Similar Questions

• Boot Camp Assistant 3.0 for Windows XP

  I need to install Windows XP on my Mac mini (compatible with Windows XP DVD early 2009) since it is the only OS that will run a specific software that I need. I have Snow Leopard disk but does not know how to access the wizard Boot Camp 3.0 (apparently the only one that works with Windows XP) on this subject. I am El Capitan 10.11.6 running and when I plug the drive, I have been informed that the Setup program no longer works. When I search "optional downloads" I can find no sign of Bootcamp 3.0. I would be grateful for all the useful tips for how to find 3.0 Boot Camp Assistant. Thank you.

  Configure Windows XP Boot Camp is possible in 10.6.8 and earlier versions. If you wish, use a program like VirtualBox to run it in emulation.

  (143851)

• El Capitan and Windows 10 Boot Camp Assistant

  Hi, this is my first post so apologies if I've left out anything important. Let me know and I'll add the necessary details.

  Fast, I have been using Windows for years and I wanted to get into Apple and finally last month made the leap. I have a brand new MacBook Pro with 16 GB of RAM El Capitan - 10.11.4 running. However, I am having a lot of problems with the creation and installation of 10 Windows using Boot Camp.

  I had this work with Windows 10 times but made some fundamental mistakes. I resized the partition windows using a windows product so that I could add another partition. This seemed to work and I used it for a short time BUT when I tried to boot into El Capitan would not and that it would only boot Windows. After reading on what I see now that resize the windows from windows under Boot Camp partition is a no-no. lesson learned!

  To actually do things once again, I removed the windows partitions using disk utility. (Again I see now that it is an another no-no that I'd
  used Boot Camp Assistant to remove Windows!) Eventually however, I managed to get to El Capitan, working on the single partition, it is now again works fine and as far as I can tell without any problem.

  After having to go that if I went back to load 10 Windows using Boot Camp. All works until the final start in the section windows it:

  • Creates the separate windows partition
  • Load the ISO file
  • The Windows Support Tools downloads
  • Runs the ISO file and everything looks good... see below: (apologies for the poor quality of the screenshots)

  

  Then, during 'Finish Up', I get an error window:

  

  "Windows has no prepare the computer to start the next phase of the installation." To install Windows restart installation. »

  I tried many things such as to download the Windows ISO file again, running SNC and LANDAU after removing the Windows partition using Boot Camp Assistant and ensure that all other connections to the MBP is deleted except WiFi and get always the same message. As the whole process takes a few hours and tried to work through this for some days now, I would really appreciate some advice/help here for this issue very frustrating sorted.

  Thanks in advance

  Ian

  OSX backup via TM boot in the recovery of the Internet, erase your entire internal drive, restore the TM backup, run SMC/NVRAM reset and try to re - install W10.

  Your problem with remainders of W10 floating outside the Bootcamp partition, which cannot be properly cleaned when THE is used to delete a partition.

• How to recover my boot camp assistant after upgrade windows 10?

  After the upgrade from win 7 to 10 I made the Apple «»
  updated software". Pop up told me that an update of boot camp (Assistant)? 4.x to 6 will be... After 3 h of any improvement in the process, I rebooted the system.

  Everything works fine (boot mac and windows)... JUST order apple keyboard etc. in windows Wizard is gone!

  How to get it without risking fu * k towards the top of my installation of windows?

  Thank you very much!

  C.

  Please download BC6 driver packages on an Apple's USB key with the help Wizard of BC as shown...

  

  .. .and run setup.exe from the Bootcamp folder. Please see Bootcamp 6.0 driver install interrupted if you get stuck on the installation of RealTek.

• Boot Camp Assistant does not start the installer

  Hi all -

  I'm trying to install Windows 8.1 or 10 Pro on my mid 2015 Macbook Pro. I made this countless times on before Mac computers, including my 2013 previous Macbook Pro without problem. However this laptop seems to have problems during the process. Or I do something wrong and don't understand how it works now.

