Windows 7 install "stuck" on the HP Pavilion 17 laptop

Similar Questions

• Inspiron 1720 Windows vista install stuck on the end of the installation...

  Hi Pros, I install Vista costs coz hard drive stop working now when I try to install stuck on the end of the installation...

  After a few hours of this, it is only fair that I smile at the idea of nothing.any of screen. I try to install any other good DVD even problem it could be Ram or what Thkxs
  

  haroonsj,

  Thank you for using the Dell Community Forum.

  You will need to install the Sata driver. On one of the installation screens is an option to install the drivers on the lower right side of the screen. Choose this option and put the disc Driver of Dell in. The driver, it seeks to install is the Intel Matrix Storage driver. If you need to download this driver and put it on a disc, you can click on the title below.

  Another way to complete the installation without the first installation of the driver is to change the bios setting to ATA. To do this, restart the system and press F2 to enter setup. Once there you can TAB down to the devices on board and press ENTER. Then tab down to SATA Operation. You see at the top of the screen on the right side the ATA and AHCI. Change that to the ATA. Save the changes and exit. Once the system reboots, you should be able to complete the installation. After installation and that you have loaded the drivers, you will need to go into bios and change the setting back to AHCI.

  Intel Matrix Storage Manager - portable computers

• Windows 7 install stuck to the language selection screen

  So I recently set up my own PC and tried to install Windows 7 Home edition. Everything would start to screen selection of language very well, but if I select anything with the mouse or keyboard that was going to happen. I checked all USB ports and they all work when I go to the BIOs menu, but they are still hooked on what an OS install screen. Currently, I have a 2 TB hybrid drive and a 120 GB SSD inside as well as an optical drive to read my installation disc. Any suggestions?

  Thank you man. In fact, the issue has proved being in a simpler way that I thought. I just had to enable the PS/2 controller.  I appreciate your help.

• Windows Vista is stuck on the 3rd step of the step 3 update

  Original title: UPDATE STUCK IN LOOP CANT LAPTOP USE. HELP PLEASE.

  Windows vista is stuck on the 3rd stage of the update from step 3 and continuously restarts my laptop acer of nephews, we cannot not beyond this point to use the laptop. Any suggestions?

  Hi Jol1,

  You can try the troubleshooting provided in the link below steps to fix the problem.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Let us know if that helps.

• Windows Update is stuck on the screen check updates for more than an hour.

  Original title: Windows Update problems

  I just got a new update for Windows 7 and got all my drivers installed. However, Windows Update is stuck on the screen check updates for more than an hour. Everything works except that, and I don't know how to fix it. It has updated two things: the Windows Update Agent 7.6.7600.320 and update for Windows (KB958488). He continues to seek constantly and never find anything.

  Please leave for 5 or 6 hours and if he doesn't find anything:

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• I installed Windows XP Professional Service on my HP pavilion dv2000 laptop (dv you 23009)

  I installed Windows XP Professional Service on my HP pavilion dv2000 laptop (dv you 23009)
  Bellwo are devices showing in other devices in the Device Manager please let me know any problems with the installation or drivers.
  base system device
  Instance IDPCI\VEN_1180 & DEV_0592 & SUBSYS_30B2103C & REV_0A\4 & 6B16D5B & 0 & 4BF0PCI\VEN_1180 & DEV_0843 & SUBSYS_30B2103C & REV_01\4 & 6B16D5B & 0 & 4AF0PCI\VEN_1180 & DEV_0852 & SUBSYS_30B2103C & REV_05\4 & 6B16D5B & 0 & 4CF0

  Ethernet controller
  PCI\VEN_8086 & DEV_1092 & SUBSYS_30B2103C & REV_02\4 & 6B16D5B & 0 & 40F0
  Network controller
  PCI\VEN_8086 & DEV_4222 & SUBSYS_135B103C & REV_02\4 & 2F707902 & 0 & 00E3

  Hello:

  The first device is your Ricoh card reader:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-57868-1&cc=us&DLC=en&lang=en&LC=en&OS=228&product=3651452

  The second is your Intel PRO/100 VE network controller.

