Window residential group doesn't gives me the ability to display the homegroup password. I have
Window residential group doesn't gives me the ability to display the homegroup password. I cannot join the homegroup on my PC to change the password. What can I do here?
Thank you.
You must display the password on a computer that is already joined.
Tags: Windows
Similar Questions
-
I just bought a new laptop with Windows 7 on it, so I decided to try the new homegroup in Windows 7 feature. I activated the homegroup on my desk and apart from the music, photos and videos. I then joined the residential group with the new portable computer using the password provided by the office shared libraries and the same 3 homegroup. All appeard to put up correctly, but I can't browse libraries shared each machine to other machine. I have the Homegroup and click on the other machine and I see 3 libraries, but when I click on any one of them does nothing. This happens on both machines. The only way I can get the residential groups to work is to first go to the other machine and provide credentials on the other machine. After doing this, the homegroup files begin to work. I was under the impression that the homegroup password was all I had to have access to all shared folders with the homegroup, but the only way I can get the homegroup to work is first authenticate itself to other machine using a user name and password.
The two machines are configured with the following:
- Network discovery is enabled
- File sharing and printer is enabled
- Public folder sharing is on
- Streaming Media is on
- File sharing connections is configured to use 128-bit encryption
- Password protected sharing is on
- Homegroup connections is set up to allow Windows to manage.
I came across this forum because I had the same problem today. Real quickly, I have two laptops, one running windows 7 Home premium 32-bit and the other runs windows 7 Professional 32-bit. I have comcast for my internet provider and their cable modem attached to my belkin wireless router. I don't know if my fix will work for someone else, but it worked for me, so this is.
1. unplug the router cable modem wireless2. connect the router to one of your computers using an ethernet cord3. open a web browser and type in the IP address of the router in the Web page bar (as when you type hotmail.com to go check your email). Mine is a belkin so 192.168.2.1 has worked for me.4. the control of the router page should open, and one of the options should be to reset factory settings, do this.5. DO NOT CONNECT THE ROUTER TO THE CABLE MODEM6 configure the router in the same way that you did when you first installed the router, but just to be sure, I used another name for the network7. Once you have the password set up and named network you can disconnect the ethernet cable.8. connect to the new network without wire of each computer (just like when you connect to a wireless network) choose House (rather than work or public) for the network location.9. at this stage my homegroup didn't work, if it is not there for you, you may need to set up the homegroup in Control Panel.10. once the residential group is working the way you want to connect the router wireless to the modem cable and check to see if your internet connection is working by opening a web browser and go to any old siteHope this helps!Cameron -
I tried to install cs3 on windows 10 shadow run on my mac book pro. Technical support told me that it does not run on windows 10 but doesn't give me an opinion on whether she would go if I was running windows 7 to the people's Summit. Any thoughts?
First of all, that the software is old enough so that it does not at all with Windows 10... but
An idea that MAY work to install or run some programs in Windows old 10
First, that the software is old enough for that it may ALSO not work with Windows 7... but
For Windows 7 you right click on the program and select a compatibility option in the pop-up window
-
GarageBand doesn't give me the ability to burn a cd. But it is on the list of options.
Y at - it an update to provide this option?
Is your Mac has a CD player? The option is grayed out, until you have inserted a blank CD in your optical drive. But it is clickable.
-
I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?
Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).
Download a new copy of Firefox and save the file to the desktop.
- Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current version of Firefox, if possible.
- Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
- http://KB.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
I want to download Photoshop CC but I can't manage to do. It keep saying CC is already open I need to shut it down, but I can't find it is open. Can not uninstall it give me the same message. Have a Mac. Is it a lot because I have PScs4? Y at - there someone who can help me?
Programs interfere with the Installation of fence
Mac - Activity Monitor: http://osxdaily.com/2010/08/15/mac-task-manager/
-
Cannot display the homegroup password
Original title: "the homegroup password.
I'm trying to connect our computers in the same residential group, but on the main computer, I can't see the password when I go to the right page to view and print password it says windows can not let me change the password or remove this computer in homegroup. How can I get the password I can't understand it.
