Window film LOSER-lists contained only place holders, not actual video

Similar Questions

• When I add a video on my calendar, it allows only the audio, not the video. It is in MOV format.

  I'm working on my first project with elements first, and when I add a video to my computer, it will add it only for audio, not the film section. All my files are in MOV format. I am able to open the same file in Microsoft Movie Maker, but not in the first of the elements.

  geigerlau

  Your specifications video camera and your lack of QuickTime presets, it's almost a certainty that the installation of the first Elements needed as QuickTime will solve your problem.

  What could be your problem is the use of a video codec MotionJPEG for your video. Your camera seems to offer MotionJPEG video codec, but only as an .avi file. The video codec that goes with the file from your camera .mov is H.264. Thus, with an extension of the .mov file, you do not have the question common to Premiere Elements MotionJPEG any version.

  Please let us know if the installation of QuickTime works for you. It should based on what I've read online on your camera and knowing the requirement of Premiere Elements for QuickTime.

  Thank you.

  RTA

• How can I make my friends list in windows live for my viewing only and will not be shared with any of my friends

  I want that my list of contacts and friends to not be seen when people (including my friends) light up on my profile page on windows live or windows live messenger

  Hello

  they will help you with your questions/problems Messenger when repost you the link below in the Messenger forums

  http://windowslivehelp.com/product.aspx?ProductID=2

• Windows Live Mail list box shows, but does not open.

  My computer was just came back from the repair shop after to have removed and reinstalled Firefox, because of the freezes, virus etc..  Everything works OK except Windows Live Mail, my main e-mail program.  (I can get email through the email of Roadrunner IP, but I prefer Live Mail).  The first message box says: "initialization of RSS feed support failed.  News FEED could not be updated. "When I close this message window, I see my list of incoming emails, but when I click on one, I see the message,"this is a problem when you attempt to open this message.  There was a problem.  Please try again. "If I try to compose an e-mail and click on 'To' to select a recipient, I get the message"Unable to choose the recipients."  If I click on the "Contacts" icon at the top of the window, nothing happens - as if all my email addresses are missing.  Any suggestions?  Thank you.  Laura

  Windows Live Mail is supported in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• First Pro exports only my audio, not the video

  I'm a beginner to this program, so please bear with me.  I'm in first Pro CC (2015.3) v 10.3, blue Fox on a PC with Windows 7 Pro. The Media Encoder is also Media Encoder CC (2015.3). When I queue to export the Audio/video file, I chose H.264 and AAC Audio.  The video and audio of boxes are ticked for export.  I have the game - high-speed selected Source and preset of Facebook.  Is the screenshot after I encoded the file, but I am able to see the process of Audio and video, while it exports the file.

  Here is the screenshot of my Premier Pro screen. I had created a couple of these slide shows before and everything worked very well.  Now for some reason, there is only Audio now.  I tried it with two series of photographs with the same results.

  Any help is appreciated and I apologize if this is a repeat problem, but I don't see anything that fits my situation specifically.

  When you are working in a new project (or new sequence) and you add the first piece of media in your timeline (sequence), if the media card to match the settings of the sequence, it will ask you "Do you want to change the sequence to match the media" and you have done this, no other way to get an image size of 4608 x 3456, which is not equal to any standard video format. Is also 4:3 and not 16:9 for the video output screen. So unfortunately, if the configuration of the sequence is bad at first, your project is built on a poor Foundation that will cause problems later when you try to export to a standard format.

  If you want to put the video on Facebook, that would be 1920 x 1080 or 1280 x 720 for instance (1080 p or 720 p). Your sequence should be created accordingly before adding any media. In Prefs or sequence by sequence, you can use the size value of the frame to have the media scale in sequence (photos/video will scale to fit the image).

  Try changing the size of the image in your sequence up to 1920 x 1080 settings. You may need to click on the pictures and also the value size of the frame.

  EDIT: also change the audio sample rate of 32000 to 48000 which is more standard and superior

  EDIT 2: If you put 4:3 pictures in a 16:9 frame, yes you get black bars on the sides. As the top and bottom of the pictures of the boat may be just the water and the sky in any case, you can change the image until it fits left to right, cropping the top and bottom which you can't miss anyway. Can also set vertically then necessary. Use the Adobe movement controls for these actions, found in the effect controls panel.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Satellite L505 - 10K - recovery disk contains only Windows 7 32-bit

  Hello, I have a question.

