Win7 Ultra USB 3.0 - cannot install

Similar Questions

• Win7 print spooler error. Cannot install my printer.

  I bought a new Samsung Mini laptop with Win7 preinstalled.  I tried to install my normally (a fairly new Samsung CLP 315 Color Laser) and the system will not allow it.  I get the following error:

  Windows can't open add printer.  The
  local print spooler service is not running.
  Please restart the spooler or restart the
  machine.

  I rebooted the machine and got the same error.  I went to the services.msc file and attempted to start the spooler service to and I got the following error in the column "description":

  I tried to restart the spooler service to and I received the following error message:

  Windows could not start the spooler on Local computer service.

  Error 1053: The service did not demand launch or timely control.

  I tried to download the current driver more than Samsung.  I have read every thread repair throughout the web and tried a thousand different repair attempts.  I used http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html to analyze the files on my system.  I even bought the software UniBlue Registry Booster for $29.99 in order to eliminate the problem... and I'm here!

  I can't add a PictBridge compatible printer, not to mention my Samsung CLP 315, until the spooler service running.  I can't turn on the spooler service because Windows will not let me... I'm unable to print and I am unable to do anything.

  I'm a PC and I want to that I was a MAC right now!

  Can anyone help?

  most likely the spooler is a failure after install the driver.  Because the spooler is not running, you will need to check what drivers. print processors and language monitors that the spooler is trying to load.  Bruce has a few instructions.  I guess you ran the utility software troubleshooting print already.

  http://members.Shaw.ca/bsanders/CleanPrinterDrivers.htm
  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• Envy 13 d001ne: cannot install Windows 10 from usb flash drive

  Summary of the problem:

  The laptop SSD has a GPT format. I am trying to insall a Windows 10 ISO I have on it from a flash drive. Formatting a usb startup as TPG manually or using Rufus drive will not make the unit visible non-traditional mode. Formatting the drive in the MBR on the other hand I cannot install on a GPT disk.

  I've tried everything. I disabled and enabled secure boot. I updated the BIOS to the latest revision F.35.

  What's wrong?

  The ISO had problems with it. I used another and then I could install Linux Mint and Windows without any problem.

  I solved my problem here.

• Why USB-6501 does not install on Win7?

  We are in a process of migration of the old XP machine test system to the new system of Win7. All but got properly installed USB-6501. After you install LabView / DAQmx and connection USB-6501 windows could not find the drivers for this device (poster the exclamation sign on the icon of the device in devices and printers). MAX 4.7.4 detects either of the device. I looked for similar scenarios on the Forum OR and abroad and tried the solutions proposed. Nothing worked for me. I know the issue isn't with the USB-6501 material because it is functional on the old system. 4.7.4 MAXLE Win7 system detects a very well (GPIB-USB-HS) different USB device, but not for USB-6501.

  I hope someone can help us identify the problem that we have struggled with for some time. Here are the differences between shipments of software on two systems:

  Old system:

  OS - XP SP3

  LabView - 7.0

  DAQmx - 8.0

  VISA - 4.4.1

  MAX - 4.5 (detects the GPIB-USB-HS and USB-6501.) Status on 6501 LIGHT flashes continuously)

  New system:

  OS - Win 7 Enterprise

  LabView - 7.0

  DAQmx - 9.2.2

  VISA - 5.0.3

  MAX - 4.7.4 (detects only GPIB-USB-HS. Status on 6501 LIGHT flashes 3 times and then road)

  Germano,

  The device has been appear in Manager devices, but with the yellow exclamation mark for no drivers found/expenses. Update drivers on the property page does not help.

  So yesterday I spent most of the day removing all facilities OR according to the instructions, I found in this forum. Then I reinstalled the software OR in the order following, restarting after each installed:

  (1) LabView 7.0

  (2) DAQ 8.0.1

  (3) NEITHER-488. 2 (v2.30)

  (4) connected USB-6501 first. The installation of the device has gone well and is now detected to the MAX!

