Wiggle of the multiple layers

Similar Questions

• Change the multiple layers at the same time

  Hi all
  Is it possible to change the position of the multiple layers at the same time? that is to say: I've got a slideshow made with several layers (probably about 60) while back and now I need to re use it in a different size (smaller). When I just resize the document, my slide is no longer in the center of it and is bigger. I would like to: 1. change its position within the document. 2 reduce entire layer together. If 2 is not possible, fine, but to me, there may be a way to change its position. Thank you much for the help!

  If you look at the area where Flash displays your frames per second is a small button (it looks like 2 boxes blu - ish overlapping). It is the button "edit multiple layers. Once you press this, you will see a marker on your time line asking you to select the images to change. Stretch this segment to cover all the images you want to include in your editing - lock all layers you want to include in your installation. Then, you can press Ctrl + a to 'select all' - this will only select executives in "onion" and unlocked frames - from there, any changes will not affect what is selected. You have to play with how it works because it can be a little difficult to understand (when it comes to points of alignment and balance, etc.). I would like to make a copy of your flash document to test this point until understand you before you start your original edition.

• How to get the multiple layers of data

  Hello

  I imported two jpg files into a single composition. Please follow this procedure...

  1 created a composition, say his name testCompo

  2 imported a file1.jpg in the file-> Import-> file draft

  3 imported a file2.jpg in the file-> Import-> file draft

  4. drag the two files, file1.jpg and file2.jpg, in the testCompo

  Now, I have two layers (it is file1.jpg and nested are file2.jpg) in my testCompo. How can I get the information in pixels or pixel data of the

  the two images (IE, I mean layers).

  I knew that params [0]-> u.ld is the first data layer in

  () EntryPointFunc
  PF_Cmd cmd,
  PF_InData * in_data,
  PF_OutData * out_data,.
  PF_ParamDef * params [],.
  PF_LayerDef * output,
  void * extra)

  So what about other data layer? Then, finally how can we get the multiple images/layers data in AE?

  Thanks in advance!

  It's the thing.

  You must have a param layer (let's say it's param number 3).

  Use this param to select any layer of the model.

  Now you checkout param 3.

  what you get is a paramDef structure containing the pixels of the layer 3 Advanced param to.

  you will find this information at:

  paramDef-> u.ld.data (or something close to that. I do not have in front of me)

  This way the jpg1 affect can get jpg2 pixels and jpg3. any layer in the comp.

• Script request to toggle the visibility of the multiple layers using regex

  Hello

  I did a ton of research, trail / error and need to reach out for help.

  I'm trying to create a PS script that activates / deactivates the visibility of the layers AND groups based on a regular expression in a PS document.

  EXAMPLE GROUP PS & LAYERS STRUCTURE

  =======================================

  • / / example

  • header

  -some layers

  -/ / test

  • footer

  -another layer

  -/ / content area

  Bullet = group

  Hyphen = layer

  
  

  This script should hide the two "/ / example", "/ / test ', and ' / / content area ' on track. Ideally, the script would reveal these layers and groups.
  

  
  

  I managed to find two scripts that make each half of the result you want below.

  Part 1: Use of regular expressions to locate each layer and the Group (I changed the reg exp for use cases):