Hello
Maybe this can help, http://windows.microsoft.com/en-US/windows7/HomeGroup-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows7/change-a-HomeGroup-password
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
"View or print the homegroup password '+' does not.
"View or print the homegroup password '+' does not.
Hi Orlando,
Thanks for posting your question in the Microsoft Community.
The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:
1. what operating system is installed on your computer?
2. what exactly is the problem you are having?
3. What is the error message that is accurate or complete?
Please provide more information on the specific issue to fix it as soon as possible.
What version of the operating system Windows am I running? :
For reference:
Where can I find my homegroup password? :
http://Windows.Microsoft.com/en-us/Windows7/where-can-I-find-my-HomeGroup-password
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
-
Can not print and change the homegroup password
Original title: Windows 7 HomeGroup
I tried to view and print the homegroup password, but the button would not work.
Also I tried to change the homegroup password, but the button does not work either.
I'm trying to connect a wireless device
"Acer Netbook" to my computer.Help, please!
Hi Moneyman25,
1 you get an error message when trying to connect a wireless device?
We recommend that you disable the security temporarily software and check if the problem persists. If you change the password, then change the security settings.
See turn off the antivirus softwareNote: Be sure to activate security software.
For your reference:
1 see where can I find my homegroup password?
2 see change a homegroup passwordVisit our Microsoft answers feedback Forum and let us know what you think.
-
"View or print the homegroup password" nothing happens.
I am trying to connect two computers windows 7 (a 64 bit the other 32 bit) using homegroup. When I try to make the connection to be asked a password, I know ever created. When I press "View or print the homegroup password" nothing happens. I followed the many threads on this topic and have not found a solution that I can understand. Please explain what to do for a novice in computer science. Is is possible to connect computers through the network without using the homegroup? I have a third computer that the operating system is Windows XP. Thank you.
Here's what worked for me.
Go to the folder C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking
Remove or rename the idstore file. Click to display the password. This folder is hidden, so you may need to show hidden folders
-
Search for Windows 7, why not if give me the files that are not yet in my augument search?
Windows 7 Home premium 64-bit OS.
Have a lot of files are duplicated.
In Windows 7 lets say the files in the folder have files that look like:
Bill 120.le rar
Bill 121, rar
Bill 1 .rarand we want to remove duplicates with '(1) '.
and we enter research * (*)Under XP it would only list the file: Bill 1 .rar IF you entered *(*.) or *) * or (1), etc.
Bill 1 .rar
In Windows 7, since I started to use Win 7 years, everything I do is get frustrited when it will sometimes give me what I ask for the Bill 1 .rar.
but most of the time like now, will give me ALL the files WITH and WITHOUT the "()".Bill 120.le rar
Bill 121, rar
Bill 1 .rarWHY? and how can he give me what I asked?
(I tried ALL the settings and they all do the same thing)
Enter in the search box:
name: ~ = "{}"
The ~ = indicates to Windows 7 search to look anywhere in the name. Usually, the quotes would not be needed, but( ) has a functional use of search for Windows 7, and the quotes tell Windows 7 search just deal with ( ) as a chararacter. I tried to find a way to search for a (?), after? as a wildcard but couldn't. [Update: solution concludes, at the end of the post] However, you can enter this to search for files named with the two ( and ), but not necessarily appearing in the (#) form.
nom : ~ = "(" nom : ~ = "")" »
or more compactly,
nom : (~ = "(" ~ = "")" »)
Update: more than a month later, I realized the more compactly. Subsequently, the? is interpreted as a wildcard character. If more digits is possible, then additional search with? exactly two for? for exactly three and so on.
Name: ~ "* (?) *"
If filename: is used instead, then the tilde is redundant:
filename: "* (?)" *"
-
can I buy new window vista Home premium and install, but same problem not activated and again once I buy Windows vista ultimate and install but I am facing the same peoblem I have no why it happens to my camputer
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response. -
Record is in sight, but select doesn't give all the data
Hello guys!
I have a very strange problem here, which I have already discussed for hours now. I can't find a logical explanation for the behavior.
