Will I need a new wireless card

Similar Questions

• My mouse wireless guard saying lost connection.  I thought that it may need a new Bluetooth card.  An idea of the cost if I do it?

  My mouse wireless guard saying "lost connection".  It takes time for it to reconnect.  Wireless keyboard is OK.  Apple store said that it may need a new Bluetooth "card."  Any idea the cost if necessary.   I tried a new mouse, with the same results.  Having to use a "wired" mouse now taking a much-needed port on my iMac.

  I return to the store and get a better answer. Material, of course, could be the problem. As far as I know, there is no such 'map '.

  Reset the PRAM and SMC... can't hurt, might help.

  Barry

• Do I need a new graphics card

  I have a HP Pavilion Slimline s3400f running Windows 7 32 bit.  I have a HP x 2301 monitor.  I need a new graphics card to take advantage of the speed of 3 ms of the monitor?  I can renovate such a card?

  Hello

  Very nice monitor. The HP Slimline s3400f PC has only a power of 160 watts power is a big problem for the addition of a discrete video card that would allow you to use digital instead of analog video video.  You will see an improvement in the quality of the image with the digital video.

  It is possible to replace the power supply and add it to a profile low low-power video card.

  Contact Athena and get a recommendation of the PSU. HP Slimline power of Athena. There are also mini-ATX converter cable.  If you get a 220 watt PSU then the below video cards should work.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

• Is the sim card on a work by the iPhone nano iPhone 5 6 or would I need a new sim card?

  Is the sim card on a work by the iPhone nano iPhone 5 6 or would I need a new sim card?

  Which one will work - you have no need of a new

  (1189)

• Do I need a new wireless router?

  Has been said by Virgin that although their modem accept 20 MB, my wireless router (a 4 years old Lynksis BEFW1154) won't let me get the faster speeds. As a "silver surfer", I could argue the point with their advisor, because honestly I don't know what he was doing on. What I know, is that I pay a monthly display for flow rate of 20 MB, and having control of internet speed, all I get is 3.3 MB download and 0.9 MB Upload. Do I need a new wireless router? Any constructive suggestions would be much appreciated

  Thanks a lot for your answer. I'll go to local store and explain my problem and tell them your suggestion. I'm sure that they will be able to help. Very much appreciate your help.

  Concerning

  Allycutter

• HP Pavilion g7-1260us: I need a new WiFi card! What works for me

  I really need a new WiFi card that came with my computer is terrible, I need one with the support of dual band, and I would also support bluetooth as well. But Ive been told that a white list in the bios allows me to.

  Ive been resembling different wifi cards and I have the Intel 7260.HMWG network. R

  Wil this work for me if I install it?

  If not can you tell me another powerful Dual Band (and bluetooth possible) Wifi card?

  my computer is HP Pavilion g7-1260us

  BIOS: Insyde F.66

  You have been informed correctly. There is a white list of BIOS. You can use the wifi cards on page 26 and 27 of the manual here:

  Manual

• Will I need a new key of activation windows 8.1 if I reinstall my computer to put my windows on a SSD?

  I plan pass my windows to a SDS using the "all delete and reinstall windows" option in the update as part of recovery. Will I need a new activation key to be resettled windows?

  Thank you.

  You will probably need to reactivate by phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• New wireless card will see available networks but not connect

  For over year I now, I had been using a USB wireless network (I'm not sure it's official name) fine to connect my desktop computer to the wireless, but when that broken I decided to use a wireless card instead. I plugged it to the PC installed the drivers that came on the disc and restarted my PC, when he started upward I saw my (and a few of my neighbors) points of access wireless, but when I tried to connect it gave me varies from error messages including the single "windows was unable to connect to . as well as to tell me the password was wrong a few times (this however is not the case) and finally he would be in touch with ' limited access. When I now run the possibility of troubleshooting problems, it tells me I have a "problem with the wireless adapter or access point" which has not been set. But before he also gave erros as an asisgned not correctly IP address"(I don't remember the exact wording).
  During and since these errors I have restarted my computer several times, reinstalled the drivers from scratch several times and as he told me I had a problem with UP-address I ran have run the command "ipconfig/all", which produces the following section under 'WiFi 2' (who is the connection I am trying to connect):
  The connection-specific DNS suffix:
  Description: 802.11n Wireless LAN Card
  Physical address: C8-3A-35-C9-FF-1C
  DHCP enabled: Yes
  Autoconfiguration enabled: Yes
  Link-local IPv6 address: fe90::2427:959c:823 b: cde8% 30 (Preferred)
  Autoconfiguration IPv4 address: 169.254.205.232 (Preferred)
  Subnet mask: 255.255.0.0
  Default gateway:
  DHCPv6 IOOKING: 516438581
  DHCPv6 DUID client: 00-01-00-01-17-7D-CD-F1-BC-AEC-5-26-31-DE
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP: enabled
  The card that I use is the Tenda W311P and my install of windows is windows 7 Ultimate, the hub I'm trying to connect to is a Hub of BThome.

