window vista suddenly closing

Similar Questions

• My Windows Vista suddenly says product key is not valid.

  Hi, my windows vista family premium has been recently reisnatlled of the disks that came with the computer, and suddenly he says that the product key is not valid. I put the computer to get the product key and he came and he said that it was not valid.

  Any help would be appreciated.
  Thank you
  Scott

  Hello

  Use the phone activation method > do not follow the Auto guests > hang to a real person explain that you have reinstalled using the recovery supplied with your computer disks and Activation does not work.

  It is explained in this link

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• HP g60 with Windows Vista guard closing in use

  computer HP G60 (Vista) keeps closing in use. I am also attaching an external fan. How can I fix

  Hi Chesterhenlin,

  ·         How long have you been faced with this problem?

  ·         You did it all changes before the show?

  Follow the steps below for a possible solution:

  Method 1:

  Step 1: Start in safe mode and check if the problem persists.

   

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

  Starting in the advanced startup options and disable the auto reboot and capture the error message.

  Prevents Windows from automatically restarting if an error of Windows to fail. Choose that this option only if Windows is stuck in a loop where Windows fails, attempts to restart, and fails again repeatedly.

  Also, check the event viewer.

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Hope this information helps.

• Problem with windows vista, suddenly not to recognize a printer HP 5600 series that was printing correctly for 5 years

  Windows Vista Plug ' n Play does not recognize printer HP 5600 series. HP Solutions Center's says no HP devices detected. Using USP connect since the printer 5 years ago. Reinstalling drivers does not help. Installation with disc says printer is not connected (USB) to the computer, who she really is. Have tried all USB ports on the computer to see if plug ' n play would work. Any help in doing so. How can I solve this problem?

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• "Help and Support" on Windows Vista

  "Help and Support" which should be available on my Windows Vista suddenly stopped working.  If I try to access, he said his non-operational and contact my system administrator.

  What would prevent the HELP function to stop?

  My computer in an Inspiron 1525

  Hello

  First of all do to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------

  Then these that the 1st here should help solve the problem and the others are just in case.

  How to fix the Windows Vista Help and support
  http://www.Vistax64.com/tutorials/87497-help-support-Vista.html

  Windows Vista and Support help pages do not display correctly
  http://www.Winhelponline.com/articles/194/1/pages-in-Windows-Vista-Help-and-support-are-not-displayed-correctly.html

  "Help and support error" - Service not started
  http://WindowsXP.MVPs.org/Helpsvc.htm

  Difficulty of support and Windows Vista Help
  http://www.Windows-now.com/Media/p/36567.aspx

  I can not open Help files that require the Windows Help program (WinHlp32.exe)
  http://support.Microsoft.com/default.aspx/KB/917607

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Suddenly I can't save anything in Notepad, Wordpad or Paint, using Windows Vista. Help, please!

  Hello.

  I can't 'Save' or ' save under ', using Notepad, Wordpad or Paint. It is a recent development that occur all the same day.

  A summary of each error message indicates that there is a problem with the particular program that requires Windows to close until a

  solution is found.  It is followed by a pop-up stating that DEP closed every program to protect my computer.  As a last resort, I then tried

  to 'Save' in Ms Works / Word Processor and that too suddenly had to close with a similar message (less the DEP pop up).

  It is obviously a case with very strange place. I scanned my system with Malwarebytes Pro and Norton Anti virus software and nothing was detected.

  I would be very happy to help in the restoration of the normal features to these programs to anyone who is familiar with this type of problem.

  I am running Windows Vista Premium / / SP2

  Thanks in advance.

  WaterBearer49

  Hello

  
   
  Method 1:
  
  To help resolve, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
   
   
   
  Method 2:

  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

   
   
  Method 3:

  
  Restore the system to a date when it was working fine. Follow the below link which helps you perform the restore of the system:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• my windows vista is not closed.

  my windows vista is not closed. It goes through all the motions & then the screen turns black, stay that way for a long time & then starts by itself. a window of dialogue sometimes said that just recovered windows suddenly stopped and that sometimes this problem is caused by a pilot of its defective, trying to disable an audio driver, but who will leave my computer without sound. No one knows how to fix?

  Thank you for your response. Windows made of updates & it seemed to fix the problem.

• Help, Windows vista updated suddenly out of nowhere and now it stops and restarts everytime I turn it on.

  I was online when suddenly windows updated and rebooted on its own. When I signed up in the hour glass repeated "busy", and then it suddenly takes me to this error page. It gives me only like five seconds to read, then it tries to restart. It seems to work only in safe mode. It's a HP dv6 Windows vista I got like a month ago, and the only programs I have installed were firefox, and boldness.

  This thread also contains the fix:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9
  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Cannot receive emails through my Outlook Express 6 account all of a sudden. I have 2 computers set up with it, a Windows XP and the other Windows Vista.