  I started Boot Camp Assistant, walking through the steps, divide the disk, etc. He began the restart process, then it restarted,... then I was back to my Mac. There was no indication that he was still something, but I let it sit for a few minutes. When I was confident it would do nothing, I decided to restart and hold down the 'Option' key on startup to select the Windows disk...

  OK just thought of this, but I will continue to write this question: Boot Camp Assistant request now an ISO standard. I still remember having to do this from a USB or CD player. I hold down the 'Option' and select the DRIVE or a CD drive but since I do not have either, I can't select it. I thought it was a problem in which nothing appeared on the screen except Macintosh HD.

  So I guess that the problem comes from my ISO file? I made them using the instructions from Apple of physical disks (Windows 7 and 8.1, but my laptop does not support 7). I will try to download Windows 10 Microsoft site, according to Apple.

  Anyway, I looked in the disk utility and found that BOOTCAMP was created successfully. I used Boot Camp Assistant to delete the partition and to combine the disc again. I then tried the whole process, once again, but with the same results.

  Still, I will try with a new ISO directly from Microsoft...

  Thanks for any input in advance.

  -Tony

  1. 2015 macs do not use a cable USB or CD/DVD to install Windows.

  2 creates a partition on the internal drive called OSXRESERVED and puts the content of the ISO and the drivers of BC on this 8 GB partition and boot from it.

  3. Please see https://help.apple.com/bootcamp/assistant/6.0/ for more details.

• Boot Camp Assistant not showing options

  I want to uninstall Windows XP or just delete the bootcamp partition, but the page select the Boot Camp Assistant tasks offers only 3 choices of n/a:

  1. create a Windows 7 or later install drive

  2 download the latest Windows support software

  3. install Windows 7 or later

  Selection 3 does not include 'delete an existing partition to Windows' so check this and clicking on continue I get "installation disc is not found." Insert W - XP installation disc and clicking on continue evokes a 'create a Partition for Windows' and I see a partitioning scheme (but I am unable to adapt to it) and only one choice for "install".

  My clone my old drive SSD did not save the partition? The scheme of partition in the previous step is proposed as opposed to real?

  Thanks in advance for any help!

  1. check that the Windows XP Home edition is not a virtual machine.

  2. after the release of order OS X Terminal - diskutil list.

• The Boot Camp Assistant problems

  I'm trying to install 10 Windows on my MacBook Pro 13.3 2015 "running Mac OS X El Capitan (10.11.2) but I can't not (for software that is not supported by Mac OS X). I tried several times but it still says that my disk space is not enough (don't remember the exact words in the error message). I then opened the Boot Camp Assistant in the terminal and saw that it only recognizes that the reader would have 4 GB of free space available (I have a 500 GB SSD and 130 GB is used) but some insane amount about 140000000000000 GB has been used (what?). When I check in disk utility, I get also some suspicions that Boot Camp Assistant selects the Macintosh HD partition, instead the real player. In the Boot Camp Assistant, I can choose the size of the partition (I want let 370 GB for OS X in the Macintosh HD partition and get 128 GB for Boot Camp / partition Windows 10). I can't get this to work and I am grateful for any help!

  Windows Installer can generate false messages on a disk space. Do you have any connected external storage when you try to install Windows?

  If the problem persists, run the following two procedures and try again.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

• MacBook Air (early 2014) El Capitan impossible to install Windows using Boot Camp Assistant 10

  The ISO image has been downloaded from Microsoft.

  I was using a 8 GB USB (although not a brand new, but erased and formatted by disk utility).

  When the State of the task of the Assistant Boot Camp completed "Windows Backup Software Support", Mac restarted.

  As we see from the videos of YouTube, the Mac should start in a configuration of Windows but my screen as usual!

  Still, he resumed the partition (in my case 40GB) but it is empty!

  Can even suggest what is the problem here?

  

  You can try a different USB2 flash drive? What brand is the current USB?