  Thanks for your time.

  Tom

  Hi Thomas,

  Thanks for posting your query in Microsoft Community.

  I understand that you are facing problems with wireless network in Windows 7.

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• SIM card disabled... Need to unlock Code - or do I need a new SIM card?

  Hi - I was a fool to check my phone late into the night Friday and checked settings-> location & security and went down all the way to lock SIM card. My phone is running the last updated Android for this model of Motorola MB300 BackFlip MotoBlur, I guess it's Android 2.1?

  I went to the where it says set up SIM card lock.

  I went to the where it says card SIM Lock (require PIN using the phone) and he asked for a PIN and I entered my own PIN and then I thought asked that my re - enter to confirm the new PIN code and then it was locked. I couldn't turn the lock, and I got on the screen when he timed out where he said I had the possibility of a PUK code. I don't know what it was, but I entered my code I thought that I did, and then he asked for me to create a new code, which I did, and then he asked me to re - enter the code to confirm. I did, and every time it says INVALID CODE ENTRY or something. So I tried other things. I tried to guess what the PUK code. I sent my parents at this stage because he said I could get the PUK code in caller Service customer. But I do not have to restart my phone and dial a number. I tried to keep guessing. Finally, he said that SIM card has been DISABLED. And now I can only make emergency calls.

  I found somewhere on the Internet that will give the unlock codes for a SIM card if you have the IMEI number of the phone that I have, and the model. I entered the model and IMEI number to see if they had paid him to the record, which they said to do it before the "order"... which I was suspicious. They found my unlock the number, they said, for what I entered. Simply, they want my name, address, etc. and will allow me to pay using credit or debit via Paypal. It costs $ 7.99 for the code.

  I'm not really happy to spend $8 that I can get for free if I go to a local store of AT & T with the technicians and technical help, that will do it for Hello, FREE?, because I pay 5 $par month on phone, insurance which now on this P.O.S. phone, had to be said for her many times... but I secretly want to take in the closest CENTRE of DEVICE OF SUPPORT , I have a recommendation to go form (but that one is a 2.5 hours a one-way ticket on public transport, unfortunately, compared to only an hour or two in a store of tech to give me a new SIM card) and see if I can get this BackFlip swapped for a SideFlip while I'm.

  • What is the chances of that? Just whine enough about the BackFlip even get a SideFlip? The SideFlip is done? To compensate for the BackFlip? (^_*)?
  • Anyone know how to unlock the SIM card once it has been disabled? Or people with reduced mobility means NEVER usable for the rest of its useful life? That's all I need to know now. Mainly.
  • And on the other hand, in passing, if someone got lucky by swapping this out for a SideFlip mofone and what their thoughts were the Motorola SideFlip vs the BackFlip with respect to memory and the Android operating system and version MotoBlue... etc. The usual. Comparisons?

  The tech store I use mainly is closed on Sundays (to get a new SIM card), so I can't go today after all. To remedy this, I hope to get a response on this forum. Please post anything you know that might help me for FREE get this MOFONE FIXED and SIM re-activated or reactivated. And it's too late in the day to get to the CENTER of SUPPORT of DEVICE. So boo hoo. I'm screwed. I would like to have a car and not a nice bike respectful of the environment.

  PS - I've READ online THAT THE PUK FOR THIS PHONE IS ALWAYS 1111, but I think they were referring to the device of MiFi who came, not the BackFlip MB300... so I don't know if the PUK Code is universally 1111 or what, but it does NOT work. What could be? Is - this own to my phone and the IMEI number? Thank you!!!

  djpurity

  If the SIM card is deactivated so your best bet is to get a new one. AT & T gives them for free, but there is not many other v e can do. Blocking of SIM cards is a security feature to protect your account as a sim card is linked to a phone number.

  Other unlocks forsale are online for carrier unlocks - unlocking a phone to use with another carrier. The unlock code requiring an IMEI unlock for another carrier - it won't help with SIM disabled.

  If you could easily unblock a SIM card, anyone could steal your phone and break the SIM lock. As far as I know, once the SIM card is disabled, you must a new.

  But the good news is that AT & T gives free new.

• Satellite L650 - 1 M 0: could not activate the new wireless card

  Hello

  I replaced the wireless card in the laptop on WiFi + BT (Combo). New brand of laptop do not had favor of BT
  Bluetooth and WiFi work correctly on the system drivers that the system itself.

  The only problem with the new adapter is unable to activate or disable the network modules.
  Since my laptop does not support default BT will automatically turn off the controller module.

  WiFi must be turned off and as in the previous card - a function key. Unfortunately, wireless in the function bar option has disappeared, and the FN + F8 key combination does nothing. Responsible for the light WiFi is on all the time.

  It is possible to activate the WiFi module as before?
  Very please help!

