Win7 does not start on my Satellite L500

Hello

I have Toshiba L500 and I have problem with my software. When I start windows the PC freezes and I see a black screen and the mouse. I tried to start it in safe mode, and then restarting the PC just and safe mode does not work.

After that, I played the restore CD but the same as safe mode... When I run mode safe mode with the recovery CD, I get something, but my option is to wipe the entire hard drive. Then I tried to start Ubuntu Livecd to take my files but the computer restart again... I have no ideas if anyone can help me is welcomed :)

Hello

If you want to save the date, the recovery disc won't help you.
The defined recovery disk notebook to factory settings, which means that the HARD drive will be formatted.

If you need the data from the HARD drive, you could remove the laptop HARD drive and could connect to another computer using the USB to SATA (2.5 USB enclosure) controller.
In this case, you could get access to the files on the HARD drive but it will work only if the HARD drive is not defective

Tags: Toshiba

Similar Questions

  • Screen does not work on my Satellite L500

    My Satellite L500 screen does not work. I can connect the laptop to a monitor and use ok but the screen of the laptop remains blank.

    I did something to cause this?

    I don t think so.
    If you cannot switch back to the display of s for laptop using FN + F5 I m afraid there is a hardware problem.

    The problem with the display cable or show itself. Is the laptop must be disassembled and all this needs to be checked.
    You can contact Toshiba service nearest and ask for help.

  • DV7-4180us giving msg No. Boot Device or n, HDD, Win7 does not start.

    Well, I think I've reached the beginning of what may be a serious problem. I've been away for 9 months and my laptop had been stored in his bag all the time not used with the battery disconnected. I went 2 weeks ago and it had been fine until last Saturday. I started it upwards and once the logon screen Win7 and logging frozen inside, and the screen went black. I have it turned off and restarted, and then he came up with the error message "No. Boot Device" as if Win7 is no longer installed. I ran several virus scanners and they came back without anything, I'm sure that this is not a virus, I mean I have not yet downloaded something long because before my departure other than all of the updates, I missed. I tried to reset the BIOS to factory default and use PC tune-up AVG to fix all the errors, but I'm still having this issue.  Funny, it is sometimes the laptop runs and sometimes it won't so I think this load default Win7 will progressively get worse? Not really sure cause I'm not very technical with laptops.

    I tried to run the test drive in the BIOS when it does not load, but it is just like "No hard drive detected" every time, but it passes the test of memory.

    The reason why I'm here is to know what are my options to resolve this problem, so far the only thing that I can think of is to replace the HARD drive and reinstall Win7 but I want to make it as painless as possible, or see what others can suggest.

    I have no disc for reinstallation of Win7 or any similar to disks. My laptop is out of warranty. I know that I have the Local disk drive (c :)) and also the recovery disk (D :).)  My hard drive is a TOSHIBA MK6465GSX.

    Some of my questions are when I take off the Toshiba HDD that will of course remove the (C :) drive BUT it will also delete my recovery disk (D :)? * see link below for what players I have *)

    http://img255.imageshack.us/img255/315/compcx.PNG

    Should I replace the HARD drive I have to reinstall Win7 correct?

    Hello

    A safe and fast way is to clone your HARD drive when it is until running, it means you have the same OS, drivers, software. All you need is the same size or more (capacity) of HARD drive and cloning software. You can find some free cloning software in the following list:

    http://DownloadSquad.switched.com/2008/09/05/5-free-apps-to-clone-your-hard-drive/

    I hope this helps.

  • Windows does not start on my Satellite P300

    Hi all

    I have a problem with my Toshiba Satellite P300-22R.
    When I start the PC, the normal start screen comes (Toshiba Leading Innovation) I can also launch the BIOS and all the stuff. But now nothing works again! I'm still in this screen, Windows will not start and when I press F2 I don't come to the BIOS. Can you help me?

    Thank you and best regards

    Angelo

    Start your laptop and press F8 to display the advanced startup options. To start Windows in safe mode, try to please.
    Send comments.

  • Sims2 does not start on my satellite m60-167

    anyone has an idea why the sims2 does not work on my laptop? This shows only the logo and claims "sims2 noticed a problem and has to be finished."
    Why? There is no clonecd installed etc....
    everything seems to be on the new standard on my laptop. What is going on?
    Thank you very much for the help.

