PCI network on Equium A100-549 controller resource conflict

Similar Questions

• Equium A100-549: UK keyboard button game problem using OS language NL

  Hi all

  I have a bit of a problem, I can not solve my self.
  I have a toshiba Equium A100 549 and changed operating system from XP home to XP home NL UK.
  I did format all HARD disks because of Mayor virus problems.

  I reinstalled all the cd drivers Toshiba but stil some of the keys on the keyboard do not work good...
  I noticed that some of the keys are on different locations like on a Dutch keyboard.

  I woul want to set them like they belong on the way in which toshiba set them, with the same 3min.from on the keys...

  What do I do? Thanks in advance,

  Michel Hoff,
  Holland

  > I reinstalled all the cd drivers Toshiba but stil some of the keys on the keyboard do not work good...
  > I noticed that some of the keys are on different locations like on a Dutch keyboard.

  The point is that you have installed windows OS in the language of the Netherlands, but the laptop uses the UK keyboard layout.
  Therefore, change to a different language keyboard layout if the keyboard is set to the language of the Netherlands, then you should change this to English UK!

  Go to control panel-> regional and Language Options-> languages-> text services and input languages tab, click details

  There you can add or change the language

• After update to 2 x 1 GB memory Equium A100-549 usually start

  Hello

  I use the Toshiba laptop with the following specs:
  Equium A100-549
  Part number: PSAA4E-00100MAV
  CPU: Processor Intel® Celeron® M 360
  OS: Windows® XP Home Edition
  HARD drive: 40 GB hard drive
  Memory: 1 024 (512 + 512) MB of RAM DDR2 2 x Samsung 512 MB 2Rx16 PC2-4200 s-444-12-A3 KR M470T6554CZ3 - C05

  Description of the problem:
  =================
  Laptop does not start after upgrading memory to the memory modules Ram 2 x 1 GB.
  I checked Toshiba support on the side of the specifications of my laptop (http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UKPRODUCT_ID=11 3699)

  possible to update max, 2 x 1 GB Ram from 2 GB memory. I bought a new www.MrMemory.co.uk 2 x HYS242641GBQE 1 GB PC2-4200 SODIMM 64 x 16.

  Result after power is turned on with the new memory:
  ==================================
  CONDUIT of the TAB + F10, F11 buttons blink, it goes on twice after the laptop computer powers off.

  Test cross
  ========
  -try the module memory only one to start with.
  -tried to put memory on the second plug memory with new memory, cause
  problem persist buttons Flash until power off.
  -tried with a memory of Samsung and more a new module of memory together, computer laptop result begins, however he will show me properties 960 MB instead 1536 MB. Need help, please give me any suggestions or advise how to use the new memorys in 2 GB total.

  Thank you for your help in advance

  Kind regards

  Mesut

  Yes. It is possible to upgrade your Equium up to 2 GB, but you must use compatible memory modules.
  Module 1 GB compatible for your old Equium has PA3411U-1M1G part number.

  Check it out.

• Equium A100-549 - reading disc error occurred press ctrl + alt + delete to restart

  Hello

  I have a laptop Toshiba Equium a100-549, about 3 years, Windows XP Home Edition.
  Everything worked very well so far. When starting my computer, I received the message:

  A disk read error occurred press ctrl + alt + delete
  I don't want to lose my data

  Please please I need some advice what to do

  Kind regards
  AGM

  > I don't want to lose my data

  Well. Everyone knows that a HARD disk problem can happen and all of a sudden you may lose all the data stored on the HARD drive.
  That is why it s always recommended to backup the data on additional HDD, DVD, etc.

  I'm not sure if this will help but try this:
  Try to boot from the disk Win XP (NOT the Toshiba Recovery disk) and press r. means repair and should start the repair console.
  The similar DOS window should open and there, you can use a command:
  CHKDSK drive/p/r

  The chkdsk command checks the specified drive and repairs or recovers the drive if the drive requires it.

  More details can be found here:
  http://support.Microsoft.com/kb/314058

  If that does not help, then you need to reinstall new OS.

• Equium A100-549 4 GB memory?

  Hello

  I have a Tosh Equium A100 - 549 (PSAA4E). It's getting a little old now, but still a good machine, I've read various reports on what is max memory to this laptop.

  I bought 2 x 2 GB 200 pin SODIMM PC2-5300 (667), but when I install the laptop does not start. I get the power and keyboard LED and the fan but not the screen output.

  If I mix a former modules with a new 2 GB 512 MB (in order any Bank) then the laptop works, even if I get only 1.87 GB display in XP Home Ed.

  Took me to update to the latest version of the BIOS but still the same thing.

  Is it more a case of 2 GB not supported or is it the speed? I need 2 x 2 GB PC2 - 4200?

