Wiggle returns values changed by an amount greater than amplitude setting

Similar Questions

• ORA-22813: value of the operand is greater than the limits of the system

  Hello
  for small query
  
  SQL > select COMPLETION_TIME from RC_BACKUP_FILES WHERE ROWNUM < 2;
  
  I get
  
  ORA-22813: value of the operand is greater than the limits of the system
  
  It seems starnge to me, you know?
  
  I have a great value operand?
  
  Thanks for help.

  The Version could help here

  might be a bug

• Find the minimum value in digital array that is greater than 0

  So far I have;

  $pfpp = min ($pflist);

  $pflist is the array of digital values and contains about 0.

  I need to change to $pfpp = min ($pflist); to return the lowest number which is greater than zero.

  I am stuck, can anyone help?

  Thank you

  Change the values in the table so I can't sort them in ascending order.

  Of course you can.  Or you can copy the table into a temporary array.

  $temp = $pflist;

  sort ($temp, SORT_NUMERIC)

  foreach ($temp as $value) {}

  If $value > 0; $number = $value; break;

  }

  echo "entry of zero smaller in pflist is $number";

• How to create a default profile for all users of a computer under Windows 7/Vista for Firefox versions greater than 8? I would that all new users on a computer to get the same values by default, homepage, bookmarks, etc...

  I found some help on older versions of Firefox, but I can't seem to find anything for the latest versions greater than 8. There must be a way to do this for imaging large scale.

  Have you created a defaults\profile in the folder of the program Firefox (C:\Program Files\Mozilla Firefox\)?

  All files in this folder will be moved into each newly created profile folder.

  To give the prefs a default, it is best to do this via a mozilla.cfg file.

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.
  
  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

• Use the return value to do step digital multiple success or failure

  Hello

  I use a multiple digital step to check several measurements by an external DMM through a function created in CVI.  I would like to use the return value of the function to replace the global status of the step. The reason is that the return value indicates a communication error, while steps are being taken, and which would lead to a "fake" fake or false 'Pass '.

  What I would do is more or less this >

  If the return value is 0, then check if the measuremets are between the limits

  If return value! 0 = there was a communication error so step continues to operate independently of the measure.

  I tried combining multiple digital step with a step of pass/fail, but it does not work.

  I also trie to change the expression of the status of the multiple digital steps but basically ignores him.

  Any ideas?

  Thank you

  Javier

  Why don't you just make that return the value limits for multiple numerical limit stage.  Comparison of the EQ value and the low limit to 0.

  That would make the most sense.

• How to reset a while loop based on a value change event?

  Hi all

  I work in a labview program that sends voltage to a laptop via USB 6008, tension is amplified by an op-amp, and then he comes back in the laptop. I created a program and a working circuit, but my current challenge is how to reset the average of the values of voltage coming into the laptop, after that the user changes the digital control (which controls the output voltage). In other words, I need to be able to reset the number of iteration and the sum to 0 each time this happens.

  I looked upward to reset the counters of iteration through shift registers, but I'm not sure it will work in this case, but I'm also not sure how to reset the sum of an array (if possible). I have spent a lot of time to read these forums and tutorials from various sites, so I think it can be done with the correct nesting of the case structures, structures of the event and while loops, but I don't know how. I am new to LV, just started to learn in mid-January, so any help is appreciated.

  Thanks in advance,

  Graeme

  You just need the structure of single event with the bargains.  Use the case of timeout to get your new values and find the average (100ms timeout value and get rid of the wait function (ms)).  Keep the amount and the number of items in the shift registers.  Wire these values through each case of the event.  In the event of changing the value: control, just set the values to 0.  Then add a Stop button value change event to stop your program.

  

  

• Read byte with a value up to 127 lire byte with an ASCII value greater than 7F (127 dec)

  Hello

  I have to read a byte with a value greater than 127, Labview turn 27.

  In help I saw that Labview provides a description of ASCII that pour values ranging up to ' 127.

  What do I need to do?

  LabVIEW 6.1

  Windows XP

  Hello

  I want to read a byte with a maximum value of 127, but Labiew reurn arround 27 value

  How do I do?

  

  Rigid wrote:

  Thanks for your help. I'm not changing lyke I understand (my English is poor quiet...)

  I have another program that communicate with the instrument. I know byte (6) must be greater than 18 (greater than 7F actually).

  But with Labview, I'm only 18.

