Windows 10 install stuck on "implementing updates to.

Similar Questions

• Inspiron 1720 Windows vista install stuck on the end of the installation...

  Hi Pros, I install Vista costs coz hard drive stop working now when I try to install stuck on the end of the installation...

  After a few hours of this, it is only fair that I smile at the idea of nothing.any of screen. I try to install any other good DVD even problem it could be Ram or what Thkxs
  

  haroonsj,

  Thank you for using the Dell Community Forum.

  You will need to install the Sata driver. On one of the installation screens is an option to install the drivers on the lower right side of the screen. Choose this option and put the disc Driver of Dell in. The driver, it seeks to install is the Intel Matrix Storage driver. If you need to download this driver and put it on a disc, you can click on the title below.

  Another way to complete the installation without the first installation of the driver is to change the bios setting to ATA. To do this, restart the system and press F2 to enter setup. Once there you can TAB down to the devices on board and press ENTER. Then tab down to SATA Operation. You see at the top of the screen on the right side the ATA and AHCI. Change that to the ATA. Save the changes and exit. Once the system reboots, you should be able to complete the installation. After installation and that you have loaded the drivers, you will need to go into bios and change the setting back to AHCI.

  Intel Matrix Storage Manager - portable computers

• Windows 7 install "stuck" on the HP Pavilion 17 laptop

  HP, I am trying to install Windows 7 OS that I am unhappy with Windows 8 (sorry).  I did for I think almost the last step, but the Windows 7 splash screen is "stuck".  To date, I have disabled Norton, I disabled the Secure Boot, I changed the boot order to CD/DVD-ROM internal drive then I restarted the laptop with the new HP operating system disk Windows 7 Pro DVD in the drive.  Everything seemed to go ok until he "started" (restart) with the familiar screen of Windows 7 and is "stuck" there.  I was just before he should have asked me for the key.  I tried to go back to Windows 8, and it does not start, so I'm currently leave "Reset" itself, and then I intend to try again.  Why am I 'stuck' to the Windows 7 boot screen?  Thx for your help!

  Ok.

  Please make sure you create your W8 recovery media set before installing W7, because after the installation of W7, the recovery partition very probably will no longer work.

  Check out this guide on how to do this.

  http://support.HP.com/us-en/document/c03481733

  Fortunately, your model is pretty easy to get off at W7 driver-wise.

  Here's what you need to do the drivers for your model:

  You can use all the 4540 drivers s of HP Probook except audio player drivers and card.

  Use the Intel HD graphics to your model driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio: Accept the agreement, download and install the driver for the second on the list (64-bit).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  This model card reader driver should work on yours.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405424&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• How can I prevent Windows 7 install the same 2 updates every time I log out

  Whenever I have shut down the computer a pop filter tells me that microsoft windows 7 is 2 installation updates and to not close or unplug the computer.  This procedure takes about 3 minutes before I get the ok to stop, why what is happening and what I can do to stop it.

  @harry60: to avoid confusion (mine, mainly), please start a new thread about your specific problem.  Indicate your full version of Windows (for example, Win7;) Win7 64 bit) in your first post and the numbers of KB updates that fail to install. Thank you!

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I turned off my computer vista accientally when she was updating windows, now computer stuck at 'Configuring updates step 3 of 3. "

  and now whenever I start it up it goes from an expression of the form "Configuring updates step 3 of 3" then it fails and restarts and goes to the screen even. Help!

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Windows 7 install stuck to the language selection screen

  So I recently set up my own PC and tried to install Windows 7 Home edition. Everything would start to screen selection of language very well, but if I select anything with the mouse or keyboard that was going to happen. I checked all USB ports and they all work when I go to the BIOs menu, but they are still hooked on what an OS install screen. Currently, I have a 2 TB hybrid drive and a 120 GB SSD inside as well as an optical drive to read my installation disc. Any suggestions?

  Thank you man. In fact, the issue has proved being in a simpler way that I thought. I just had to enable the PS/2 controller.  I appreciate your help.

• Impossible to update of Windows and other software (stuck at 'Check updates')

  My laptop cannot update windows, it get stuck at "Checking updates...". The same thing happens if I try to update other software, including antivirus software. That they be stuck all trying to update or to tell me that they cannot connect to the server.

  
  

  Thank you!

  Hi mariusov,

  Run the tool for troubleshooting under construction and check if it helps, here is the link, you can see: the problems with installing updates:http://windows.microsoft.com/en-us/windows7/Troubleshoot-problems-with-installing-updates

  Try the steps listed in the link below: you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates: http://support.microsoft.com/kb/836941

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not updated Windows Vista gets stuck

  I've seen several threads on these, but they do not seem to help.