I have a view composed of several paintings, including one via a database link. No problems at all so far!
A user just informed of a case where a specific record data are not displayed. Therefore, I checked the problem and discovered that the individual selection queries don't produce any result for that specific record. A query that returned a result! ;-(
Now I checked the view and it seems perfectly fine. When you select everything from this point of view where the id is that of the problem record, all columns are returned.
The record exists, the perspective seems to work and also updated (changed some values in a table that contains the view and the view updates immediately)-I have no idea how to solve this problem! Maybe you have an idea? First of all, I think that it is not necessary to view code view, I guess! It's long enough!
I'd appreciate your answers and advice!
Thousand thanks in advance!
SebastianSuppose you have the following data...
SQL> With test_data as 2 ( 3 SELECT 11 int_qb_nr, 12 str_gebiet, 31 str_lrt_sub, 'GEH' test_col FROM Dual 4 UNION ALL 5 SELECT 11,12,31, 'DEF' FROM Dual 6 UNION ALL 7 SELECT 11,12,31, 'ABC' FROM Dual 8 ) 9 -- "end of test data " 10 SELECT * FROM test_data 11 / INT_QB_NR STR_GEBIET STR_LRT_SUB TES ---------- ---------- ----------- --- 11 12 31 GEH 11 12 31 DEF 11 12 31 ABC -- " I need this data to be output " 3 rows selected.Your query (Simplified)
SQL> With test_data as 2 ( 3 SELECT 11 int_qb_nr, 12 str_gebiet, 31 str_lrt_sub, 'GEH' test_col FROM Dual 4 UNION ALL 5 SELECT 11,12,31, 'DEF' FROM Dual 6 UNION ALL 7 SELECT 11,12,31, 'ABC' FROM Dual 8 ) 9 -- "end of test data " 10 SELECT * FROM 11 (SELECT int_qb_nr, str_gebiet, str_lrt_sub, test_col, 12 ROW_NUMBER () 13 OVER (PARTITION BY int_qb_nr, str_gebiet, str_lrt_sub ORDER BY" int_qb_nr, " 14 " str_gebiet, str_lrt_sub " ) rn 15 FROM test_data) 16 where rn = 1 17 / INT_QB_NR STR_GEBIET STR_LRT_SUB TES RN ---------- ---------- ----------- --- ---------- 11 12 31 GEH 1 1 row selected. -- " Included Double quotes to highlight "Oracle may not assign the same number of line for several data set that occurs for the group you mentioned in the PARTITION BY Clause. (int_qb_nr, str_gebiet, str_lrt_sub). Find a way to extend your ORDER BY Clause in the ROW_NUMBER function.
Something like the following:
SQL> With test_data as 2 ( 3 SELECT 11 int_qb_nr, 12 str_gebiet, 31 str_lrt_sub, 'GEH' test_col FROM Dual 4 UNION ALL 5 SELECT 11,12,31, 'DEF' FROM Dual 6 UNION ALL 7 SELECT 11,12,31, 'ABC' FROM Dual 8 ) 9 -- "end of test data " 10 SELECT * FROM 11 (SELECT int_qb_nr, str_gebiet, str_lrt_sub, test_col, 12 ROW_NUMBER () 13 OVER (PARTITION BY int_qb_nr, str_gebiet, str_lrt_sub ORDER BY " int_qb_nr, " 14 " str_gebiet, str_lrt_sub, test_col " ) rn 15 FROM test_data) 16 where rn = 1 17 / INT_QB_NR STR_GEBIET STR_LRT_SUB TES RN ---------- ---------- ----------- --- ---------- 11 12 31 ABC 1 1 row selected. -- " Included Double quotes to highlight "I hope this helps.
Kind regards
JO -
Win 7 ultimate on the PC and win 7 Home premium on the laptop. I don't get the opportunity to join the homegroup of the laptop. I only get the creation of a new option in homegroup. How can I get these two terms of language?
bigdogone wrote:
Yes, laptop or PC are on "home network". PC is connected to the modem, laptop is wireless. By clicking homegroup settings and share on the laptop, I don't have the option of "collaborating" a network... only "create a network". Even if I leave the network on the laptop, I again that the option create a new network.