• Problems installing XP Pro (SP2) on Boot Camp Assistant

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: reading through related articles and found only tips, no responses. I am trying to install a full version of XP Pro (service Pack 2) on Boot Camp. Disk set up until the moment where I should be able to choose the second sequence of partition. Message: Windows Setup > Disc Error > press any key to restart, which it doesn't. It freezes the computer and quite bored. Mac Tech traveled with me and have decided that it is no longer their responsibility and told to talk to Microsoft. Help XP ended on July 13, 2010. Someone has an answer and not advice?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You can reefr this links:

  http://discussions.Apple.com/thread.jspa?threadID=2570296

  http://discussions.info.Apple.com/thread.jspa?threadID=2519794&TSTART=46

  http://forums.MacNN.com/104/alternative-operating-systems/352250/boot-camp-disk-error-press-any/

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;812247

  Let us know if this does not help.

• Error Boot Camp Assistant

  Hello

  I'm trying to install 10 Windows on my Mac 2014 and I get this error message. Any suggestions as to what I should do?

  

  1. can you check the MD5sum of your ISO?

  OpenSSL md5 Win10_1511_English_x64.iso

  MD5 (Win10_1511_English_x64. ISO) = a0d4271b7537732a060909fd39d54829

  2. you may need to perform the following two procedures.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

• Wizard Boot Camp - cannot locate ISO

  Hello!

  I'm trying to partition the drive of my MacBook (OSX 10.9.5) to install Windows 10. I have the. ISO on my office file, which seems to be intact:

  

  Boot Camp Assistant will recognize the ISO. I get this message:

  

  I have an installation disc to install Windows 10? I was under the impression that the ISO file would work...

  Help!

  Thank you!

  Your model does not offer using a USB Installer. You must use a physical DVD.

  Windows 10 can be directly installed, with the wizard of BC, on your specific Mac Help. See a list of Macs that support W10 in using 10 Windows on your Mac with Boot Camp - Apple support . However, you can install W7/W8.1 and then run an upgrade on the spot to W10. Be aware that there are no drivers certified by Apple for your specific model, if it is not listed.

• boot camp and windows 10

  I'm trying to install 10 Windows with Boot Camp Assistant. I'm exactly as shown in all directions. I have a 2012 end iMac 21.5 ". It has a 1 terabyte internal hard drive. I've updated to the latest version of Mac OS x. I downloaded a legal Windows 10 professional image, although it seems not matter since I can't install it. Anyway. I followed all the instructions of the Boot Camp Assistant. I use an external hard drive for WININSTALL. Wizard Boot Camp works very well until it's time to create the partition on the hard disk called Bootcamp. It creates the partition, but does not do anything in this partition. Wizard Boot Camp attempts to boot from the new partition, but obviosly, there is nothing there. I tried to start the WININSTALL disc, who starts and wants to install Windows 10, but he cannot or will not be installed on the Bootcamp partition. You know what says the error message, because others have told you what he said, so I won't repeat. Obviously, Boot Camp Assistant does not use GPT, but rather of MBR to create the Bootcamp partition. I have tried many, many, many times to use Boot Camp Assistant to install 10 Windows internal hard disk, but each time he did exactly the same thing. I guess I'm crazy for trying to do the same thing so many times. Of course, there is something wrong with my iMac, because it seems that others are able to install Windows 10 on their iMac. So, would someone please tell me how to fix the problem so that I can install 10 Windows internal hard disk from the iMac?

  fronw wrote:

  I use an external hard drive for WININSTALL.

  You need a USB2 Flash 8 + GB drive. You may use an external HARD disk, it is still problematic.

  It creates the partition, but does not do anything in this partition.

  BCA is not supposed to, until the Windows Installer starts and copies the files to the internal drive to put Windows on the internal drive. WININSTALL contains all the files needed to install Windows.

  I tried to start the WININSTALL disc, who starts and wants to install Windows 10, but he cannot or will not be installed on the Bootcamp partition. You know what says the error message, because others have told you what he said, so I won't repeat. Obviously, Boot Camp Assistant does not use GPT, but rather of MBR to create the Bootcamp partition.

  EFI boot needs a GPT disk, the BIOS legacy mode needs a hybrid MBR (collection on a GPT disk standard). Your Mac 2012 preUEFI supports only the MBR properly. EFI boot not work correctly and cause driver problems.