  I have Vaio laptop with Vista operating system threads. It used to work well until last year.  However, lately when I try to start the computer, it did update Windows and gets stuck on update 3. I tried all the options in advanced mode by clicking on F8 key-start in safe mode, starting with the command line, start in recovery mode, etc. and they all end with the same question.  I don't have a backup boot drive.  I need to recover important data on the computer and need to start the machine atleast once.  Still, I don't want to disassemble the drive hard, etc..

  Can you please help.

  Thank you

  Hello
  Welcome to the Microsoft community.
  Please follow the suggestions in this article and check if that helps.

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  Note: Follow the steps in method 3 first, and then try the FIXIT.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Windows Vista is stuck on the 3rd step of the step 3 update

  Original title: UPDATE STUCK IN LOOP CANT LAPTOP USE. HELP PLEASE.

  Windows vista is stuck on the 3rd stage of the update from step 3 and continuously restarts my laptop acer of nephews, we cannot not beyond this point to use the laptop. Any suggestions?

  Hi Jol1,

  You can try the troubleshooting provided in the link below steps to fix the problem.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Let us know if that helps.

• Windows Update stuck at 'Check updates'

  Original title: Windows Update stuck

  I had to recover my laptop windows 7 back to out-of-box state system. Once presented to my office, I immediately went to Windows Update to install all of the updates that I needed. After installing SP1, and restart the computer, windows update to update the update agent, so he could get some more updates. He said he would close and re - open Windows Update, which she did, but now it is stuck on "check updates".

  The update that broke the update of Windows was "Windows Update Agent 7.6.7600.320"

  I have since made a recovery of the system to the State out-of-box three times and each time "Windows Update Agent 7.6.7600.320" installs Windows Update is stuck saying "check updates".

  I did tons of attempts to solve this problem, but it won't find more updates and I can't install more updates.

  I have also experienced problems with Windows Update still looking for updates when Windows Update 7.6.7600.320 has been installed automatically after the system update to SP1 (it was after doing a clean install of Windows 7).

  The following worked for me:

  1. manually installing KB3083710

  2. manually installing KB3102810

  3. restart the computer

  4. run the Windows Update Diagnostic tool to reset Windows Update (support.microsoft.com/en-us/kb/971058)

  5 restart the computer again and search for updates

• Update to Windows 7 stuck on 'Check updates'

  I've updated 31 updates yesterday because it had not been done in awhile and now it is stuck on updates. I tried some responses on this site but had no luck.

  Install the latest version of the Windows Update, in KB3172605 client included.

  https://support.Microsoft.com/en-us/KB/3172605

  Set automatic updates to 'never check updates' and restart Windows before installing.

  Best regards, VZ

• E531 update the Bios with WIndows 10 installed?

  Is it possible to update the BIOS with 10 Windows installed on E531?

  I don't see W7, W8, and XP

  Yet once, have solved this problem, I thought I would share with others who may have the same or similar issues.

  I was able to update the BIOS on my Windows 10 install with upgrade download BIOS in Windows 8. Simply install as you normally would, and be patient for the machine to install. Installation BIOS itself is a little funky; I saw the screen go completely white for a while without message about progress or anything like that. But ultimately it ends and works well.

• iPhone 4S.  Stuck on request to post a link to iTunes.  Has started after installing the recent software update.  Tried to turn but the iTunes link keeps coming.

  iPhone 4S.

  Stuck on request to post a link to iTunes.

  Has started after installing the recent software update.

  Tried to turn but the iTunes link keeps coming.

  You can not connect the phone to iTunes as requested?

• Where should I install the Boot Camp updates: Windows or Mac?

  With the help of Boot Camp, I have installed Windows 10 when my OS from Apple was Yosemite. Recently, I upgraded the operating system Apple to El Capitan. Today, while working on the side of Windows 10 things, I got a notice of pop-up that I should install the update for Boot Camp. So I have two questions actually:

  • (1) was not the latest version of Boot Camp included in the update of El Capitan? and,
  • (2) should I download it then install the Boot Camp update, when I run Windows 10 or when I'm on the side of Mac?

  1 n ° with the exception of the Boot Camp Assistant, all components of Boot Camp are Windows software and does not part of Mac OS X.

  2. do Windows.

  (137099)

• anyone having trouble installing today 4 new updates from windows update 3 good to go but 1 comes up with the error details: Code 80080005

  Oh if you try a second time to install the update failure and it's going through its under windows 32 bit windows 7 and 64 bit 7

  on 32 bit its kb2249857

  and 64-kb2388210

  All,

  I had the same problem.  According to the article, this update has some compatibility fixes.  At the bottom of the article are links to automatic Installer packages that you can download.  I downloaded one for 64-bit Windows 7 and my office installedif version.

  When I re-run Windows Update and asked him to check the updates, it did not show the update.  Looking at the list of updates installed, showed that the update has been installed.

  The link is http://support.microsoft.com/kb/2388210

  I hope it works for you as well.]

  Thad