In your graphical interface of the router make sure NAT is turned on.
What brand of router and model do you have?
If the wireless router is connected to the modem, be sure and use its network instead of ports CAT5 modem ports.
What is the operating system installed for the laptop?
-
My problem is that I can't turn on IPv6 in Windows 7.
My goal was to set up a homegroup three computers so that I can share a printer that is connected to one of them. They are all running different versions of Windows 7. A desktop computer has created a homegroup, and a second desktop computer connected successfully to the homegroup and can print using the first computer printer.
The third computer is a portable computer. When you go to the homegroup settings page, it says that the homegroup is available. But this computer is unable to join when you click on the "join" button. The convenience store said IPv6 must be enabled.
Option is checked in the IPv6 network card settings. (The install button is also active and uninstall is dimmed. I don't understand why this should be as I have read that you cannot uninstall IPv6, if it makes sense for the uninstallation to be grey, why install would be an option? Confusion between.)
Here is what seems to be the root of the problem. In the registry settings, in the section IPv6 DisabledComponents is set to 255 (disabled). I change it to 0 (all features enabled), but I can't always connect to the homegroup. I restart the computer and the value 0 is changed back to 255.
I can't activate IPv6, it isn't surprising that the computer cannot join the homegroup as I read that this function requires IPv6.
Can any expert from Microsoft give me some advice on how to operate the homegroup?
Thank you very much.
I have now found the answer to my problem. This is a setting in the free ZoneAlarm firewall. I will describe the solution in the case of meeting other people that.
I have the default setting of the version of ZoneAlarm is that it disables IPv6 when it starts. (I don't know if it's the same for all versions).
Although I tried disabling ZoneAlarm (and my separate anti-virus) so he was trying to set up group residential, just turn it off has no impact on registry settings - DisabledComponents is always set at 255 until you change to 0 and, critically, restart the machine. Then, the parameter 0 (enabled) will come into force. Or so it seems to me as a layman.
But if you did not disable the automatic startup of ZoneAlarm (like me) then as soon as you restart the computer, ZoneAlarm starts too and resets the 255, new registry entry to disable IPv6. If you can't join a homegroup.
The solution is to open ZoneAlarm and choose firewall, hand and advanced. Then you will see the option to activate IPv6 networks. When I didn't do the notebook had no problem joined the homegroup.
I don't know why I have the same problem on the second desktop computer. Maybe it's runnning a later version of ZoneAlarm to allow IPv6 - I haven't checked.
In any case, I spent hours looking for this solution, so I hope that the description above helps someone else that has a parameter of the problem until a homegroup because of what seems ZoneAlarm made IPv6 settings in the registry.
Maybe you are looking for
-
No sound for almost a year, no matter what I do, its missing after upgrade 7.3
I have an Apple iPad 2, that the sound has disappeared after the 7.3 upgrade. I have version 9.3. Now. I tried everything to get my sound, nothing works. No its for at least a year expected for headphones. It's very upsetting, considering the cost of
-
HP ENVY 700 - what is info from the motherboard?
TB how can he manage? Can I put a 4 TB HDD inside? P. S. If the 'C' drive is infected it spreads to the other HARD drive.
-
I have to restart Qosmio F30-127 in order to recognize the inserted disks
I have the Qosmio F30 127, which has the CARPET * A DVD RW. Very often, however, it does not recognize the fact that there is a disc in the drive. I have to restart for the DVD to recognize the inserted disc. If a disc is placed in the slot, shortly
-
Can I transfer Office to a flash drive to install on another laptop?
I want to transfer my microsoft program office from one laptop to another can be done on a flash drive
-
How dynamically invoke or avoid the API methods depending on the Version of the API?
Searched but could not find guides on this... I have a JDK 4.6 App, which itself pretties by using the () calls Field.setBackground and BackgroundFactory.Since that they require a minimum of JDK 4.6 it don't works on JDK 4.6 or better devices. It is