  I guess I'm crazy for trying to do the same thing so many times. Of course, there is something wrong with my iMac, because it seems that others are able to install Windows 10 on their iMac. So, would someone please tell me how to fix the problem so that I can install 10 Windows internal hard disk from the iMac?

  Run the wizard of BC and delete the current partition. Disconnect the external storage, perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  Run the BCA and use a flashdrive USB2 (not a HARD drive). The USB key will be erased/formatted. The content of the ISO or Windows 10 DVD will be copied on this flash drive with drivers Apple supporting restart environment that supports your keyboard and mouse and display. Do not interrupt the installation in any way using the Alt/Option key.

  See also https://help.apple.com/bootcamp/mac/5.0/help/ .

• Boot Camp - boot disk cannot be partitioned or restored to a single partition

  Hello

  Would really appreciate some help on this!

  I tried to install Windows 7 on my iMac 2015 but during the installation of windows it guests that the partition must be formatted in a different way.

  Now when I try to use Boot Camp once again, I get this message:

  The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows.

  The problem is that I can't erase the Boot Camp Partition in any way using disk utility.

  If it's any help - it is the diskutil list:

  haraldsiMac: ~ the haralddegraaf list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage fusion 1.7 to disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS bootcamp 252.8 GB disk0s6

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage fusion 121.0 GB disk1s2

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS TB Fusion + 1.7 disk2

  Logical volume on disk1s2, disk0s2

  0D7254CA-C937-4A69-A2AA-AC689844B16F

  Fusion unencrypted drive

  / dev/disk3 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: boot Camp + 1,2 GB disk3

  haraldsiMac: ~ haralddegraaf$

  haraldsiMac: ~ haralddegraaf$ sudo TPG - r show/dev/disk0

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 3394638832 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  3395048472 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  3396318008 16782536

  3413100544 493666440 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  262151 3906766984

  3907029135 32 table dry GPT

  3907029167 1 dry GPT header

  haraldsiMac: ~ haralddegraaf$

  The Macs listed to install Windows 7 and previous versions on your Mac with Boot Camp - Apple supported support W7. 2015 macs don't support W7.

  The only supported method to remove Windows from a Fusion using Mac drive is Boot Camp: Remove Windows from your Mac . Do not use disk utility.

  You seem to have tried a deletion of THE (not deleting a partition), at least once. Your BC partition is now a HFS partition. Convert it back into a FAT32 partition on THE and then try to remove it by using the link provided.

  If you are unable to remove using BCA, then use the steps of the Re: doesn't have windows via bootcamp 8.1 installation .

• WiFi disabled in Windows Boot Camp 10, can not reinstall the driver

  Running an end of 2013 the MBP 15 "retina

  I got 10 Windows Boot Camp installed for more than a year without difficulty. But suddenly, my wifi doesn't work in Windows 10. He could see networks and said it was connected, but it has never been an internet connection.

  Assuming that it was the result of an update, I

  1 uninstalled all Windows regular updates that I can

  2. uninstalled the Broadcom driver

  3 downloaded the last Boot Camp Assistant WSS and installed

  But now I can't reinstall a driver for the Broadcom card! I tried to install WSS, but the network card remains in my device without a driver manager. So I tried to install the individual installation files in the folder of Broadcom. Still did not work. I even tried to extract all files Broadcom installation and manual installation of all the drivers. Windows 10 seems to recognize that the "ac" driver is the right, but always tells me that the driver installation failed without giving details.

  What else can I try?

  At your facility in W10 a W7/W8.1 update?

• Can I do a repair disk for my 10 boot camp windows installation?

  I installed boot camp using the boot camp assistant and not from my own installation disc.  It is provided in the boot camp assistant.  Sometimes I can't start windows and getting a bad_pool_header error.  I am asked to insert an ERD.  How can I make or get a repair disc?  When I open windows and try to make one, I am informed that I can not with this version of windows 10.

  There is no repair under OS X disk to repair Windows. You must use your Windows installation for this disc. Or find a Windows program for such a purpose.