I really appreciate a clear explanation for having my printer answer & working again.

  Hello
   
   
  1. what exactly happens when you try to print? You receive an error message?
  2. other wireless devices work properly?
  3. what operating system is installed on the computer?
   
   
  Check if the printer is on and properly connected tour.
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Try the steps in the following article and check:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  You can also consult the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  I hope this helps!

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.

• HP photosmart 7520: printer does not print when lite blue flashes

  I just noticed recently that my printer does not print blue wifi lite flashes when the icon of the printer on my computer says printer not connected, but it's all about.  Ive tried unpluging the router, then the printer and restart the computer that gets everything back up and working, but after a while it goes back to blinking and does not print what is wrong.

  Hello

  Asuming the printer is connected wireless, a flashing blue light indicates a lost wifi connection, the pritner is disconnected from your network at the time and so it will not be printed.

  I suggest to place the printer near the router, but not less than 2 metres. too far can cause the connection to become less stable, but also too close distance due to dead radio signal problems.

  Try putting 2-3 meters to test, make sure you there are no metal objects in the path between the pritner and router (which can affect the wireless radio).

  Other that those try after the following steps to solve this kind of problem:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer/5199461/model/5199462/document/c03381908

  Plwase informed me of a difference

  Shlomi

• Wireless Canon Pixma MG5320 printer does not

  I got the Pixma MG5320 for a few years. All computers are connected by wifi. Not had any problems until yesterday. The printer is displayed in offline mode in all computers suddenly and nothing can be sent to the printer. I tried to turn the printer off and on several times. The printer itself seems fine. I did the same thing to computers. The printer does not appear in network. I use Windows 7 and Windows 10.

  Anyone know what is the problem and how to fix it? This is the problem with the wifi the printer component and is it replaceable?  I have a lot of unused cartridges. Just too lazy to replace this printer yet.

  Hello.

  If no changes have been made to network and continue to get the error offline, additional troubleshooting is required to limit the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help contact us.

• The printer does not exist or is not available to this error message. Help, please!

  Hello

  I have a photosmart C310 premium which has been working perfectly.

  It is connected to my computer via wifi. For a few days when I try to print, I get this message:

  The printer does not exist or is not available at this time.

  However, when I go to my homepage of HP printer, it prints the test page and also contacted my printer, if I want to analyze.

  Help, please!

  Thank you

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• B209a printer does not print web pages

  I'm on a photosmart B209a all in one printer with a laptop G62 220, connected with a USB cable.

  Everything worked fine until I got a new router/modem from my ISP provider but now my printer will not print web pages, it allows to print from notepad and windows live mail, was trying to solve the problem for 14 days now, running windows 7 64 bit, I was told to uninstall IE9, so now I use IE 8 Uninstall shockwave and flash player as suggested on the microsoft forum.

  My ISP server has taken over remotely from my laptop and set up wireless so I installed my aswell wireless to the printer, the problem is that he returned when he was a homegroup with my office if the printer can not go on the same network as the laptop, tried to reset to the factory settings and went out of the wireless connection shooters wrong to say this device is working properly, it prints on a very fast test page, a wireless test page it prints but so slow.

  At times it will print and other no way.

  On my home page on the file menu, the CHECK is grayed out and the homepage opens with, done, but with errors at the bottom of the page, any web site I'm going to say "you want to view only content delivered safely? and gives me the option to YES / NO, it's my book of spouses and I gave her the printer when I bought a new. In this House, we have only the laptop and the printer does not work need to a homegroup. My ISP server has made things worse x 10, my printer is no longer under warranty but the laptop is under warranty until April 28.

  My network is 192.168.1.254, my printer continually goes to 192.168.1.66 no matter what I do, I can not change, I put to the factory settings, out of the WiFi, installed and uninstalled the printer, whenever he prints a picture and congratulations to say that you have correctly installed your printer, HP told me to uninstall IE 9 because they have problems with older printers does not I bought in April 2010 so I wouldn't say that it's old.