  (5) connected GPIB-USB-HS. Scanned for changes on the hardware, peripheral GPIB presents itself to the MAX, but with a weird name announcement its INF file on his behalf. See the screenshots below:

  GPIB device incorrectly installed:

  

  GPIB device properly installed:

  

  The strange thing is that this GPIB device was fully functional on my previous installation (see attachment max_report_3-23 - 11.pdf), now reinstall after its unusable (see attached max_report_3-24 - 11.pdf). Looking for GPIB instruments to help Max returns no result, but if I reconnect GPIB-USB-HS to the old system of PC all instruments are detected (for instrument scan error message see attached MAX after reinstall.jpg).

  That my new problem is not related to USB-6501, maybe I should open a new forum thread.

• Cannot install laserjet pro p1102w printer, usb error, please help?

  I was able to print things in the past using the USB of my printer. After I reformatt my computer, I tried to plug in the usb from the printer to the pc, the usb will not be installed, it has an error message that it could not reconigze the computer or something, I have a triangle of yellow warning next to the serial bus controller universal usb. I tried the update, but it cannot update, I tried to plug and plug it into the usb, I tried manually install printer in devices and printers, and yellow triangle still in the pc. Please help, I have a home edition of Windows 7 64-bit. And I recently change my network wireless after reformatting, but that any prior to reformatting, cause I have change the wireless network and still able to print, but after I can not format. Help, please

  Hi cowmanchess,

  It seems that you are having problems with your USB port on the computer.

  Have you tried using a different USB port on the computer?

  Have you tried a new USB cable?

  How long is the USB cable you are using?

  You have a USB hub between the printer and the computer?

  Unplug the USB cable and then download the software on the link below. Wait that the installation of the software requires you to connect the cable. Let me know if you get the printer installed?

  Driver and software of HP LaserJet Full Feature

• 7130 on the new computer with Win7 usb auto installation, cannot now w/ethernet network

  I have a 7130 Officejet which is connected to my network by ethernet.  I just bought a new computer with Windows 7.  This printer does not have a downloadable driver for Windows 7, but the drivers that are compatible with the printer are delivered pre-installed on Win7.  The problem is that I have to connect the printer by USB to activate and install the drivers, which I did.  I don't see a way to restore a connection to the printer via ethernet after the use of the installation of the USB driver.  This will be necessary, because I'm changing more than one computer to Win7.

  OK, assuming that the printer is connected to your network with an IP address valid:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Cannot install Win7

  Hey everyone, I'm pretty knowledgeable when it comes to such things, but I'm totally stumped here.

  I have an Inspiron 15 3537 which comes preinstalled with Win8. I hate it, so I want to install Win7.
  My first question was that the laptop wouldn't start my Win7 DVD, but after doing some reading, I read that I had to turn off activate/UEFI Legacy - that worked. However, now that I formatted the laptop HARD drive, I can't choose the partition on which I would like to install Windows. I get an error message that says something like "Cannot install on this partition as the GPT is" or something like that.

  I did some reading up on top of that question and it seems that I have UEFI enabled, but if it is enabled, I can't start the DVD.

  Someone pleeeeaaaase help!

  It's ok, I fixed it.
  In the configuration screen, I press SHIFT + F10 and then access diskpart to clean the partition. All sorted now.

• Cannot install Windows 7 USB

  When you try to install Windows 7 USB, I get the following message:

  "Setup could not create a new partition or system to locate a system partition. See logs of installation for more information".

  I'm trying to do a clean install of Windows 7 on my new laptop that does not have an optical drive, so I have to use a USB key. I read on the forums countless that USB is the problem - Windows 7 will not install with a connected USB drive, because blah blah can't install on a disk that can be removed. Or something. Only I do not want to install on the USB. I'm installing FROM. So I HAVE it up.

  How can I fix it?

  Hi TheOneGuy,

  Looks like you did some research, so I apologize if it is redundant.  Did you see the next post?  It is quite similar to your question and has a possible solution:

  http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install Win7 64 bit only Win7 32 bit

  Hi I'm new on this and don't know if this is the place to ask questions so here I.

