Windows 10 - screen boot problem

Similar Questions

• Windows 7 screen resolution problem

  To make the question as concise as possible, here's what I have.

  -VM with Windows 7 Enterprise, version 6.1

  -Vmware tools installed from ESX 4 upd 1 host

  -Latest installed Windows updates

  -Windows Device Manager shows no problems with any material

  -Display the Vmware SVGA 3D (Microsoft Corporation - WDDM) driver

  -

  ---

  List of valid modes revealed in favor up to 1280 X 1024 (32 bit), 85 Hz

  Problem is managed by using a console session maximum screen resolution is 1280 X 768, 85 Hz.  Definition of a higher resolution reveals a black screen that is not visible.  Is it possible to get a better screen resolution, or am I stuck?  I'm trying to get a PCoIP view works correctly and I think that this may be a contributing factor.  In other words, I am able to connect, but screen turns and stays black.

  By default the display protocol: PCoIP

  Allow users to override the default protocol: False

  Quality of Adobe Flash: do not control

  Adobe Flash limitation: disabled

  Thanks for any help you can provide.

  In my env, I got following problem:

  Check in your virtual machine video memory = 4 mb, if it is please check your Total RAM of VC/ESX management video video card, if it's something like 36.18 (it's what I had), change it to 32/64 (valid integer). Fixed my problem for XP and Win 7 VM.

  See you soon,.

  Andr3y

• for windows xp Dual boot problem

  I have double system installed in my PC, i.e windows xp and Windows 7. After a while my windows xp was corrupted and I installed the new copy of the installation of XP.after windows, the computer asks me for what operating system to start... It starts only windows XP.can someone say now if I use windows 7 now?

  Hello Sumit Diallo,

  After reading the process you went through, it seems that the only problem is that the reinstalled Windows XP has no knowledge of installed Windows 7.

  In other words, whe Windows XP has been installed, it replaced the BCD.

  Take a look at the following:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Let us know.

  Best regards

• I'll be able to upgrade to Windows 7 Vista boot problems?

  original title: Windows Vista failed to start. I'll be able to upgrade to Windows 7, even if the computer does not start?

  Vista will not start after a Windows Update I tried to prevent. Tired of Vista. Ordered Windows 7 and want to upgrade. Can I switch by inserting the installation disk or I have to do a custom install and lose all the files?

  You cannot use an upgrade disk to do a full install - it will not activate (you would think that this has worked, but it didn't, and then you'll be stuck with having to re - install Vista with a full format and then update).  You need to upgrade a working Vista system started in normal mode.  It cannot be upgraded just by using the disc.

  I suggest you post your problem of Vista in the Windows Update Forum Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum.  You must fix Vista before you can upgrade to Windows7 (unless you have a complete installation Windows7 disk then you can do an installation clean, but will not upgrade and you will lose everything on the hard drive that you save first).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 screen saver problems

  My screen saver does not work correctly. After I got the settings, the saver will start and run for a few moments and close. A while later it will restart and stop again. It could be hours before it starts again. I have reset all settings several times screensaver, and again, I have problems with it working properly.

  Maybe things can stop a screen saver

  Just to name a few.

  Update of security suite / a keyboard or a mouse too sensitive wireless...

• Windows XP pro boot PROBLEM

  I had some viruses and wiped all that out I use installed microsoft security of essentals analysis showed there are 7 and fixed it 6

  but I have and download windows defender to correct the last of them. but when I start windows I get error cannot start windows using document svqwue.dll windows

  go to start, run, type cmd

  in cmd type chkdsk c:/r, and press enter

  type y for Yes and press enter

  Type exit, and press enter

  restart the pc, let checkdisk finish and run again.

  restart the pc and the error persists there?

  Please give an EXACT error message.

  also to ensure this pc is clean with the following:

   

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  Remove all found, restart, and run again until analyses race clean, these can be removed later if you wish. Perform analyses to one at a time, please.

• I can't run in windows xp screen goes to normal boot options and mode safe but keeps coming back to the same screen

  I can't get windows xp to run - I set a restore point - rebooted - ann that he goes to the economy/regular mode promp but when I try to open windows it just brings back me to the same screen.  Tried to run the system restore but disc is not xrecognize it. Help!

  Thank you Gary

  Do not follow exactly...

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If your system uses to work properly, what do you think might have happened to her since the last time, that it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Boot problem - which means 'nothing' begins or displays on the screen

  Boot problem - which means 'nothing' starts or displayed on screen (white, black screen).  Do 'hard boot' to the CPU, then Ctrl Alt Delete & to get to the Task Manager.

  In the process, I see the problem of the wercon.exc process.  Once the process is complete, I can use the computer.
  What is the "fix" for this House of Vista Have.
  Thank you

  Hello

  You can view these methods:

  Method 1 : run Startup Repair and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

  Method 2 : run system restore and check if the problem is solved or not.
  What are the system recovery options in Windows vista?

• Screen resolution problems (Windows 10)

  I downloaded the latest trial 9 Captivate for Windows 10 and screen resolution problems. Basically, making the software unusable. A lot of screens and dialog boxes seems larger than the current window, they are in, making the right and downstairs parts invisible window (usually, this is where the 'OK' and 'Cancel' buttons for example).

