WIN8 not find ssd on e1 - 472

Similar Questions

• Can not find SSDS in Satellite S50-B-15N

  Hello.

  I just bought a S50-B-15N Satellite, which is supposed to have an 8 GB SSD and a 1 TB drive.

  I can see the hard 1 TB but could not find anything to do with the SSD drive in my computer or in 'manage the device '.

  Anyone got any ideas?

  It seems that the S50-B-15N Satellite was released in the United Kingdom, and according to the website of specification for Toshiba laptop, the laptop was equipped the 1 TB + 8 GB Solid state drive Hybrid (SSHD)
  http://www.Toshiba.co.UK/laptops/sat...ITE-S50-b-15N/

  The hybrid propulsion system (also known as the SSHD) is a physical storage device that combined flash Solid State drive (SSD) of NAND with hard drive (HDD) technology.
  https://en.Wikipedia.org/wiki/Hybrid_drive

• Example: Pavilion dv7-4142eo: Bios can not find my new SSD

  I used http://www.crucial.com/usa/en/systemscanner and chose the SSD which should be usable in my laptop

  MX100 crucial SSD 512 GB 2.5 "7mm.

  I have used Acronis and saved my old system to a 3.5 500 GB that I put in an Icybox with esata.

  (Another method may be to use usb2 and clone the HDD of old to the SSD but with acronis and usb2, it would take 5 to 6 hours and so I have not tried this.)

  The Acronis cd boot I found the SSD and Esata and restored the backup of the old harddrive (from esata) for the SSD.  It seemed to work fine, but when I tried to start without the boot cd, I got the message "insert a boot disk".

  The I looked in the bios and could not find any hard disk (SSD).  Now, I'm out of ideas and hope for help here.

  My bios is titled: InsydeH20 Setup utility

  Below (details):

  The F.14 BIOS version

  Editor BIOS: Insyde

  I have a newer version of the bios?

  How can I upgrade the bios version?  As I already only the SSD into the laptop, should I put in the old hard drive before I can upgrade the bios or is it possible of this from a USB hard drive and running windows?

  I think I find a newer bios's http://forum.notebookreview.com/hp-pavilion-notebooks/595505-current-hp-pavilion-bios-releases.html

  This? ftp://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49569.exe

  My prosessor is AMD Dual Core IIP340 2.20 GHz prosessor.

  I solved the case.

  Method:

  1. 2010 upgrade to the latest bios

  2 SSD connected with usb2 laptop.  The driver has been installed.

  3. Acronis used to start the cd

  4 SSD equipped laptop thei

  5. connection with the old HDD Usb2

  6. start with the acronis cd

  7 cloning in the menu of acronis (from hard disk SSD) stop when finished

  8 turn off again the og boot cd

  Now I have 7-8 seconds before you see the password field and another 7-8 seconds before the end of the beginning.  5 sec to close.

  Fantastic.

  Thanks for any help.

• New drivers Conextant Audio can not find audio devices

  I have a lenovo u410 and when I updated to windows 8.1 like many people my home dolby cinema did not work.

  So, I tried to find the answer and fix it myself. I uninstalled all audio drivers and downloadled then the new but when I try to install it "can not find the device" I don't get any audio from my laptop and I don't know what to do.

  I'm confused, I have two audio drivers in my drives C: and D: (D: is a SSD) Please help I really like this laptop but I had a number of problems with it.

  And now that the fixed so I appriciate the help, but I don't really know what happened that makes get fixed haha

  Solid_Curver thanks, I am always impressed by the lenovos customer service

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• Windows 7 Setup will not recognize SSD

  I just built a new computer and I want to install 64-bit Windows 7 Professional on an Intel X - 25 M SSD 80 GB.  I do a fresh install on a new drive.  When I arrive at point in the installation of Windows 7 that asks you which drive I want to install the OS on, it does not show the Intel X - 25 M.  It will show my other drives, however.  If I unplug the other drives, it shows just a blank window instead of show the Intel X - 25 M.  I get a message saying that it could not find a valid signed driver.  I bought the retail version of the SSD, not an OEM.

  I use a card mother Gigabyte GA-X58A-UD7 and an Intel i920 CPU.  The BIOS of the motherboard has no problem detection and identification of the X - 25 M.  I have the X - 25 M configured as an IDE.  I updated the firmware of the SSD, but it did not help.

  Windows 7 compatibility page shows no problem of compatibility with the X - 25 M, but apparently it needs a signed driver, and I don't know how to get a.

  Any suggestions?

  It shows the SSD at all? I would check to see that it is indeed to be picked up by the BIOS, and if not, check the cables.
  Sometimes, the Windows installation can chuck a fit when it detects a disk with a sector of boot/MBR not valid and won't install it. To resolve this problem, you can try the following
  1. start Windows 7 disc.
  2. when the Welcome screen is displayed on the Windows installation, press SHIFT + F10, which will display a command prompt.
  3 type 'diskpart' (without the quotes) and press ENTER.
  4 Type "list disk" and press ENTER.
  5. If all goes well, you can see your SSD in the list. You should see a number identifier. Now type "select disk X" (where X is the number of your SSD) and press ENTER.
  6. type 'clean' and press ENTER. He will write an empty MBR, YOU WILL LOSE ANY DATA ON THE SSD if you had anything on it.
  I hope that one of these tips helps you:
  )

• Help! During the new installation of windows 8 from windows 7, received the error message "could not find readers.