  Re: Script to search for layer names

  by: Michael L Hale

  var re = /-/-/. * / ; corresponds to a reg exp var = collectNamesAM (re); Download the table of correspondence of layer indexes for (var l = 0; l < matches.length; l ++) {makeActiveByIndex (matches [t], false);   do something with layer alert (app.activeDocument.activeLayer.name); } / / next match if no function collectNamesAM (re) {var allLayers = new Array();   var startLoop = number (! hasBackground());   var endLoop = getNumberOfLayer();   for (var l = startLoop; l < endLoop; l ++) {if (! isValidActiveLayer (l)) {l ++;}}   } If (match (re) getLayerNameByIndex (l)! = null) {allLayers.push (l);   allLayers return}}; }; / * / / / / / Function: getActiveLayerIndex / / Description: Gets Gets the index of the Action Manager API / / to activeLayer corrected for background layer / / use: var idx = getActiveLayerIndex();  Entry: No / / Return: number - correct AM itemIndex / / Dependices: hasBackground / / / * / function getActiveLayerIndex() {var Ref = new ActionReference();   ref.putProperty (1349677170, 1232366921);   ref.putEnumerated (1283027488, 1332896878, 1416783732);   var RES = executeActionGet (Ref) .getInteger (1232366921) - number (hasBackground()).   RES IS 4? RES ++: res / / why the skip in this doc?    return res; } / * / / / / / Function: (isValidActiveLayer) / / Description: LayerSection checks for the "real" layers / / use: if (isValidActiveLayer()) / / entry: no / / return: Boolean - True if this is the end of a game / / Notes: not necessary if the layer has been made active / / using the Action Manager API / / / * / function isValidActiveLayer (idx) {var propName = stringIDToTypeID ("layerSection"); / / cannot replace var ref = new ActionReference();}   ref.putProperty (1349677170, propName); TypeID to "Rprp" / / "Lyr", idx ref.putIndex (1283027488, idx); ""   var / / desc = executeActionGet (ref);   type var = desc.getEnumerationValue (propName);   var RES = typeIDToStringID (type);   return res == "layerSectionEnd"? false: true; }; / * / / / / / Function: hasBackground / / Description: bottom layer using AM API Test / / use: if (hasBackground());  Entry: No / / return: Boolean - true if a background layer doc / / Notes: requires that the document be active / / DOM: App.Document.backgroundLayer / / / * / function hasBackground() {var res = undefined;   try {var Ref = new ActionReference();   ref.putProperty (1349677170, 1315774496);   ref.putIndex (1283027488, 0);   executeActionGet (ref) .getString (1315774496);   RES = true;   } catch (e) {res = false} return res; }; function makeActiveByIndex (idx, forceVisible) {try {var desc = new ActionDescriptor();}   Var ref = new ActionReference();   ref.putIndex (charIDToTypeID ("Lyr"), idx) desc.putReference (charIDToTypeID ("null"), ref);   desc.putBoolean (charIDToTypeID ("MKV"), forceVisible);   executeAction (charIDToTypeID ("TPCV"), desc, DialogModes.NO);   } catch (e) {return-1 ;}} ; function getNumberOfLayer() {var Ref = new ActionReference();   ref.putEnumerated (charIDToTypeID ("Dcmn"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));   var / / desc = executeActionGet (ref);   var numberOfLayer = desc.getInteger (charIDToTypeID ("NmbL"));   Return numberOfLayer; }; function getLayerNameByIndex (idx) {var Ref = new ActionReference();   ref.putProperty (charIDToTypeID ("Rprp"), charIDToTypeID ("Nm"));   ref.putIndex (charIDToTypeID ("Lyr"), idx);   Return executeActionGet (Ref) .getString (charIDToTypeID ("Nm")) ;} ;

  This script shows an alert for each layer / group name that corresponds to-is to find the layers / groups!

  Now I need the layers / groups to simultaneously show or hide depending on their status.

  
  

  I found a script that toggles the visibility of a specific name (in this case "GRID") here:

  Photoshop-grid-enable/disable/turn Grid.jsx to master · squarefrog/photoshop-grid-toggle · GitHub

  var gridName = "GRID"; Implement what you call your grid layer together. function toggleGridLayer() {if (app.documents.length > 0) {var gridLayer = app.activeDocument.layerSets.getByName (gridName);}}         gridLayer.visible =! gridLayer.visible;     toggleGridLayer()}};

  Essentially, I want to merge the tilting head of visibility script in the script of the regular expression. Any help would be great. Thanks in advance!

  
  

  Note: The use of CC PS 2015
  

  This script is all on one line and hard to see where are the separate lines. If you want the code to turn on or off a layer, you can use:

  var docLayer = app.activeDocument.activeLayer;
  docLayer.visible=docLayer.visible==false;
  

• The multiple layers activation or deactivation

  Does anyone know if there is a way to turn several layers on or off massively in Illustrator CC?

  I thought that to see a video demonstration of this at some point. Select the desired layer names and use a combination of shortcut keys - or something like that.

  Thank you

  Don

  while now the key shift-keys ALT...

  Just Alt/Option, no need to change.

• masking of the multiple layers with a mask

  Is it possible to do?

