Win2k3 comments of 64-bit does not start on 64-bit Vista, processor E6700 with VT active host

Similar Questions

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• MS Essentials does not start and demo IS2010 Antivirus never stops with pop ups.

  I think that the antivirus IS2010 demo is itself a virus and continues to try to make you buy new one every minute.  I can't remove it because I thought it is used by another program, and I think he has infected MS Essentials. How stupid to sell antivirus software, annoy a potentia; customer.
  Someone at - it a suggestion on how to get rid of IS2010, it starts at the start and continues to give warnings of virus every 20 seconds.
  TIA

  Do you mean Internet Security 2010?  As you think, it is a rogue security program that claims to find files infected your computer and try to make you pay for the program.  Don't do it! Click on the Red 'X' in the top of the window title bar to close the window, or press Alt + F4 on the keyboard.

  See the remove Internet Security 2010 (uninstall Guide) at BleepingComputer.com . Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K

• Satellite L40-139 does not start

  ? 19/02/2014 18:41 - edited? 19/02/2014-18:45

  Hello, I have a problem with the SATELLITE L40-139

  the thing is when I press the power button / stop, hard drive led will begin to Flash, CD-ROM led is lit and the screen is black. I noticed that advise in the CD-ROM makes a sound ICT in the same way the hdd led flashes (when it flashes I hear a tick form CD, yes I unfolded any computer laptop).

  I can only say that I have connected my PC HARD drive and it's working., good fan is not working too, but I think it will start, after some time (as he always did)

  Notebook crash circumstances are now saying: that a year ago, he fell from 1 inch (such height ;]) I saw that the ribbon cable connecting the touchpad to the mohterboard was broken and my diidn can't start computer, I thought that there's a problem, but I forgot and left the laptop for more than 9 months (with hard disassebled and battery and cd-rom drive) and then I decided to try to turn it on.
  And viola! It works it boots etc.

  After a month of being happy, I'm drunk I couldn't sit on the Chair and I decided to sleep with my laptop on the bed, I lied right down and put the laptop on my belly and it crashed (screen freezes) so I decided to reboot, but it does not start.

  Here is a video with what I get when turning the power on it: [http://www.youtube.com/watch?v=jC0pGBBVwJk] (not Fortunately my phone fell in the mud and shifts when I record videos)

  Some people suggest I should connect an external display to see if theres no picture but the result is always the same. (Screen not even fuels not on)

  Maybe someone could help me fix without sending it to the customer service.

  See you soon.

  On this virtual path, it is not easy to say what the problem is here. Of course, you can try to do some tests and try to make some conclusions which may be wrong. After his last stop somewhere I think that there is big problem with graphics card. Of course I can't say it for sure.

  Diagnosis just exact mainboard can offer answers. I m afraid mainboard is dead and must be exchanged.

• Tecra A11 - 11N does not start after upgrading CPU

  Hello

  I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor.

  I started the 430M, done some research on the internet and discovered that the 580 M has a very high FSB speed, and that is what probably does not work / not compatible with my machine.

  http://Ark.Intel.com/products/43537/
  http://Ark.Intel.com/products/49653
  http://Ark.Intel.com/products/49652

  and also http://ark.intel.com/

  Now, I went back to the computer store, returned the 580M and got an i5 - 560 M compared to its specifications as I've seen it would not compatible because it has the same speed of the FSB with the 430 M.

  I then later in the day tried to install this cpu as an upgrade, BUT alas!
  It STILL does not START ALSO.
  I was dumfounded left. The processors in the same line of the family are supposed to be compatible between them provided: lithography, FSB and socket type are similar.

  Or what I'm missing here?
  I did upgrades of CPU in many cases for desktop computers and laptops, and this is the first that has left me with no word to say!

  Please offer assistance or advice.

  Simon

  + The message has been modified.

  Hello

  Recommend to check this doc from Toshiba:

  + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Upgrading the CPU is not supported (officially).
  The point is that, even if the chipset would support the new processor, it would be possible that the laptop wouldn't start because of compatibility problems between the BIOS or other components on the motherboard and the new processor.

• Satellite P10 554 does not start

  Hello!

  First of all, sorry for my bad English

  The problem:

  I installed windows XP Professional on my Satellite P10 554.
  I bought it on ebay and the seller said that everything goes well with this laptop and the tests when I turn on the laptop saying the same thing.

  But after installing XP, it does not start!
  It is the boot screen with the blue line that moves. This line moves a little, that it stop and that all the time and nothing happens!
  I tried the same thing with XP home, and windows 2000, but it has the same problem!
  I really need this phone. I hope someone can help me!

  Christian

  > I bought it on eBay and the seller said that if everything goes well with this laptop and the tests when I turn on the laptop saying the same thing.

  You said that the test says it of ok. How did you test it?

  > It's the boot screen with the blue line that moves.