  Thanx

  Hi mate,

  the machine does not support the def. more than 2 GB of RAM. You must use no to 667 and 533 Mhz modules.

  That's all ;)

  Welcome them

• Can I replace the graphics card on Equium A100-549

  Hi, I bought a game on Saturday, or a simulation game, I got one installed on my laptop.
  The game ran very slow so I removed the programs, a clip which I don't use pictures, one has tried it yet once one was still chance?

  I looked on the web one found that the game runs slowly on my card reader.

  Can I get a new graphics card for my laptop?

  The card I have is ATI RADEON XPRESS 200 M SERIES, one lap top is an Equium A100-549? can anyone help thanks chris

  No, the graphics card can be replaced on laptops.
  Especially the GPU chip is soldered on the motherboard.

  Welcome them

• Equium A100-549: DVD & CD playback is slow and jerky

  Hello!
  DVD and CD playback is jerky and slow (sound and image). This problem occurred out of the blue! One day was playing very well and the next, when we tried to play a DVD is a different problem. I put the other DVD that plays very well the night before, but without success - it wasn't the DVD in particular. I tried the audio CD I played before and to my disappointment the same problem. I ripped a CD on my laptop and it played very well - it is not the sound card. I used a lens cleaner, but it did not work.

  I run Toshiba Diagnostics, no problem. I even scanned the HD and defrag, nothing - so I doubt there is a problem with Windows. Problem with two media players, windows one and the Nero one - is not due to lack of players. I drop the phone or hit him or spilled something on it. And this problem really happened from one day to the other. I had all the windows and driver updates two weeks before the problem occurred, by paying in the meantime several DVDs and a few CDs with no problems. What should I do?

  Fortunately, the laptop is still under warranty, but I would prefer if there is a way to fix at home, because services of take time...

  Laptop: Equium A100-549 CM360
  Windows XP
  Matsita DVD Ram UJ841S

  Thank you for your help.
  Vasilis

  Hello

  I hope that your device to factory settings and not your own installation of the OS. You didn't write what CDs and DVDs you use, but I hope that use you the original one.

  Before you play DVD movie try at first to end all unnecessary process and stop the antivirus application if you have one. RedHawk is just, but I'm sure that DMA setting is standard by factory settings.

• Satellite P30 - PCI network controller resource conflict

  At the start, I have a message "resource conflict - PCI slot 03 Bus network controller: 02, device: 02, function: 00 press F1 to RESUME F2 to Setup.

  If I choose to resume, boot Windows XP starts but stucks in the process. I can boot Windows Mode safe mode without network only. I tried to reinstall the NIC drivers and restore the system, but it had no effect.

  How can I solve this problem?

  Hello

  The resource conflict appears generally if any 3rd device is already using the same resources of laptops.
  The installed Windows operating system must control everything and it is not necessary to assign resources manually. After installing the driver everything should run automatically

  I don't know why it happens, but in such case, the new OS installation m would be desirable.
  Try to back up all your important data and reinstall the OS with all the important drivers Toshiba.

  Don t forget to report your results

  Concerning

• Wireless network does not work properly on Equium A100-549

  I've tried so far with/without WPA PSK TKIP, WEP, OPEN, dynamic and static address, ipconfig/all configure TCP/IP manually and automatically updated drivers, all windows updates. I also tried with or without mac filtering.

  I install a good USB dongle known and tried all the foregoing the same I can instantly find the network cut and paste the password or type it in, it find instantly and the other around the street, but could not connect wireless connections, the icon in the task bar permanently a red x.

  If I can connect to the network I can put everything up. I have an XP, Office XP laptop and Vista DESKTOP base everything on laptop wireless WIFI on board, to an office on a dongle and the other with a PCI x 16 WI - FI card. on the laptop problem when you right-click the icon under display all connections, the status option is also low lit (can not select).
  It's like the driver is bad even if tosiba website says it's the right one to download when you fill out the form online, when you are looking there Web site for pilots.
  It's really annoying.

  Hello

  Satellite A100-549 PSAA4E was delivered with Atheros 11 b/g wireless network card.
  In this case the Atheros WLan client utility should be preinstalled on this OS.
  I advise to use this tool to configure WLan settings.

  In addition the wireless network card has been configured and set WLan channel 11. Please check if your router has been also on channel 11!

  I assume you are using the image of preinstalled Toshiba.
  This image contains the right WLan driver and usually the new installation is not necessary but if you are lloking for the new WLan driver I would recommend take a look here on this Toshiba WLan Center Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Good bye

• Re: Need to WXP for Equium A100 ethernet controller

  I reloaded Xp which solved a problem of sound. Now, I can't connect to internet because I don't have the driver for ethernet controller. I spent several hours trying to find this driver but my search always ends up in a dead end.