  I bought a Satellite L505 - 10 k a month ago. It came with Windows 7 x 64, 3 partitions (I don't know why, 3? seriously?). I tried to install Linux, delete the last partition, called 'Data' and I screw them completely. I used the recovery DVDs to bring the phone to default settings and I discovered the system recover is Windows 7 x 32.

  No idea why the systems are different?

  It's just a minor issue, I guess, the only bad thing is that the x 32 system recognizes not the 4 GB of RAM. I use now only 3 GB of RAM.

  Hi Cabo_Nobbdy,

  I think you should check your user manual and the specificaitions of your laptop first before starting a question. I founded the following information:
  + Operating system: Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery) and Genuine Windows 7 Home Premium 32 - bit (Toshiba-Recovery DVD) +.

  This means that the recovery for Windows 7 64-bit disk, you need to create by * you *!
  The DVD that came with your laptop recovery contains only 32-bit Windows 7, and normally, you can create the recovery disk using the Toshiba recovery disc creator. I put t understand why you didn't do it because after the first start, you get this message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  But now it s too late for that and you have to order a new Toshiba recovery disc yourself:
  https://backupmedia.Toshiba.EU/landing.aspx

• Where in Windows 7, the list of registered programs (IE, films which have been programmed and should be included) stored in the regestry

  Where in Windows 7, the list of registered programs (IE, films which have been programmed and should be included) stored in the regestry.

  What is the Win7 or Win8? Can we possibly this list to another partition such as set records even?

  background:
  If I could have HDGUARD (www.rdt.de) installed on the MC for my parents.
  Defines the system after each reboot back into a predetermined State.
  Actually a very good thing, but it just always go that the program may be lost.

  ----------------------------------------------------

  Oh sorry, die ich wurde im Englischsprachigen Forum Mehrkornbrot fits.
  Kann man auch eine question stellen, und wie kommt hin da man sleeps?

  SiteKiosk, which is essentially what HD guard, does not allow for this.

  You'd better watch the standard accounts that do not have access to the MCE.

• I have a key to windows 7 Professional sp1 debug/checked but I iso dvd only windows 7 Professional SP1, can I place the key to debug / checked on an ordinary?

  I have a key to windows 7 Professional sp1 debug/checked but I iso dvd only windows 7 Professional SP1, can I place the key to debug / checked on an ordinary?

  Yes, you can use it.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Reinstalling Windows Mail Contact List

  I had to reinstall my whole computer, because it crashed with an update of Windows 'stuck '.  I have my Windows Mail contact list saved on my C drive, and also have a CD of it.  I tried to import the list, but I can't make him - how can I put my contacts back in Windows Mail without having to re - type the entire list?  Thanks for any help

  I've never had the pleasure, it's just a JOKE. Assuming that you have saved the file containing the list of contacts, move it from the CD to the desktop. Right click on the folder. Properties and make sure it is not marked read-only and then try to import from there.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• My Windows 7 upgrade disk has only 32 bits. I want to install Windows 7 64-bit. What can I do?

  Upgrade to 64 - bit with this situation?
  A few years ago, I bought a PC which has Vista installed on it, but I was given a Windows 7 Upgrade disk to install Windows 7. I was able to create a clean install with upgrade disc. Recently, I discovered that my processor can support 64-bit, so I want to go to that. Problem is the upgrade disc contains the 32-bit version, even though I believe complete dics of Windows 7 contains both versions. It does not mean that I am eligible for the 64 bit version of Windows 7? It's terribly confusing.
  What are my options for installation of 64-bit? The 64-bit version can be downloaded or something? I even use the same product key?

  Will be the product key, I received with my job to drive upgrade with the 64-bit version, I downloaded?

  Yes.

  The key of Windows 7 works with 32 and 64 bit, but can only be installed at a time.

  You may need to use the phone activation, two methods to do this are below.

  1. call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. start by clicking on the start menu, and then type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4 Select the telephone activation option, enter the number, do not select all options and wait for a person pick up, then explain what happened.

  2. call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. open Windows Activation - click the Start button, right-click on computer, click Properties, and then click on the option change your key.

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated phone system.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. dial one of the available phone numbers listed.