  Cannot receive emails through my Outlook Express 6 account all of a sudden.  I can send messages but not receive. I removed all mail rules and blocked senders and I still cannot receive anything.  I tested it by sending a mail to it through different accounts (gmail, yahoo) so I know that there must be some messages.  I also had people reply to my email that I send to what they do, but I don't get their answers.  I have 2 computers in place, using Windows XP and the other is Windows Vista.  I've never had a problem until now. Any help?

  My server contacted me and told me to check my spam using their webmail account, because it was full.  It seems that when I used the rules of the mail I had clicked on delete from the server, just "do not download".  My spam folder was so full that I couldn't receive. Thanks for all your advice!  Mark as resolved.

• My Windows Vista hangs on how closed.

  I have problems with Windows Vista shutdown.  I'll have to shut down the computer manually, as it seems to freeze in stop mode and will not stop. I have optimized, run cleaner, ran Norton, defragmented several times, remove the shortcuts and unused programs and down FixIt programs but not luck.  Please tell me what I can do to fix this problem?  Maby someone has experienced this before, thanks for any help.

  Hello

  Welcome to the Microsoft Community forums. I understand that your computer crashes so that closing.

  This problem can be caused due to the program or device driver interfering with Windows power settings.

  Follow the steps for troubleshooting steps.

  Method 1:

  I suggest you check in safemode, if its fine then run boot.

  Step 1:

  I suggest you check in safe mode.

  Check the link to see in safe mode.

  Startup options (including safe mode).

  http://Windows.Microsoft.com/en-in/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  I suggest you perform the clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note:

  After the clean boot, start the computer in normal mode.

  Follow the steps to start the computer in normal mode.

  a. click Start, type msconfig.exe in the Start Search box and press ENTER. If you are prompted for an administrator password or for confirmation, you must type the password or click continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click restart.

  Method 2:

  I suggest you check out the link.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 3:

  I suggest you check out the link.

  Turn off your computer properly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turning-off-your-computer-properly

  If still the problem persists after you perform the steps in troubleshooting from the link above and if you have problems with Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Why Windows Vista Home Premium will suddenly change in Home Basic?

  Why Windows Vista Home Premium will suddenly change to basic home edition and never change back? Someone asked me to verify the information on the performance and tools > adjust Visual Effects > let windows choose what's best for my computer. But there is still no change with my windows. What can I do now to change it back my Home Premium? Thank you

  No, it not there no Windows Aero in the list. First on the list is Windows Vista Basic. You have another option?

  Thank you.

  Here is the link to the Microsoft Help and Support. The link deals precisely with Windows Aero.
  http://support.Microsoft.com/GP/aero_effects_not_working?EntryPoint=WHHT

  Read the article on the right side. He explains several reasons why waste or not Windows Aero.

  t-4-2

• Media Player on Windows Vista - error C00D10DA - I can't get the CD to release or closing the program.

  I can't get the Windows Media Player program.  C00D10DA error, but I can't do the CD press or closing the program.  It is stuck and I can't do anything.  I tried to burn a CD when I tried to cancel the mode of combustion before he finished.

  Original title: Media Player on Windows Vista

  Hello

   
  Welcome to the Microsoft Community Forums.
  
   
  We're here to help and guide you in the right direction.
  
   
  Follow the steps and check if that helps.
  
   
  We get this error code whenever there is dust on the surface of the disc, the recording speed is high, interference with the programs that are running in the background. We have a solution available for this error in the link below:
   
  You got the C00D10DA error message when you use Windows Media Player.
  Windows Media Player C00D10DA error
  http://Windows.Microsoft.com/en-GB/Windows7/C00D10DA
   
  As a reference:

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
   
  Hope that helps.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Cannot charge PHOTOARTMASTER on Windows Vista. Initially, he had run on Windows XP. Unable to contact the owner of this product company because they have closed.

  I PHOTOARTMASTER and never used. And as I have windows Vista I can't run. It comes up with a failed to load DLL also he does not accept the key to the authorising officer. Can someone help me. I wish that I had used it when I had Windows XP on my old computer. The owner of this product company was closed. Any advice would be helpful.

  Hi, Lobo1951,

  If you saved the file, right-click on it and select run as administrator to install.

  Or, right-click on the exe and select the Compatibility tab

  Check run this program in Compatibility Mode for

  Select Windows XP SP2 in menu drop-down

  Click on apply, Ok

  Since you are not able to renew a license or update, why not try some of the available free photo imaging software?

  PhotoPlus

  http://www.serif.com/free-photo-editing-software/?MC=FSSPHOTOPLUS

  Picasa (I think Google comes with it)

  http://Picasa.Google.com/

  GIMP

  http://www.GIMP.org/

  Several others are listed here:

  http://100-downloads.com/more.php?c=2

• Carbonite keeps closing in Windows Vista

  I get the message of Windows backup Carbonite has closed. I disabled Norton backup already.

  Hi BThrower,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  I suggest you to uninstall the Norton backup utility if you do not use.

  See the link below for more information on uninstalling programs:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this does not help, you can contact the support of Carbonite.

  http://www.Carbonite.com/en/about/contact-us

  Hope this information helps.