  First post: I have a hp Envy 4-1030us ultrabook comes with windows 7.  from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions.  factory reset which has worked for 2 months but started to do it again.  tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use.  I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself).  When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'.  Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive.  in windows 7, these discs are seen without problem.  What I am doing wrong?  Why install it windows 8 can't see the internal drives?  Thanks in advance for any help you can give.

  Hello

  See the links below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-install-unable-to-find-my-SSD-hard-drive/e54ff7bc-50a9-4e05-85cd-542ca71f621d

  http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html

• Computer failure, hard drive readable: can not find the 5 Lightroom Catalog.

  Computer failure, hard drive readable: can not find the 5 Lightroom Catalog. Help appreciated.

  I used 5.3 LR on Win7, never pay attention in the name of the catalog used. My photo files were on the same physical hard disk D: partition.

  Now that I have a new computer Intel NUC, with Win7 installed on drive C: (SSD M.2), I plugged my old drive hard drive E: (old C :) and drive F (old d :))

  I have re-installed LR 5.3 and also upgraded to LR 6, , but the problem is that I can't find the catalog I was using with LR 5.3

  I searched for *.lrcat and see all previous catalogues lightroom starting with LR 2, 3, 4, 5, getting bigger and bigger, but not catalog 5 including the current date.

  The catalog would have another name or extension?

  I have the old C: drive. Is there a config file that would confirm where the catalogue is supposed to be?

  Help!

  HM, it is clear that it is not found on your old C: (so E :). )

  And there is no config file to tell where to find the catalog to Lightroom. It's just that the catalog is in the place you choose (most of the people chose to have the catalog to the location by default...).

• First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

  Help, please!

  Hi Brigitte,.

  Go to the following location and rename the folder in the name of old_folder

  User/user/library/Application Support and rename the Adobe folder

  User/Library/Preferences and rename the Adobe folder

  Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

  Make sure that you are in the library of the user if you are not sure to check out the link below.

  Access the hidden user library files. Mac OS 10.7 and later versions

  Kind regards

  Vinay

• Sierra WiFi downloaded to restart ElCapitan OK on Sierra Message can not find material Wi - Fi, that it still works if I returned to ElCapitan?

  Sierra Wireless downloaded ElCapitan OK. Restart on the Sierra.  Message received! Computer can not find the Wi - Fi equipment? It still works if I returned to ElCapitan! Wi - Fi is not compatible, it is possible to access the internet if I use a cable a very long cable that extends the House and stairway access.

  What model Mac Pro?

  Wifi originally came with the Mac Pro?

• Siri does not find the files on my external drives

  Hiya:

  Just updated to Sierra of MacOS and I try to use Siri to search for files on my computer and as the title suggests, Siri spitting not files on my external drives (both connected via USB 3 on the back of the iMac). I tried to turn on Siri/off, Spotlight is not all excluded files, I tried signing in/out of my iCloud account. I tried to create a new user account on my Mac (which will not find anything). Permissions on my external hard drive seem ok: read/write is enabled for me, all the world and admin; "ignore permissions" is turned on.

  I'm starting to think that this is a design limitation of the software. Someone else using Siri able to search for files on your external hard drives?

  As near as I can tell, unlike the Finder and Spotlight, search Siri does not check for external drives.

• Downloaded an album that came with a video. Can not find anywhere and he says just bought when I search in itunes

  Could not find a video that came with the purchase of the album

  It does not appear in my library

  Hello Tracy z.

  Thank you for using communities of Apple Support.

  I see you have had trouble finding the video accompanying a downloaded album. This problem should be solved now and you should be able to get that video now. Please try locate this video.

  Best regards.

• Can not find templates of pages in the file 5.6.2

  I recorded a Pages file as a new model, using the dialog Add to the list of templates . In the Pages, the new model appears in the model picker as 'Model Tech Blog'. Now I want to copy to another Mac. But where the actual file? I tried to use SpotLight to search the model name, but the projector could not find. I then looked at several places on my Mac where other people seem to think it should be...

  I looked here:

  / Users/Mike/library/containers /- but there is no file called com.apple.iWorks.pages

  And here:

  / Users/Mike/Library/Application Support - but there is no folder called iWork

  And here:

  /Applications/pages.app/Contents/resources--qui lists 807 items, but none of my models

  And here:

  /Applications/pages.app/Contents/SharedSupport/templates--qui lists the 114 elements, but none of my models

  Of the above, you can see that it is not in one of the usual places. So where's my guarded model file?

  Models of 5 user Pages are stored in:

  ~/Library/containers/com. Apple.iWork.pages (right click, view the contents of the package) data/Library/Application Support / User Templates.

• MacBook can not find bluetooth devices

  I just bought a new Macbook.  He can not find bluetooth devices.  The device is fully charged and so forth.  He saw the mouse for a fraction of a second, but then he fell.  I tried other bluetooth devices.  It does not find.

  I had this problem too, turn on the Macbook and off is your best bet. But if this does not work, you can go into the settings of your macbook. Settings - Bluetooth - advanced and ensuring that all things have been checked. Hope this helps, good luck to you.

  ~ Michael M

• Could not find the time stamp option in the historic window

  Could not find the option "date of visit" in the historic window as described in "ehow" for Firefox

  This is the most recent column visit.

  Have you looked in the menu ' views > show columns "in the library?