  While it might be higher than 18 x, an I8 is signed, and therefore it cannot be greater than x7F - it has a range of-128 to 127. A U8 is not signed, and it's why he has a range from 0 to xFF. However, x 18 is the same if you treat as signed or not signed. I don't see how LabVIEW can read a wrong value on the serial port. Are you sure you're looking at the correct byte? Your code shows that you split the chain twice. Are you sure that you do this properly?

  Given that you use on Windows you can recheck the chain received using PortMon. Allows you to see what is actually received by the driver for the serial port on Windows.

  P.S. I actually meant the whole byte function.

• Possibility to get a popup to display the display value "" and not the "return value".

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  Concerning

  Ben

  Benton says:

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  See limiting the number of values in a LOV

  If it comes to a page element, and then change the type of Popup LOV key.

  If there is a control in a table, it's another reason to upgrade to a supported version, or the tabular form will need to be converted to be manually generated and processed in order to allow the appropriate control be returned using the apex_item.popupkey_from_lov method

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• The list of values - return value identical to the display value

  I fill a selection list with the names of the members with a lov sql like the following

  < tt > select memberName d, r FROM whateverTable < /tt > memberId

  The problem is that in the database, the stored value is the Member ID. I really want the real memberName stored in the database instead I want to use this name of Member elsewhere in my application.

  When the integrated trigger executes its code

  < tt >

     if NVL (:old. CONTACT_PERSON,'0') ! = NVL (:new. CONTACT_PERSON,'0'( ) then

  Insert into eba_ca_history ()table_name component_rowkey COMPONENT_ID column_name old_value new_value) values

         ('EVENTS', :new.row_key, :new.event_id, 'EVENT_OWNER',:old. CONTACT_PERSON,:new. CONTACT_PERSON()

     end if ;

  < /tt >

  
  

  I get the following text shows on my apps update page-"owner of an event has changed from 457879885611315631565 to 2546454654546546546546..."

  

  I want the value of the actual display to display for an update instead of the return value.

  
  

  I tried to convert the value to help

  

  
  

  But which causes the following error

  
  

  

  
  

  How can I make sure that the return value of the lov being stored in the database matches the display value for the lov?
  

  Hi Richie,

  If I understand your request, simply set your LOV query with the same column like screen and return:

  select memberName as display_value, memberName as return_value FROM whateverTable
  

  If this isn't what you're asking, I apologize for the misunderstanding.

  Thank you

  Erick

• Display a value in the column only if the number is greater than 1

  I need to return a value in the only if column the the count is greater than 1 for the same column.

  Example table:

  FOOD_TYPE	Agenda	COST_TO_BUY	SELL_PRICE
  Ice cream	Chocolate	0.50	2.00
  Ice cream	Vanilla	0.50	2.00
  Ice cream	Strawberry	0.50	2.00
  Chicken	Wings	2.00	5.00
  Bovine meat	Steaks	8.00	15 h 00
  Bovine meat	Roast	10 h 00	6:00 pm

  In this example, I want to choose the POINT of FOOD_TYPE, SUM (COST_TO_BUY) AND SUM (SELL_PRICE), but I want only to select the ITEM if there is more than 1 points in the FOOD_TYPE.

  I tried all kinds of grouping and even including a case statement in select it as follows:

  CASE

  WHEN (COUNT (DISTINCT POINT) > 1)

  THEN THE POINT

  ELSE "

  END

  However, this is denied when I group because it forces me to use the POINT as a group and I can't use the set statement in the GROUP BY because it has an aggregate function.

  Help, please!

  with

  power as

  (select food_type 'Beef', 'Steaks' article, cost_to_buy 8.00 15.00 sell_price of all the double union)

  Select 'Beef', 'Roast', 10.00, 18.00 double Union all

  Select 'Chicken', 'Wings', 2.00, 5.00 double Union all

  Select 'Ice Cream', 'Chocolate', 0.50, 2.00 double Union all

  Select "Ice Cream", "Vanilla", 0.50, 2.00 double Union all

  Select "Ice Cream", "Strawberry", 0.50, 2.00 double

  )

  Select food_type 'Type of food. "

  cases where the head (separate) over (partition food_type) > 1 then end point "Item,"

  TO_CHAR (cost_to_buy, 'fm990.00') "Purchase cost"

  TO_CHAR (sell_price, 'fm990.00') 'selling price '.

  food

  food_type desc order

  Food Type	Item	Purchase cost	Sell Price
  Ice cream	Chocolate	0.50	2.00
  Ice cream	Strawberry	0.50	2.00
  Ice cream	Vanilla	0.50	2.00
  Chicken	-	2.00	5.00
  Bovine meat	Roast	10 h 00	6:00 pm
  Bovine meat	Steaks	8.00	15 h 00

  Concerning

  Etbin

• Validation rule of error to a value greater than $999,999,999,999.99.