  I'm Captivate on a laptop running 64-bit Windows 10 (Sony Vaio with an NVidia GT 640 M map graphic with the latest drivers)

  Does anyone know how to fix this? Here are some examples:

  

  

  

  No retina.

  What is the size of the police on? Win10, it is often larger than 100%, which is not really necessary for your resolution, but that's a retina display. I am using Captivate on Win10, but Surface Pro and laptop have a retina display.

• Satellite Pro L450D - 12 X is not booting from the windows startup screen

  Hello, my laptop Satellite Pro L450D-12 X has been set up on and after awhile, window repair system popped up.
  After a long time he closed and restarted, but it does not start at the windows logo screen. It just stops after the splash screen and the screen goes black.

  Please can someone help?

  Hello

  Looks like the system is corrupted
  Try HARD drive recovery

  Turn on the device, press F8 and choose fix my computer.
  Now choose the recovery of HARD drive in the list of available options.
  This should set the camera back to the factory settings

  But this procedure works only if the HARD drive is OK.
  If the HARD disk is not OK, it will not work

• Satellite L305D-S5892 - Windows has encountered a problem

  Hello

  I have an I have a Toshiba-L305D-S5892
  With Vista Home Prem 32

  I have a few problems and am currently blocked.

  Each problem below, is a problem that I met after taking a few steps.

  * The 1st problem *.

  A few hours ago my screen was frozen just after I tried to install this codec from microsoft, so the only option I had was to do a hard reset.
  When my computer back on, I received this message:

  Windows has encountered a problem communicating with a device connected to your computer.

  This error may be cause of disconnect a device removable storage such as an usb external drive while the appliance is in use or by defective as a hard disk hardware or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  If you continue to receive this error message, contact the manufacturer of the equipment.

  File: \Windows\system32\winload.exe

  Status: 0xc00000e9

  Info: An unexpected I / 0 error has occurred.

  I didn't have any usb device or removable in media.
  I can only access my utility series at the beginning, which is this menu: hand-Advanced-display-security-Boot - out

  * 2nd problem *.

  I opened my laptop and released the CD / DVD + RW, he started upward and now I get this message:

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07

  PXE - E61: Media test failure, check cable.

  PXE - M0F: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  * 3rd problem *.

  I downloaded the NEOSMART repair Cd.

  Once I'm in the System Recovery Options, it tells me to select an operating system. However it has not traded. If I press drivers to load, then a message tells me to insert the media, and then select drivers. I almost 'ok', and then am taken to explore, when there are a few system files and files (all empty)?

  I'm confused... any help?

  Hello

  For me, it looks like a problem with the system eventually installed the HDD failures.
  Why?

  Due to the issue described in point 2.
  PXE - E61: Media test failure, check cable error is displayed because the phone didn t find the installed operating system and try to boot from LAN.
  This happens especially if the HARD drive was not recognized by the BIOS.

  My recommendation;
  Access the BIOS and check if the HARD drive is listed there.
  If this isn't the case, then you will need to replace the HARD drive and reinstall the operating system.

  If the HARD drive is listed in the BIOS, then take a recovery disk and try to reinstall the OS again.
  If you have no recovery disc, then you can order it here.
  (I guess it's a Toshiba laptop model we)
  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  Good luck

• Unable to get drivers 64-bit for Windows 10 through Boot Camp

  Hello

  I installed 10 windows in my Macbook Air 11 inches early 2015 (4 GB ram, processor i5 1.6 hz, 128 GB ssd) via boot camp, installation went well but I see questions wih the screen brightness and volume. When I checked the driverd they show that 32 bits. Anyone successful with the 64-bit windows installations without going through any volume, screen brightness problems? If so can you please help me to get the 64-bit drivers?

  Are there unknown devices in Device Manager? Do you think that all riders Apple under entry HID? The driver 64 bit 32 bit vs is little probable that the issue.

• Restart computer, windows xp screen came then the screen turned white

  Restart computer, windows xp screen came then the screen turned white

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error at startup of the computer?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Windows Vista screen saver don't work.

  I have Vista Premium Home edition.  Years my screensaver bivalent has switched to display my photos in random order, after 3 minutes of inactivity.  Now turns to black and a little rectangular screen appears saying the screen saver does not start.  I tried to reset the screen saver, but so far, I can't make it work.  Help, please

  There is no other details I can think.  My screen saver does not work and I don't know how to fix it.  Thank you.

  Hi Tom,

  ·         Were there recent changes in the computer before the show?

  ·         Have you tried to run the system restore?

  ·         You use Microsoft Wireless mouse?

  Follow the steps mentioned below and check if that helps.

  Method 1: solving the problems of power option.

  To solve the problems of power, run the fixit mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  Method 2: Clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3: Update graphics card drivers.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: The steps mentioned in the books above site Web for Windows vista and Windows 7.

  Hope this information helps.

• Why do I always screen boot to Startup Manager

  When I start Vista, I always get the screen boot manager asking me to select the operating system. I don't have Windows Vista installed. It is however an update of XP, but I reinstalled the Vista upgrade as a clean install. How can I get the screen popping up boot manager?

  Hi Craigbrush,

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information helps.