    Hello Petra

    It is very strange because the Satellite M60 has a very powerful graphics card. As you know on this path, it is not easy to give a precise answer. Sims2 is known to me, but I've never tried.

    Usually some games detect a problem with the performance of the graphics card, but the error message which mentioned is unfortunately not accurate. Thank you for visiting the SIMS2 support page. Toshiba doesn't support game problems and you have more chance to get some tips on the SIMS2 support page.

    Good luck!

  • Re: Recovey menu does not appear on my Satellite L500-19 X

    Hello

    I can't start my toshiba laptop L500 - 19 X.

    When I start to appear two menu option. 1. start normally or 2. Recovery mode. These two options cannot run windows 7. I only get black window without seeing all the windows.

    I try to press F8 to access the detailed recovery menu. I selects the computer repair option, wait for the Toshiba Recovery Menu of Options but it is not. The only thing appears on the screen is the pointer of the mouse in the minor mode of resolution, but I do not see the menu, and cela stills forever.

    What can I do?

    Thank you.

    Hallo

    HARD drive recovery option follow works as described in the document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
    Please, be nice and explain what steps are available on your computer so that we can understand what happens exactly when start you the repair my computer option.

  • Win 7 does not start on the Satellite

    So last night, I was using my Toshiba Satellite laptop.
    I know a lot of details because I'm not very good with laptops. Here is where the problems start.

    So after I finished I stopped him.
    The next morning I wake up, he would not start windows.
    I am currently using windows 7. Anyway, he tells me to stop. I start again, and then it gives me only 2 options: Startup Repair or run windows normally.
    When I try run windows normally it says "starting windows", but it never starts.

    Then when I try the startup repair it will attempt to repair and I do for 8 hours and no luck. It is said a recent move of hardware or software can have him cause. But I got nothing except the charger is connected.

    I REALLY WANT TO USE MY LAPTOP D:

    CAN SOMEONE HELP ME PLEASE? !!

    > I am currently using windows 7. Anyway, he tells me to stop. I start again, and then it gives me only 2 options: Startup Repair or run windows normally. When I try run windows normally it says "starting windows", but it never starts.

    It seems that the Windows operating system was messed up I m not very well why, but these things that happens simply
    However, you can try to recover the laptop using the recovery of HARD drive option. But it will not work, if you didn t format the HARD drive and didn't delete the partition of HARD drive recovery.

    So try to power the device, press F8, choose repair my computer, then choose recovery Toshiba.
    Notes; This reformatted the system partition currently which means that you lose the files on the C partition.

  • Windows 10 restore to Win7 does not start

    Installed (upgraded) to Windows 10 and he ran very well in the beginning.  After a few days it started to act buggy (taskbar has stopped responding, etc.) so I decided to go back to Windows 7.

    I started to restore and he arrived at the final stage, and he said he could not complete the operation - he couldn't fix my Win7 startup file.

    So I tried a system repair from the installation discs for Win7 Hm Pemium.  First, he said he repaired the system - but it would still not start upward.  Got a 7F error BSOD Stop (0d, 0, 0, 0).  Do you have the system repair again and now it is in an infinite loop and reset my system start-up.

    I called MS Tech support Win and downloaded a Win10 ISO.  A ran this system reconstruction/repair - and it only gives me the opportunity to do a repair (recovered) Win 7.  So I tried it and it's still in a boot loop.

    I suggest that you use your Windows 7 Home Premium installation disc and perform a custom installation. Perform a custom installation just in case you have data on the drive that you would recover as:

    How to: perform a customized Windows installation

  • Preinstaled Vista does not start on my Satellite A200

    Hello.
    Im having problems with my laptop and desperately need help.
    Laptop is a Toshiba Satellite A200 model n PSAF6A-07G01N.
    Under Vista 32 bit.
    BIOS is Phoenix TrustedCore.

    I'll run you through the events:
    Downloaded updates to the BIOS from the toshiba site. BIOS 2.5

    Everything worked very well after you restart the computer.