  Toshiba does not list the driver on the download page, and I don't know what to do. Any ideas guys?

  There are three models of Equium A100. Please post model number short and we can check it for you.
  Otherwise, check out the download page of Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and I m you can find here.

  It is old model so less product type choose Archive.

• Tecra A7 PTA71E: Bus of serial controller resource conflict PCI on motherboard

  Hello

  Sorry for my English.

  I have a problem with this laptop Tecra A7 PTA71E 00D00DSP. One of my clients transported this laptop with the next serial number.
  When you turn on the laptop, before windows login, seems that three consecutive messages:

  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:01
  Resource conflict - PCI on the motherboard mass storage controller.
  BUS ERROR: 07 device: function: 06, 02
  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:03

  I changed the RAM, hd, eating, with the same result.
  If you come in the bios and save the changes with the best configuration or default installation, the result is the same. I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard. I hope it 'sn' t true and you, the experts of the toshiba, might help me find or tell an alternative, because I think my client won't like the motherboard, because it is usually too expensive.

  Who is King
  Mikel Pastor

  Hello

  > I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard.
  I doubt s typical error for Toshiba laptop.
  According to this error message, there is something wrong with PCI devices on the motherboard, and this error may happen to any laptops from different manufacturers it typical error of s which is related to the question of the motherboard.

  According to me, there is no much to do you'll need a new motherboard.

• Equium A100-549 - no sound

  Hello

  I have a PC laptop toshiba satellite A100-549 and I have no sound.
  I had her about a months ago, when I had AVG anti-virus installed then when I opted for a new anti-virus and the noise disappeared.

  Unfortunately, I didn't have the system restore lights so I can reset my previous settings.

  I lived all the usual checks via the control panel and installation of a new driver audio Realtek hd and still nothing.
  All my settings are good with no yellow exclamation point.

  I hope you can help

  See you soon
  Mark

  Hello

  Which Windows operating system you are using?
  The latest Realtek High Definition Audio driver can be downloaded from the page of the Realtek driver. I think you should check the latest driver.

  In addition, you must follow this installation instruction:

  _Setup driver in first time: _

  Step 1. Before installing the Realtek HD Audio drivers, press the Cancel button if Windows detect the multimedia Audio device.

  Step 2. Go to the "Realtek HD Audio Driver" and run the setup.exe program to complete the installation.

  Step 3. Click next/OK/OK to proceed. If the Windows context menu "Digital Signature not found" message, press Yes to continue the installation.

  Step 4. Finally, select to restart the system and press [finish] to complete the installation.

  The system will reload the drivers and make some adjustments in the INF file if necessary.

  Deep delete the driver follow this: _

  Step 1. Go to Start\Settings\Control Panel.

  Step 2. Select the Add/Remove Programs icon.

  Step 3. Select "Realtek HD Audio Drivers" and press the Change/Remove button.

  Step 4. Click next/OK/OK to complete the uninstall.

  Step 5. At the end of the procedure, select to restart the system, and then press Finish to complete the uninstall.

  PS: before install you the new Realtek driver, delete the old system!

• Equium A100-549 restoration

  I got a laptop Satellite A100-549. To get it working again, I need to do a complete reset to factory settings. Unfortunately there is no software on the laptop recovery and there is no recovery discs. How can I get a set of recovery discs?

  I fear that you will not be able to order recovery disks original for this model of laptop old m.
  What you can do is to install the clean version of the OS.
  All the necessary drivers, tools and utilities for all operating systems supported, you can find on http://www.toshiba.eu/innovation/download_drivers_bios.jsp

• Where can I get a recovery for Equium A100-549 media

  I need help please, I bought an A100-549 on internet, it did not come with any recovery media.
  He has now a virus is serious and I need to restore it. Where can I get a recovery media for my laptop?

  See you soon

  Perfecto

  Hello

  where did you bought it? On Ebay? If Yes, then you must contact the person who sold you the unit. If you don't have any chance to get this collection, you should communicate with a
  ASP local in order to get a recovery.
  If Don t you want to get a recovery, and you have a genuine copy of Windows that hang out, then install, download the appropriate drivers for that machine on toshiba website and install
  them afterwards that you have windows installed.

  Welcome them

• Equium A100-549: Question about upgrade HARD drive

  Hello
  I'm looking to upgrade the hard drive on my A100-549 that 40 GB is not enough.

  Anyone know what kind of car I need to buy?

  Looked at Ebuyer and there is some Toshiba 2.5 "hard drives, but want to make sure that I have buy one that will be compatiable with my laptop.

  Any ideas?

  See you soon

  Hello

  In my opinion, you need the HARD drive with Serial ATA interface and you can use 40/60/80/100/120 GB hard drives.