  If anyone can suggest something to solve these problems, I would appreciate it. Thank you

  I had already followed many of the steps in the procedure you provided me with, but I have never type in folder in the start menu

  I just removed the USB cord and went to devices and printers and click on uninstall all software and drivers, then went to the control panel to ensure that it did not appear anywhere and did a reboot. the I went to HP website and downloaded the drivers and full software features and followed the instructions and did a restart, but does not yet so finally I did a system restore to where I got the new router/modem and now it prints very well.

  I think the problem is my browser as you say because in the FILE menu I still don't have the menu SAVE, it is grayed out, SAVE option YOU only.

  Do a system restore back IE 9 but the key is that the printer is now working and sweeping as it was before.

  Thanks for your time and your help, I really appreciate it.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• Hello printer does not appear in the list of IOS Printer Options

  I have a home network with a router of Time Capsule.

  I connected my Cannon MX920 wireless network.

  The printer worked very well for my MacBook Air, my iMac, my Windows laptop, 10, my iPad and my iPhone.

  There are no known pending software updates to devices.

  I connected my HP OfficeJet 6500 (E709a) for the MacBook Air via USB and it works very well.

  I installed on the portable Windows 10 Hello and I can print to the printer OfficeJet @ MacBook Air laptop Windows 10 and the iMac (and of course the MacBook Air) very well.

  In Safari / Bookmarks / Hello on the MacBook Air, ONLY the Cannon printer is listed.  The OfficeJet directly attached via the USB port does NOT appear.

  My QUESTION is how can I make the printer OfficeJet @ MacBook Air appears as option in the printer Options / recent printers of dialogue so I can print to it from my IOS devices?

  This seems to be a pretty simple configuration problem, and I don't see the need to spent $ 20 on the App Store to make it work.  I see some comments along the lines of this problem, but the solutions are quite difficult to follow and seem to depend on having the printer appear in Safari / Bookmarks / Bonjour list.

  I'll appreciate any solution (or explanation as to why it isn't a).

  Hello DevGuy,

  Thank you for reaching out to the Community Support from Apple. I know how useful it can be to have all your devices on the network with a central printer, and I'd like to help offer a glimpse into what could prevent your of you using to print to your HP 6500 iOS devices.

  In order to print from a device iOS, the printer must be connected to the same Wi - Fi network and supports the Air Print feature. After some research, it seems that the 6500 HP does not support this feature directly. You may be able to find a solution based on HP in the App Store app, but this printer does not have Air Print capacity based on support documentation, that I could find at HP.

  For more information about known printing of Air and a list of compatible printers, have look at this article: About AirPrint

  If you have any other questions, please help again. The entire community is here to help.
  -Best regards

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• My wifi network does not connect automatically

  Hi all

  im a user frustrated.

  My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

  I also deleted the list of networks do not forget and do it again. Any help?

  Much appreciated guys.

  

  create another user account and start to this account, set up a wi - fi connection and restart to this account.

  Is the same behavior?

• my printer does not work well

  MY PRINTER DOES NOT WORK WITH FIREFOX. WHAT DO I DO? THANK U

  https://support.Mozilla.org/en-us/KB/how-print-websites

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.

• I'm on a mac and my printer does not print

  I'm on a mac and it sends the document to my printer (Hp Photosmart 4680 all-in-one), but the printer does not print. My printer worked fine and now it will not print. I'm doing something wrong. This has happened once before and I am frustrated with and left for about 2 days, I had tried everything I could think of, unplug the unit for an hour or more, uninstalling and reinstalling, checked ink levels they were very good. Then all of a sudden, he started working again. I turned on my computer and the printer, and surprisingly it comes to start printing. Does anyone else have this problem? If so what do you have? Or someone has any suggestions of what I can hurt!

  Thank you

  Make sure that your OS X is healthy:
  
  1. download and install OS X Combo Update.
  2. download and install the printer driversHP from Apple.
  
  Finally, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page (if you want).

  Do not connect your printer via a USB hub, connect directly to your Mac.