  When I place the template files to tell... thumbnail images with rounded corners and a drop shadow, I preffer to proceed in the way that Photshop and imagready allow you to do > creat a form and use it to hide any layers above it. That way if I chose to do one or two pixels wide, I've just made it to the mask layer and resave the tumbnails outside. As far as I can tell made Fireworks you create a different mask for each layer, so you'd have to change it in each layer... not the best workflow!

  Thanks for any help on this.

  for me it's using 1 layer mask with 1

  a symbol that contains several layers of images. I can spend the layers to display the active image, I want to show

  Benefits

  1. use only 1 layer mask

  2 can group images into a symbol

  3. can you share other sets of images as symbols

  4. can I apply effects to the mask layer either STROKE / shadows

  I hope that this workflow can also help you

• Photoshop CC Auto-possibilite select the hidden layers

  Hi, I am not sure if this is a bug or what... When I click on and drag with the move of the automatic selection of the multiple layers tool, it will not select only the layers that I wanted, but also layers hidden in the same area of my selection (or at least, layers, which are in the hidden groups).

  For example, say I have a layer group. I duplicate the group, and then make the original group invisible so that I can create an alternative version. When I clock and drag to select the objects in the new group, the (hidden) in the former group objects get selected as well, so I'm obliged to selection click on every article I want to change... forever.

  This is different from all previous versions of PS and a big trouble.

  If someone else can confirm this bug, or is it just me? Or not consider you this as a bug? I see some specific cases where it can be useful, but I would like to control this behavior as a preferece. Maybe there is already a preference for this problem and I just have not found. Any comments would be more useful

  See you soon,.

  Cory

  Discussing this bug here:

  http://forums.Adobe.com/message/5423270#5423270

• straighten multiple layers at once with the ruler tool

  Is it possible to use the ruler tool and straighten multiple layers that require the same correction in both?

  One or both them and make all at once.

  

• Can someone tell me how to show/hide multiple layers at the same time?

  Hello

  Can someone show me how to make more than one layer visible or invisible, without having to click on each separate layer? -J' have more than 100 layers in a drawing, and it is very tedious to have to click on each individual layer to hide it or show it. I just started using Photoshop elements 13, on an iMac

  Thanks for any advice.

  You can Option , click on the eye next to the thumbnail icon of the layer to hide all selected layers, but.

  Option , click New to display all layers.

  Order click to change the visibility of the selected layer switch

  To hide multiple layers, select the layers, right-click on one of the eyes, and click hide this layer

  Repeat to repeat the visible layers.

  You can also click on one of the eyes and then drag down or to hide layers and invert to make the visible layers.

• clone on multiple layers/images at the same time stamp

  Hello world

  I would like to know wheter that someone knows a way or workaround to use brush/clone stamp on several layers or images at once.

  For days, I read in the forums on this topic, but couldn't find a solution. Actions do not work because they do not record the brush strokes. I even tried a mouse recorder, but the free one I downloaded the fact only save the position of the click and release of mouse, turning each curve in a straight line.

  Any thoughts/ideas?

  I am not clear why I can not find a function to brush/stamp/slather on all selected layers.

  Thank you and best regards,

  Martin

  Edit: sry probably should have posted in Photoshop Windows

  One solution is to use a multichannel file and after clone stamping re - convert these channels to their own place in the RGB layers.

  I did once a Script for that, but it was only for use on solid layers, like transparency issues would be a bit too much for me.

• drag multiple layers from one document to another

  When I drag multiple layers from one document to another, now the keys ctrl-shift-alt (that is placed exactly in the same place) Photoshop changes the selected layers. He eithers add a leyer or just pass.

  He wants me to drag a segment of the leyer where there is 'information' or pixels.

  I drag in the document itself, not the layerpanel.

  In previous versions, it wasn't like that.

  Sometimes there is a very little information or pixels in a layer. This is way hard to aim straight for photoshop to do what I want it to do.

  I don't know if it's done on purpose or it is a very annoying bug.

  Photoshop 20151114.r.301x64

  win10 64-bit x 64-proc

  Intel i7 - 4770 s 3.1 GHz

  24 GB RAM

  SSD

  Well, it is quit interesting: while we are working on this problem, I advised a new update for photoshop: some problems occurred with the last update.