  A validation rule of error for an input value of the user of something higher to $999,999,999,999.99 seems to work only when the amount is 1,000,000,000,100.00 in Oracle policy Automation when written as a Word document rule.

  If the value is implemented at the level of the attribute, then it works for the maximum value of $999,999,999,999.99. And immediately places an error for any value greater than $999,999,999,999.99 even a value of $1,000,000,000,000 is picked up. However, it will be against best practices which is the mixture of source and validation rules.

  I tried all kinds of conditions such as rounding, truncation etc and none seem to work correctly outside validation of the attribute levels.

  @

  Looks like you have to face a maximum value for the validation.

  Do you really need set a very high maximum value? I suggest you enter a maximum value that is a little less than 999,999,999,999.99

  See you soon

  Frank

• Movement of keyframes does not - I can see the values change, but nothing happens in the monitor!

  I'm having a nightmare trying to program in a few Motion keyframes to change the position of an element in my program monitor.

  I created the image key to assign the value of the position of an element in the timeline - I want the clip to move toward the Center on the side of the screen. I followed the guidelines and can see the keyframe symbols appear in the view of key images marking the beginning and the end of the change. What is strange, is that when I press play, I can see values changing in the effect controls panel - but nothing really happens in the clip! The clip in question has a silhouette figure, that I created using images of the figure against a green screen, which has then been hidden. I then applied a track matte key to the below item to fill the silhouette with footage - this has something to do with my animation does not?

  I checked to assure that I do apply keyframes for the clip, checked parameters interpolation of keyframes of & all seems in order. I'm new to first, & I apologize if I've properly referenced the different tools or windows - but I hope you get the idea. I looked online but can't find someone reporting a similar issue, that is certainly a first when you are working with such a popular program. I hope that it is something stupid and can be easily solved.

  Can someone tell me why the keyframes, I could, & can change the clip plays, are not actually affecting the clip at all? Any help would be greatly appreciated.

  I realized after the announcement that if I applied the keyframe to the matte rather than the silhouette clip keyframes of the movement worked. Thanks for the advice so guys!

• When you change an item type only display in hidden element its value changes from any value in value null. Why?

  
  Dear reading

  When to change a display one item type in the hidden element its value changes from null value any value . Why?

  I would like to use the result of the query in the hidden item, as well as to display it in report footer.

  shortly the displayed element can read footer bu area hidden point cannot be viewved in the footer box. Why?

  footer

  & P11_DISPLAY_ONLY_ITEM.

  footer

  & P11_HIDDEN_ITEM.  )

  (site of apex.oracle.com Application Express 4.2.5.00.08)

  concerning

  Enformatik wrote:

  in the part of the properties point setting its source type as query retune unique value;

  but when you set its value to the calculation (before header) it works correctly.

  It is the expected behavior. The values defined in the properties of the Source element / by default are only put in the controls of the page displayed in the browser, not in session state. To refer to a session-state item value (as in a & P11_HIDDEN_ITEM. substitution of static text) then the value must be set in session state in a calculation or process that runs before the substitution reference is returned.

  Setting the value using a calculation is the right way to do it.

• How a function returning length of characters greater than 4000 selected in SQL

  Hello

  I want to know if there is a way to write a select query on a function call that returns a varchar(8) more of 4,000 characters.

  CREATE OR REPLACE FUNCTION FUNC1

  RETURN VARCHAR2

  IS

  Str VARCHAR2 (32767).

  BEGIN

  Str: = < a string greater than 4000 tank >;

  RETURN str;

  END;

  /

  SELECT FUNC1 of double; -What gives a digital error or value of PL/SQL. Character string buffer too small.

  Is there a way to fix this?

  Thank you

  Hello

  From Oracle 12.1, VARCHAR2s can have up to 32767 bytes in SQL.

  In versions 8.1 at 11, VARCHAR2s can have up to 4000 bytes in SQL.  If you need to pass more PL/SQL, then you must spend a CLOB.