Win + shift + the arrow shortcut does not work

Similar Questions

• The SPACEBAR shortcut does not work.

  The hand appears, but I can't click to pan - it is not catching. If I switch to the hand tool, it does not until I click once, then work. I am running Illustrator CC on 10 of Windows on a new laptop Asus. Thank you in advance for your help!

  Found the problem! Asus has a default setting that helps the trackpad while typing, in order to avoid accidentally moving the cursor stop "helpfully". Once it comes into play, it is impossible to pan. Turned off the setting through settings > devices > mouse and touch pad and it works very well.

• Case change keyboard shortcut does not work in the PL/SQL Editor

  I use the keyboard shortcut CTRL - SHIFT-"quite a bit to change the case of the code. I'm in the latest version of EA and this shortcut does not work for me in the PL/SQL Editor, but still does not work in SQL Editor. You do not know if this is normal or not, but miss me it.

  Unset for the Code Editor and spreadsheet and together for other category - then it will run in a SQL worksheet and an editor of proceedings

  The PPE of the cpu, if necessary, take a jstack and start a new thread.

• When I enter a Web site in the url of the Enter key does not work. I have to click on the arrow at the end of the line. Is this a configuration problem?

  The Enter key does not work in the line of the URL. If I go says:
  www.Bing.com
  and then press the Enter key, nothing happens.
  I have to click the arrow at the end of the field in order to activate the link.
  If I am anywhere else on any page the Enter key works as it should.

  Please click the button of resolved next to the answer that solved your problem of Firefox support, when you are connected.

• 'Ctrl + End' keyboard shortcut does not work as expected. I tried safe mode. does not move the tab to the end of such specified list, just scroll to the end of the page.

  According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
  'Ctrl + End' should move the active tab to the end of the list of tabs.

  But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.

  I tried the mode without failure of firefox and closed all other open programs.

  What to do to debug this problem?
  or may there is a bug in firefox somehow?

  See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895

  Add code to userChrome.css below @namespace.

  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
  

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

  I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• char key shortcut does not work

  Hi all

  I added a keyboard shortcut for my button in my application, I try to test it on Simulator with JDE 4.5, Curve 8300, I want that when the press 'Enter' button the user, the application move to "happy" page, the "Enter" button works. But when the press 'C' application user move to the "happy" page, but it does not work, this is my code:

  CustomButtonField colour2 = new CustomButtonField("C\u0332ontent",  Field.FOCUSABLE | Field.FIELD_HCENTER)
  { protected boolean navigationClick(int status, int time)   {
              System.out.println("In Button");
              getApp().ContentsMunif(-2);
              invalidate();
              return false;
      }
      public boolean keyChar(char key, int status, int time)    {
              if (key == Characters.ENTER || key == Characters.LATIN_CAPITAL_LETTER_C)      {
              System.out.println("In Button");
              getApp().ContentsMunif(-2);
              invalidate();
          }
          invalidate();
          return false;
      }
        public void paint(Graphics graphics)      {
              graphics.setColor(0xffffff);
                  graphics.clear();
                  super.paint(graphics);
              }
  }
  

  Please help me, the 'C' key does not work why? What is the error in my code, which is that it does not work?

  I'm kind of multiple personality disorder

  Try

  key == 'c '.

• j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  j ' have an asus x93s it does not read my dell AIO 926 photo printer all-in-one. I HAVE BEAUTIFUL DOWNLOAD THE DRIVER.CA DOES NOT WORK!

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• Win7 64 bit freezes & arrow function does not work, do not click to navigate anywhere

  Win7 64 bit PC crashes & arrow function does not work, do not click to navigate anywhere, exceptionally after being on ~ 2 + hrs. I can only turn off by pressing the power switch for about 5 seconds.

  Hello

  You did changes to the computer before the show?
  
  Method 1
  Step 1: I suggest to start the computer in safe mode and check if the problem persists.
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:  If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  Also provide an observer event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

  As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

  Have you installed the latest update of Pandora (version 7.6), posted on September 13, 2016?

• How to copy and paste into the search engine does not work?

  How to copy and paste into the search engine does not work?

  It should be.

  Restart your Mac and try again.

  Other than that, make sure that OS X is updated.

  Open the App Store, and then select the updates menu.

• When in my wordpress dashboard, the Visual Editor does not work?

  Regularly when I'm in my wordpress dashboard, the Visual Editor does not work. Sometimes, not all the time. I tried the following:
  Disabled individual plug-ins
  Theme modified
  cache cleared
  uninstalled, then reinstalled Firefox
  'disable the Visual Editor' unchecked

  Thanks a lot for any help

  When this happens, you are totally unable to type/edit in the edit box, or are there limited functionality? The toolbar appear?

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.