    Have never defragged my hard drive so downloaded Piriform Defraggler 2.00.230

    Ran the program and the computer on the left.

    Came back later and blue screen. NA not take notes error codes, but remember seeing 'disable the Bios memory options such as implementing caching or shading' and there was also a message from physical memory dump.

    I tried to restart the computer, but can only go beyond the Green loading bar of microsoft and then stops at a black screen with only the cursor at this stage having disable because nothing else can be done.

    Laptop starts up fine in safe mode.

    I uninstalled the program Piriform Defraggler, thinking that this may be the problem.

    I have 2 options when the computer starts up normally 'repair your computer (recommended)' or 'start windows normally '. If I select 'Repair your computer' I just get a message saying if iv recently installed programs to uninstall and if iv connected an external device to the computer to remove it and the problem cannot be resolved and to send a report to Microsoft.

    IV tried to use the restoration of the system, but for some reason, there is no restore point.

    IV tried "Last good known Configuration" function in the advanced boot options but no change.

    IV entered my properties of drive in safe mode and is sure that "activate the cache of disk write" is not enabled.

    IV made sure my BIOS is on the default settings.

    Now I'm at a loss full as to what I should do next?
    A defragged program deleted something that it shouldn't? Or did the update of the BIOS something that it shouldn't?

    As a last option, I don't really want to do, if I run the "Toshiba recovery wizard" that the problem will be solved?

    Any help would be greatly appreciated.
    See you soon!

    I n t want to speculate on what the problem may be, but the fact is that preinstalled Vista is doomed.
    There is no guarantee that you will be able to get it working again.

    In my opinion the best option for you is to install Vista using Toshiba recovery disc.
    Prior to this, start the operating system in safe mode and back up all your important data.

    Toshiba Recovery Wizard has no repair option. It can be used for any new OS install.
    By the way: why you don t want to reinstall the OS? Want you good working OS or want to spend days trying to solve this problem?

  • IKEA kitchenplanner 3D does not start at the Satellite L305D

    Toshiba Satellite L305D-105, with Vista, all installed updates, browser, IE9.

    When you install the kitchenplanner 3D of IKEA, the computer responds with a response DEP (data execution protection) and close the browser.

    After the exclusion of the DEP control IE9, nothing has changed, browser close to execution.

    Tried another browser, Firefox and Chrome, were also blocked.

    It seems that control material for DEP in the Toshiba is too strong.

    Any ideas to restore control of the DEP to the laptop.

    Jaap Boot,

    Zeist, Netherlands.

    Hey,.

    I put t think that it s a related problem of Toshiba, especially if everything else works correctly and only the plane of IKEA Kitchen not.

    You must contact the IKEA online technical support so it s a known issue. Perhaps there is a newer version or update is necessary. Don t get me wrong, but in this case you need assistance to IKEA because they know everything about their own products.

    Good luck! :)

  • CEC_main.exe does not start on my Satellite P300-17R

    Hello, I have a Toshiba Satellite P300-17R and when I run the Windows Vista (32 bit), an error message is displayed. This message is:
    Cannot run cec_main.exe. Pleaseinstall this program once again!

    Since I have a laptop pre installed I do not have the installation disc.

    DOE anyone know where I can find the driver / software to reinstall this programm of camera or solve this problem.

    Thank you

    René Bye

    Post edited by: renene

    > Since I have a laptop pre installed I do not have the installation disc.
    ' ' I don't know how long do you have this laptop but it is strongly recommended to create the recovery DVD disc using preinstalled "Toshiba Recovery Disc Creator. It is very important for you. If something goes wrong and you will not be able to use the operating system more how do you install again?

    Return to described the issue. Please visit Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp choose your model of laptop it and download and install webcam driver. Before you do this the system version preinstalled deletion.

  • Win7 does not start

    I had to replace the power supply.  Once I got Win7 power began to fail.  Firstly it would stop the execution and the PC would freeze.  I need to start hard.  Sometimes it turns on and other times nothing.  I had every error screen of the BIOS, another at the botton showing a crashdump and black safe or Normal screen.  When it comes on, I get a screen that shows ASUS Express Gate at the base.  I tried to fix it with a local guy, he has been here twice and returned.  There are sometimes intermitten it works for an hour and a few times a day or two.