  Download the first file (32-bit) on the list:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&keyword=%22PRO%2f100+ve+network+controller%22&lang=eng

  The last of them is your controller from Intel 3945ABG wireless

  The first file is drivers only: use this one if you allow Windows to manage your wireless connections.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19851&lang=eng&OSVersion=Windows%20XP * & DownloadType = software % 20Applications

  Paul

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• additional monitor on the HP pavilion dm1 laptop?

  You can run an extra monitor on the HP pavilion dm1 laptop? If so, how?

  Hello

  It's very simple, you can buy a new monitor with HDMI (digital) or VGA (analog) port. As mentioned above, the HDMI is the way to go. Make sure that you have an HDMI cable.

  Just connect the cable to the monitor & machine, start the machine and

  • Right-click on an empty area of the desktop
  • Select Customize,
  • Select display
  • Select change display settings

  You should see 2 screens (1 # & #2). You can select one of the options in the menu drop-down.

  Kind regards

• Windows Vista is stuck in the loop of update, install update 3 of 3, 0% complete.

  I don't have a Vista CD and I can not function in safe mode because it continues to bring back me to the loop. Please notify.

  Hello

  1. you made any hardware or software changes to the computer?

  2. which update is installed?

  3. have you started the installation of updates?

  You can try the troubleshooting provided in the link steps to solve the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: If the steps above do not work, you will need to contact your hardware manufacturer.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

• Windows 7 takes too long to install, stuck to the 'Setup program starts.

  Hello

  I have a computer that is currently running Windows 7, I got three years. When the operating system he reached last started, I decided to reinstall it from the installation disc that came with it. But for some reason, I'm stuck at the "start Setup", even though I looked in other forums and as I said it, disable the floppy drive on the bios. I managed to turn it off, but still, stuck on 'the installation program starts' I tried to format the hard drive again. I am a student and I really need to get my computer operational.

  Data sheet:

  Windows 7 Home Premium

  RedFox N68S3 + motherboard

  AMD Athlon II X 2

  P. S.

  -My current operating system, Windows 7, is totally corrupted and cannot start. Always displays 'Launch Startup Repair' tried and cannot solve the problem

  If you have bad clusters, the only choice is to replace the hard drive.

• Question from windows vista - get stuck on the Welcome screen.

  I recently had my computer startup problems - it gets stuck on the home page, even if I restart it continues.  If I'm doing a ctrl + alt + delete, and then it displays the desktop.  I have no updates that must be accomplished.  you have an idea why this is stuck?  Thank you!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• If there is a problem with the temperature of my system if I update to Windows 7 Professional 32 bit in HP Pavilion dv6330ea laptop?

  Hello

  Model No. - HP Pavilion dv6330ea laptop. Check out the link http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&d

  I bought my laptop in UK and I intend to improve my system Vista Home Premium 32-bit to Windows 7 Professional 32-bit.

  In some forum users have mentioned that.

  Users with nVidia graphics card should check the temperature of this device before upgrade.

  In this way you will know is it works fine under Windows 7 also.

  How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?

  To do this use HWMonitor (free and recommended) or Aida64.

  Q1] what is the minimum temperature / best should have the CPU and GPU, motherboard, HARD drive?