  You mean the OS bar which moves while loads the OS. Am I wrong?
  Hmm, if you have tested the laptop with Win XP and W2K then I guess that you have installed the two OS on this laptop and it was possible to install it?
  Am I wrong?

  Sorry to say but if the laptop is unable to load the operating system the hardware would be a malfunction.
  I think you should first check the memory modules, then the HARD drive. Maybe one of the modules does not work correctly or some bad sectors can cause the problem.

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!

• HP ENVY laptop - 15-k101nx: HP envy 15 does not start after failing to set up

  Failed to configure Windows (it took so long and shows no percentage) so I turned off my laptop, removed and unremoved battery and turned on it. The problem is it does not start and the screen is all black with little light on it.

  What I've done so far:

  -J' tried to restore the BIOS by following the instructions here say: http://support.hp.com/ee-en/document/c02693833 ; However, I still have the same problem after restoring the BIOS.

  -J' also tried a few hardware diagnostic test, he failed in the test of ' disk hard short dst check "and gave me chess and product IDS.
  -He also failed in the Startup Repair tool

  My laptop is still covered with warranty accdg here 'http://h10025.www1.hp.com/ewfrf/wc/weInput?lc=en&dlc=en&cc=us&tmp_weCountry=&tmp_weSerial=&tmp_wePro... '. but the characters upon receipt of my laptop is already melted aways since they are written on a thermal paper.

  BTW, I can always open the command prompt and the research on the C: drive and see my files, but don't know what to do whenever I used the chkdisk command, it asks me to do things I'm not familiar with.  I just heard that the chkdisk command solves the problem temporarily.
  
  What do you think are the alternatives and solutions to the problem of my laptop?

  Yes the hard drive needs to be replaced. Just call support and they will have it replaced for you under warranty.

• Windows Vista does not start at startup

  I have a Dell Inspiron 1525. My wife uses mainly the laptop for access online, certain professional activities (Word documents, spreadsheets) - nothing major.

  Today, after starting the Dell system, the laptop would not boot correctly. It would have wrapped after the Windows flag and never completely boot. What I have done so far to try (unsuccessfully) the question of setting:

  (1) launch Startup Repair (recommended) - no resolution

  (2) Ran Dell Diagnostics - received error code: 2000-0333

  (2) selectable repair your computer from the Advanced Boot Options and attempted a system restore - it has failed because of an i/o device error (0x8007045D)

  Not sure which is precisely the problem. Please help to troubleshoot and resolve this problem.

  Thank you

  D

  Hello

  Follow these steps using the Dell diagnostic process, especially by pressing F12 at startup.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266787

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  If Dell information does not resolve the problem, you may need to reinstall the operating system.

  See you soon.

• X 200: does not start

  My X 200 battery discharged when the computer was in mode 'sleep'. The battery is now, but the computer does not start on battery or AC power (or with ca when the battery is removed). I tried removing the battery and pressing the power 10 times switch, then holding it for 30 seconds, but this has no effect. I left it overnight with the connected AC and a charged battery, but at no time did the computer starts. The battery light indicates the unit is on. the power light is also on. The laptop is warm and snoring but the BIOS is not started, and the hard drive light does not illuminate. The computer is no longer under warranty and what I've read, the system board is hard to find now. Until yesterday, the system works beautifully. What should I check or do next?

  This is a known issue and here is the solution: http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT004164

• INSTALL A PROGRAM DOES NOT START AUTOMATICALLY, IN VISTA WHERE THE COMMAND IS RUN?

  PROGRAM DISK DOES NOT START AUTOMATICALLY, IN MS VISTA WHERE THE COMMAND IS RUN OR HOW DO I INSTALL THE PROGRAM?

  Click Start > programs > Accessories > RUN.

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-run-command-on-Windows-Vista-Start-menu/

  Link above will help you.

  http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  And this will interest you as well.

  See you soon. Mick Murphy - Microsoft partner

• Creative Cloud Desktop does not start

  What creative Office Cloud tries to start the icon appears briefly in the upper part of the screen and then goes.  The application does not start.  I was in a conversation with the support of Adobe, but no luck.  Any ideas?

  I just finished a new version of the software.  Reformat the disk, installed the operating system and loaded software at the same time.  Everything works as it should now but it's of course a lot of work.

• VMware does not start - guest xp 32 bit SP3

  Running vmware guest 32-bit xp SP3 will not start not host is mac os x 10.6.4

  See zip files in next post according to Woody comments

  You still have not edited your original post and removed the copy and pasted the contents of the log file...

  Well I can start a Virtual Machine Window XP with your configuration so .vmx file at least, good sound, however, you will need to provide adequate information to help diagnose your problem and while the vmware.log file may be useful is not always tell the whole story, so take a look at HOWTO: ask (and answer) Questions as a guideline , then provide additional details and then just "vmware does not start - guest xp 32 bit SP3.

  Remember to change the message original and deleted the copy and paste the contents of the log file.

  (Just in case...) On the right side upwards under Actions click on Edit thread.)