    I had to replace the power supply.  Once I got Win7 power began to fail.  Firstly it would stop the execution and the PC would freeze.  I need to start hard.  Sometimes it turns on and other times nothing.  I had every error screen of the BIOS, another at the botton showing a crashdump and black safe or Normal screen.  When it comes on, I get a screen that shows ASUS Express Gate at the base.  I tried to fix it with a local guy, he has been here twice and returned.  There are sometimes intermitten it works for an hour and a few times a day or two.

    If you found the error of the forms "from the BIOS' while the machine needed more of a replacement for"power pack ".

    Most probably he has burned several components.  Maybe something in the motherboard.

    What is a 'power pack', anyway?  It's a laptop and it is the battery?  What is a power source?

  • Re: Black magic does not start on my Satellite Pro

    Hi there guys

    I have a program that I have loaded on my PC laptop Toshiba Pro. Its an official black drawings magic program related to video Production.
    The program is designed to work with Windows 7 but he hesitates because it is start and then gives an error window that says that there is a flaw in the aticfx32.dll prog.

    The strange thing is that the program will start when the computer is in safe mode and give the correct opening screen.
    Obviously I can't use it in safe mode as I have all the correct connections of the machine.

    Is the strangest thing is that I was able to make it work on 2 other machines one with XP and one with Vista and it controls the video speed very well. (the other machines are workstations so I can't really use it, I need to be portable)
    Someone else saw the above error? and why it starts ok in safe mode?

    Andy

    Hello Andy

    Toshiba doesn't support any third party application, so please, contact the program manufacturer and ask for help.
    They have the best experience with own product and should be able to help.

  • Satellite L500-1TC - does not start and the screen stays black

    Hello

    I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
    The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
    No idea what I can do?
    The warranty is still active, so can I send it to Toshiba?
    Kind regards
    Sven
    (Sorry for my bad English)

    Hey Buddy,

    What you can try before you contact Toshiba official service is the following:
    [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

    If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

  • Satellite L500-164 does not start sometimes

    Heyas!

    For most laptop does not start on the first attempt. The Power LED lights up, the cooler and the HARD drive start (it looks that they rotate exactly once) and that's it. After a few seconds the laptop turns off again. There is no screen and the LED on the HARD drive also not would light up. If that happens, I start the laptop again and again. In most cases I need to start 2 - 3 times, but once I had to start 20 times until it worked.

    I also tried to start just with the power supply (I hope that's the right word for it, I'm German = D) and took the battery out of it, but the result was the same.

    But when the laptop finally started, it works without problem.

    Greetings,
    Daniel

    It is not easy to say what the problem is but it certainly is hardware related issue and your laptop must be verified by the authorized service partner Toshiba. With the help of diagnostic tools that they can find out why this happens.

    Here in this virtual world we can only speculate on the possible reasons.

Maybe you are looking for

  • Why is sending e-mails with attachments slow

    Hello The context of this question is: I had an Apple iMac for a little more than 3 years; and I use "Mail" application to send/receive emails; but it is not uncommon, when I send an email with one or several attachments all the e-mail does not recei

  • Tecra S3 treat 99% because of the video driver

    I have a tecra S3, all with the latest drivers provided by Toshiba.All browsing some website/tool (a lot of controls active-X in there) the IE process (Firefix also) going to 99%, if the process is killed, the "explorer.exe" process is at 99% and so

  • wireless driver for hp 15r-006 you

    Hello I need wireless driver for windows 7 ultimate 64-bit. My computer model mobile no is hp 15r - 006 c. Thanks in advance. -- Nandan

  • What are SupportStaff (netxpert) Repair Service entries in the Services?

    Windows 7 I have three entries in the Services on behalf of SupportStaff Repair Service (netxpert). Is these services are authentic and if so are they necessary? If not necessary, how to remove?

  • Not enough question resources MSDS-driver-TelepresenceServer

    Hi all We have a solution with TMS (14.6.2), conductor (XC3.0.3) and GST (4.1 (2.33)). Since we went from the TMS to 14.6.2 (from 14.2.1), we get this error: tpsfail.PNG We get this error when we have another time and both get more than 12 participan