  7. do not select all options and wait for a person pick up, then explain what happened.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Replace the previous Question on Windows 7 jump lists

  Previous question incorrectly referred to as Windows 7 Jump Lists rather than the Start menu lists.  I tried to delete it, but could not... Please disregard.  It is corrected below:

  With the Windows 7 Start Menu, number of items in the list of the default Start Menu is set to 10.  There are currently 10 applications in this list.  When I opened an application 11, different from those in the list on the Start Menu, I expected to be added to the list with the oldest list entry being deleted (by example, most recent, most former fate).  This was not the case.  When I click an app (PPT 2007) from the desktop, regardless of how many times I opened it, it was not added to the list of the Start Menu.  Only after you open in the all programs list it has been added to this list.  In addition, no matter how many times I opened Windows Explorer, whether by the bar of tasks or in the list of all programs, it is not added to the list of the Start Menu.

  The Microsoft online help States the following on the list from the Start Menu:

  "You will notice that, over time, the lists of the programs in your Start menu change. This happens for two reasons. First of all, when you install new programs, they have added to the list of all programs. Second, the start menu detects the programs you use the most and places them in the left pane for quick access. »

  First of all, what is adding programs to the list of all programs has to do with the list of the Start Menu?  If I install a new application, is automatically added to the start menu?  Second, what are the programs will be added to the list of the Start Menu?  You have to open 'x' repeatedly to be added to the list?  Are there exceptions to what is added to the list and if so, what are those exceptions?

  If someone can explain the details of how the list of the Start Menu is supposed to behave, I would be very grateful.  At the moment it seems inconsistent.  All of the default settings in the Start Menu properties that affect the lists are active (for example; ("Store and display recently opened programs in the menu start" and "Store and display recently opened items in the start menu and taskbar" is selected both).

  Thanks much for any help.

  LPS

  If you click on the Customize button you will see this below,

  

• I tried sending via a list (contains my own address twice), sending folder is updated, no electronic mail not sent, no error message

  You bird 32.1.0.
  I send a newsletter every week to 3 different mailing lists. (my address is on the first list).
  Today I have not received any error message. The folder contained copies of confirmation sent. Nobody has received a copy.
  I created a new list, 2 - time my name - entries sent. No errors. No e-mail message is sent.
  Suggestions?

  You do not need to use and should not use Bcc: in mail merge. Each message is sent to a single consignee. Because this message is only there is no point or value to hide the recipients. If you use just for:. Your attempt to CSV file sounds is better suited, but it can be very picky about the structure of CSV files, using quotes to include spaces and so on.

  I have no real use for the mail merge myself so can't talk about its usefulness or performance. When I tried even small shipments to some of my own email addresses, it seemed a bit fragile and prone to stop and get stuck, leaving you with no idea claire of which messages were sent, which was to be retried.

  Mail merge in office suite open office / free seems to work better.

• iPhone can contain only the content of five Apple ID

  Since the update my iOS 9.1 and iTunes 12.3.1.23, I get this error "Some of the iTunes Store in the iTunes files library have been copied to the iPhone"iPhone"because that the iPhone can only contain the content of five Apple ID". We have only 2 accounts (only one ID of each) in the music of sharing domestic, and I bought my 5 new iPhone when it came out. Is this a bug? Why it does not list the files that have not been transferred as when it cannot find a file or it is inappropriate for the iOS format so I can study questions?

  I had the same problem, try to synchronize a new 6 iPhone more. Some applications will be synchronized, others not.

  After carefully removing and adding apps one by one, the "Remote" app Apple throws this error. It will not install. Incredibly frustrating.

  I only install the apps I bought (my wife bought 3 that we use more). FYI to check this, go to my applications, make right click on an application, choose information, click on the file tab, and you can see who has been sold.

  iPhone 6 s more, iOS 9.2, OS x 10.9.5, iTunes 12.3.2.35

• "Data dashboard" version 2.0 list drop-down list seen only "one, two, etc.» Instead of the text Enum

  I am currently using the new data on an iPad dashboard 1. I'm coding in suite developer Labview 2012. I found that switches work very well when it is associated with a shared variable. I finally managed to get the drop-down list to control a shared variable of data type typedef/enum. This control very well within the Labview program, but on the dashboard of data drop-down list shows only the "One" "two" etc... instead of the text 'This' Enum 'As' 'Other' I can write back to the dashboard with a text conversion of the enum to the dashboard and place it in a display of string over the fall down. While this gives the operator a display of the current Typedef/enum, it is not very intuitive. They must select 'One' to view 'This' "two to display 'Than' etc...

  How can I get the dashboard of data drop-down list control to display the text of the enum instead of "one" "two" etc?

  I think the point was that your question belongs to this other forum, not the forum of LabVIEW.

  (I'll ask the moderator to move this thread i).