  Q2] is that this temperature is sufficient to upgrade to Windows 7? It will create no problems after the upgrade to Windows 7? This is the value of the temperature of my system of CPUID Hardware Monitor v1.22

  Motherboard - Quanta 30BC

  Temperatures - THR1

  Value - 46C (114 F)

  Min - 46C (114 F)

  Max - 62 (143 F)

  Inter Core Duo T2350

  Temperatures - Core 0

  Value - 41 c (105 F)

  Min - 41 c (105 F)

  Max - 64 c (147 F)

  Temperatures - Core 1

  Value - 41 c (105 F)

  Min - 41 c (105 F)

  Max - 64 c (147 F)

  Hard drive - ST9250315AS

  Temperatures - Assembly

  Value - 48 c (118 F)

  Min - 48 c (118 F)

  Max - 49 C (120 ° F)

  Temperatures - Air flow

  Value - 48 c (118 F)

  Min - 48 c (118 F)

  Max - 49 C (120 ° F)

  Please answer that will help me to decide whether to proceed with the upgrade to Windows 7 Professional or not of the HP Pavilion dv6330ea notebook PC

  I found a solution to my own post...

  Finally installed Windows 7 and noticed that the temperature is low compared to vista.
  So would like to inform all users with queries concerning questions of temperature on PC portable Hp Pavilion dv6330ea proceed with the installation of windows 7 and temperature is very low, the startup is fast, ahead of the functions that is good in windows 7 over vista.

• Windows 10 install stuck on "implementing updates to.

  I used Bootcamp to install Win 7 on my MacBook Air (13 "mid-2012).

  Now, I want to take advantage of the free upgrade to Windows 10.  I downloaded the app update, GetWindows10-Web_Default_Attr, and it seems to finish the installation.  But at the end of the installation, always in the window titled "Installation of Windows 10," it displays

  Get updates

  < spinning balls > check updates

  Yes, I use WiFi to connect to the internet.  Yes, the last time I tried updating Win7 it also never give up the search.

  What can I do to overcome this?

  Thank you.

  -nello

  I see that I had not "activated" my copy of Win7.  I have now enabled via the internet and tries again, this time using GetWindows10-sds___ instead of GetWindows10-Web_Default_Attr

• Windows 7 Boot stuck in the loading screen

  Hello

  I have an Acer laptop, I don't know really how and when it started there is 3 of us using this computer, but now when I open my laptop it get stuck in the loading screen "starting Windows." It is not frozen, it's just stuck there. And in order to enter the actual Windows operating system, I have to first press a key.

  It could be things possible cause?

  Here are some solutions I've tried based on my research on the Internet:

  1 uninstall Antivirus.

  2 reset the BIOS.

  3 chkdsk all discs in safe mode

  4 scannow command, he had errors but did not say what that

  5 edition msconfig and do a clean boot with no start-up of the thread and MS services only.

  I hope someone can help.

  Thank you

  Hello

  What button do you press; F1 or F2?

  If so, check if the Date and time is correct.

  If she is not and again become incorrect after reset correctly, then turn off machine, then turn again, it's a battery CMOS failed in the motherboard, the origin of the problem.

  See you soon.

• I have changed my laptop HARD drive, I can re - install and reactivate windows 7 by COA on the bottom of my laptop

  I want to change my primary portable hard drive HARD to the SDS drive, my question is can I download the corresponding edition of Windows 7 from MSDN and re - install in my new hard driver then reactivate the license key to use the COA on the bottom of my laptop? (I no longer use the OS to pre-install on my old HDD).

  If I can do these things, another question, can I choose different language version? For example, my OS pre-installation is the English version of Windows 7 Pro, can I use this Chinese version of Simple Windows 7 Pro license key from COA asset?
  Thank you very much!

  Hello

  We can refer to these discussions, and check if that helps.

  Windows 7 disable a computer and install again on another: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-7-deactivation-from-one-computer-and-new/43e9d13c-66a8-46b4-9ca6-53288246e322

  Are the download links of Digital River for Windows 7 legal for the general public to use? : http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/3f21f41a-514c-464f-89c3-fae48482b054

  I can even install windows second computer ultimate product key after you turn off the first computer: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/can-i-install-same-product-key-windows-ultimate-in/e07e5b84-51d9-4fd0-bd62-6fe09cbfd0df

  Thank you.