  Laptop: TOSHIBA L650 1 M 0
  The new network adapter: BCM94313HMGB

  Sorry for my bad English.
  I used the Google Translator because I can't speak English. Only the Polish language ;)

  > Is it possible to activate the WiFi module as before?

  You have replaced the WLan module, which means that the hardware configuration has been changed. This means that the different module has affected the functionality of the software.

  The new WLan/BT BCM94313HMGB combo card seems to be designed by Broadcom.
  Of my knowledge that supports most of the laptops Toshiba Intel / modules Realtek or Atheros. This is why I think there may be a compatibility problem between the FN key software and this module.

  Maybe you can try to install the Broadcom driver once more to check if this can help, if not you will have to renounce that.

• Satellite 5100 503 - I need a new graphics card

  My 5100-503 Satellite picture shows scrambled during the start especially when the computer is hot.
  The sound breaks also.

  He was diagnosed as a problem of display card. The card has a chip from nVidia GeForce4 440 Go.
  What is the equivalent card available on the market or any reliable source?

  As far as I know the graphic card cannot be exchanged. It s soldered onto the motherboard and so you need a new mainboard.
  Are you sure it's a graphics card problem? You have the same problem on an external monitor? Check it!

  Maybe the laptop gets to hot, so try to clean with a jet of compressed air. This could blow out the dust.

• BlackBerry Bold 9900 smartphones will not recognize the new SIM card

  I recently got a Bold 9900 as a gift. In my view, that the phone has been used on the Orange network.

  I tried replacing the original Orange SIM card with my SIMcard "pay-as-you-go" three, when I turn on the phone I get the message "SIM not recognized" and a dialog box asking me to enter a code to unlock the SIM card.

  Because this means that the phone is locked on Orange network. If so, how can I get the unlock code for the new SIM card?

  Best regards

  SS

  Hello and welcome to the community!

  You have in fact potentially two issues to deal with... When BBs are made, they are "locked" to their original media and cannot be used on any other carrier up to this MEP is unlocked. Reference:

  • http://supportforums.BlackBerry.com/T5/General-BlackBerry-functions-and/unlocking-your-BlackBerry-gu...

  But the error you say does not quite what I'd expect from an MEP lock... but please check after the above and see if your BB is indeed MEP locked... If so, then Yes you need to unlock it until you can use it on any other carrier.

  Or - some SIM cards are delivered with a code of their own necessary to unlock and use. But the supplier of the SIM card which should also give unlock code you with this (if that's what applies to your situation).

  So, I suggest you check to see if your device is still locked MEP... If so, get a code (you may have to pay) and unlock it. Then try the SIM card again. If it still fails then your SIM card provider.

  In addition, please check with your mobile service provider preferred 100% certain that your BB model is 100% compatible with their network for all services.

  Good luck!

• Choppy playback, need a new graphics card?

  Hi all

  I am currently using Premiere Pro CS4.

  With my GT8800 Alpha Dog 512 mb graphics card, is it sufficient for video editing?

  When I play the video on the first, it seems very lag and of course, it is not smooth at all.

  I imported the 1920 by 1080 HD format, which is filmed with Canon 5 d.

  I am looking at nvidia GFX480/470 or quadro series. But I don't want that there was capacity for a game too.

  Please advise me.

  Please advise me.

  Using any version of first before CS5, the video card will make little or no difference in the editing experience.  The biggest performance factors will firstly be the CPU and second memory.  Look for before buying a new graphics card.

  Having said that, CS5 is designed with pictures DSLR in mind, wasn't CS4.  Your best bet would be to upgrade first before buying new hardware.

• I think that I need a new graphics card for my Satellite M70 343

  Hello

  I had problems with my laptop. After a start-up time specifications and give a problem with the IALMRNT5 pilot report. The laptop also gives some display problems, after a certain time, then another graphic resolution is displayed.

  I have restored the software but is not a solution and also I downloaded the drivers from the Toshiba Support Site!
  I think the graphics card to give problems.
  Where can I buy the new graphics card?
  Installed: Intel 915GM/GMS, 910MS Express smart card.

  Hello

  It s not possible to exchange the VGA card in your system, since the VGA is soldered on the motherboard (the most important thing of your laptop on which all components are on) and if you have a problem with your graphics card then you should contact a local service partner authorized, due to a hardwarecheckup or a repair of your device.

  To find the closest just check the following link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• Satellite M70 - 147 - which driver I need for the wireless card?

  Hi all

  I installed Windows 7 on my Satellite M70-147. Everything works fine, except the WLAN.
  Does anyone know that drivers to use (perhaps a universal) to make this work?

  I don't know what card is in my notebook, I tried the drivers of toshiba for adapters intel, realtek, and ahteros.

  Your help would be much appreciated!

  Hey Buddy,

  First you must make sure what WLAN card you have. Therefore, you can check the device ID and device for the provider Manager. Enter these codes on this Web site: http://www.pcidatabase.com/

  You will see you have the WLAN card. After that, you can try to install the correct driver for your card.

  Good luck! :)