  I'm trying to install Win7 64-bit using my HP dv7 laptop has Win7 64 bit on it, who can't seem to install only win7 32 bit

  How to install Win7 64 bit

  also how can I increase the size of my C drive of 20 GB for a larger size

  I am usiing Vmware Workstation
  Worm 6.5.3 build 185404

  André Pett wrote: resize the virtual disk is possible within the parameters of the virtual machine HARD drive

  The OP is using VMware Workstation 6.5.3, and there is no option in the user interface in the virtual machine settings to increase the size of the hard drive in this version and must be done from the command line using vmware-vdiskmanager.

  and the type of disc is not the IDE.

  Not sure why you would say that as an IDE hard can be extended with a vmware-vdiskmanager or virtual machine settings as appropriate in future versions of VMware Workstation.  I did several times that I can remember.

• Cannot install Windows 7 on an external hard drive

  Mr President, I want to install win7 in external hard drive operating system, but I get an error message saying "windows cannot be installed on this configrationof installation or installation on the disk drive, connect to a usb port or ieee 1394".my contact no. is 09660166247 and my email is * address email is removed from the privacy * help

  Cannot install Windows 7 on an external storage device. You must install it on an internal storage device.

• 15 - s103tx: cannot install drivers

  I just bought this computer of India about a week ago and I installed windows 7 ultimate on the same (64-bit). I downloaded all the drivers I could find on the HP website and tried to install each of them one by one. I still cannot install two drivers (like what they show in OTHER DEVICES in the DEVICE MANAGER)

  1 3D video controller

  2. universal Serial Bus (USB controller)

  Under the display adapters, I see Standard VGA graphics adapters. I tried to install the graphics drivers several times but always the same question.  I also tried to install the drivers USB 3.0 several times but always the same question as welI. I'd appreciate strongly any n all the necessary help on the same.

  Hello:

  See if it works...

  1 install the Intel chipset driver and restart.  The second file on the list is the file of execution (exe) auto.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816

  2. install the Intel HD graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24348

  3. install the graphics driver nvidia and restart.

  http://www.nvidia.com/download/driverResults.aspx/81392/en-us

  Try this driver usb3...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=22824 & lang = eng

• Cannot install any os in a hp pavilion dv5 - 1120ev

  Hi, my friend has an hp pavilion dv5 - 1120ev, he had top, pre installed windows vista. He asked me that if I could make the computer faster, so I told him, of course, you need to change OS to do this, you must install windows 7, I said. So I took with me, put windows 7 dvd, boot from the cd/dvd drive, deleted all partitions, even the recovery partition (I didn't know it came without a copy of disk recovery tools), partitioned the drive into 2 two new partitions, formatted and continued to install the os on the primary. The dvd that I used has all versions of windows 7, 32 and 64 bit, tried all, it gets stuck on the process of expansion, to 0% files (only with one version, she was 14%, I can't remember which), and it gives me the "windows cannot install required files. the file may be corrupted or missing. "Sure... error code: 0 x 80070017. Then, I tried with another dvd with winodws 7 ultimate, same thing. I also tried with the disc do not split into two, one partition, just in case windows is having problems expanding all of the files, just in case, same thing. Then I thought it was a bios thing, he had to be updated, which to be honest there cause of the version it is F.0C, and in the support section of the hp site, I found a newer version of it, which is also described as necessary for the latest operating system upgrade. I thought wow, that's it, I found it, I will upload a version of it bootable, version bootable cd to be precise, cause the bios version there back does not support booting from usb devices, I'll update it and install the operating system. NOPE. The site has an exe of the bios version. I tried to make a disk bootable with the bios in there (with the option of nero boot disc), I guess that I've not done it right, it could be a solution, but I could use some help on this. I also tried to install windows xp, so that I can install it the update of the bios, the same thing, I get the same error, only with the old blue sceen scholl. Finally, I tried to install windows vista Home premium, just in case the bios for a reason any has only accepted this operating system, no way, same error again! So now I'm not stuck wth no operating system, a pc unusable, nothing can be installed on it. I asked my friend that if the cd/dvd drive had some kind of problem, he said, had no problem with game discs, their loading and installation of games. Please HELP I don't know what to do! Thank you

  Nevermind, I managed to solve the problem by taking the hard drive, put it in another phone and the windows installation, then put it back. It worked like charm, so the problem is 100% on the DVD player.

  Thank you

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.