  I was working with 20151114.r.301

  And now I have the 20151209.r.327 version (which comes in fact in a few minutes ago)

  I tried the same thing as above and now my problem with the sliding of the layers went!

  So it was a bug. Nothing to do with the settings or anything.

• How to export multiple layers to separate PDF files?

  I just upgraded from Mavericks to Yosemite and all my CC Adobe until 2015. So far I love it, but I have a nagging problem: export layers to separate PDF files.

  My file has 38 layers, each of them must be separated in PDF format, so I use the script that is embedded in SaveDocsAsPDFs. The first time I run it, it ends up split on most files, but not all, so I thought I'd run it once again: no chance. Whenever I run the present, he eventually put all the active layers in a pdf from single page instead of save them as individual PDF files. I've spent the better part of two hours online hunting and are all I can find third-party scripts that actually do what I need, rather than use the builtin scripts.

  Is there a way someone can help me with this problem? I'll have much, much more files like that and I would use the original if possible script. It is everything on a Mac. Specs below.

  Mac Pro

  Quad-Core Intel Xeon

  3.2 GHz

  32 GB

  The SaveDocsAsPDFs allows to save multiple documents open simultaneously in artificial intelligence to separate files. He doesn't have layers in separate documents. You can use one of the scripts that you got to do what you want.

• How to connect an adjustment with only the specific layers Layer?

  I tried to understand this, but I had no luck, I have a top 9 layers adjustment layer, but I just want to that it effect 5 of these layers.

  It is not possible.

  An adjustment layer applies for the determination of the underlying layers.

  If you want to apply the same effect to multiple layers, but not all under a certain point in the stack of layers, then consider using a single layer of master in the control bodies of this effect on the other layers, with bodies related through expressions. It is precisely for this reason that the copy with Property Links function was created.

• Hide multiple layers in 3D?

  I have a comp which is essentially a map projection with several slices of an old photo of a House stuck on images of the House that I filmed.  I used tracker camera 3D NULL values to place them in space.  Does make sense so far?   But now, I have a problem where I would hide all the layers at the same time pen out and do consider smooth on the edges.  For some reason, the mask sticks just the images I shot initially and layers in 3D.  Tracker mask is good except that you cannot change the path at all once it is followed because it uses data points to mask path as Tracker mask points.

  I tried precomping, but he has not made a difference.  Which means, I precomped all layers and then tried to mask/feather as a single unit.  Did not work.

  My goal is to have a mask to stick at home and have the kind of mask of morph in the clip.  The rest of the project to the other shots was easy.  Only, I had a photograph for each shot.  I have followed 3D clip, is a null value, which is attached to a point of Tracker, copied the position that NULL to the photo and then adjusted the picture up to what he did.  It works like a charm.  But, when I take a model of pre of several layers that something goes wrong.

  Is there anything I can try?   Check out the photos.  The photo of the top is one I'm trying to figure. It's a glidecam turned the cap towards the House.  The 3D tracker works very well on images for all the clips.  The bottom two are pans simple tripod.  When the camera moves essentially, the mask turns and changes shape in a sort of bio of passage.  I want to achieve for the top of the master page.

  Thank you!!

  

  

  

  Here's what you have to do. First of all, make sure that you do not have the Ray-traced rendering engine turned on. Second, your multiple layers composing them. Third transformation of the collapse. Fourth, add a new layer 3D by using a solid red or blue with the screen blend mode and position this layer so that it will cover the whole value demo. Gold and this is the reason for the screen blend mode, use the tool pen to draw your mask on the layer, and then set the layer as a track matte for the demo. animate the matte and you're done.

• How to brush across multiple layers

  Good afternoon

  I have several layers that are all the same size I want to use a brush everywhere at the same time - and yet whenever I select several layers the brush and pen tool me don't give a sign of «» Anyone know an easy solution? I just want to sign my name through several images at once - I'm guessing a bit like a watermark. With the help of CS6 creative cloud on Windows.

  Hello! Solution of Howard, I would add that it is not possible, as you have noticed, to apply a brush stroke to multiple layers.

  You can use the keys ALT + [shortcut key to go to the next layer to the bottom of the stack.

  If you have too many documents, the creation of an action can be a way forward.

  (I guess you stacked layers in the same document, to be able to export to a gallery?)