Boot problem - which means 'nothing' begins or displays on the screen

Similar Questions

• Satellite L670D-103 - nothing displayed on the screen

  Hello, please help, my laptop does not start!

  When I push button 'ON', there is nothing displayed on the screen, but the fan is running, the lights are on except the HARD drive light. The motherboard seems to be ok then, but there screen is always black! For your information, my HARD drive is nearly full (319, 8 GB / 320 GB) and I did not create Toshiba recovery disc

  What is a screen or an OS problem, and how can I fix it? The screen display depends on the OS to start and the screen won't work if the OS is recovered?

  Thank you
  Concerning

  Hey,.

  Theoretically, it could be a malfunction of the card Mother poster to find this point connect an external monitor to your laptop and if the internal display is faulty, you should see something on the screen. Otherwise another part is at the origin of the problem.

  This problem has nothing to do with the HARD drive. Even without disc HARD is installed you should see the screen of the Toshiba BIOS at least.

  Why you have not created the Toshiba Recovery disk?
  The recovery disc can restore the factory settings on the HARD drive, but in this case it will not help you. Recovery disk is only software (Windows).

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Powers on my computer, but no image is displayed on the screen.

  Powers on my computer, but no image is displayed on the screen.

  You forgot to tell us something about your computer. You hear any sound from the computer at all once you turn it on, it? It sounds like the hard drive turning upward? You see absolutely nothing on the screen? Be more descriptive and include information about your computer (computer desk/computer laptop/brand-model), his age, and precisely what happens when you turn on the computer. It is a hardware problem and narrowing of component that failed is not possible without more information from you.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  MS - MVP - Elephant Boy computers - don't panic!

• When I click on START / all PROGRAMS /, most programs do not display on the screen.

  I had a problem with a virus. Used Microsoft security programs to remove it. However, when I click on START / all PROGRAMS /, most programs do not display on the screen. Any ideas on how to solve this problem?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Create a new user account and check if it helps:
  http://support.Microsoft.com/kb/279783

  It will be useful.

• Loginoff, save your settings and Windows stops no display on the screen, every time I stop my Windows XP Professional SP3

  Hi all

  Hi Patfaucher1974,
   
  Your question seems incomplete. When you say "Windows is no display on the screen stop" means that you do not get the screen that says "closing Windows"?
  -You are unable to shut down your computer?
  -If so, can remind you to make changes to your computer between the calendar when things worked fine and now?
   

  Try the steps listed in the article below and check if that helps you:

  Your computer stops responding when you try to shut down in Windows XP

  Additional reference on:

  Advanced Troubleshooting for shutdown problems in Windows XP

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• I have sony camera "cyber-shot". But since last 3-4 months when I connect it with my desktop PC, it has not displayed on the screen. Why?

  I have a small handy device the company Sony. The name of the template is - Cybershot. It is 10.1 megapixel with screen 7 cm square. When I connect it to my PC of countertop, it is not displayed on the PC screen. I have already installed the software, I received with the device of the company. For a few months, he was allowed and eventually I had my PC formatted by a technician and then, he stopped the display. I asked the technician if he ruined the camera software, he said no, he has not touched the camera software. I bought the new USB wire to fix the problem. But it is still not resolved. Can someone give me the reason why the camera is not displayed on the screen of the PC?

  Hello Manu,

  1. have you checked if the camera software is present on the PC?
  2. are you able to connect other USB devices to the PC?
  3 have you tried to connect to other USB ports?

  Open the list of programs by clicking the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  You can try the following methods

  Method 1: As the PC was formatted, the software of the camera could have been uninstalled.  If you cannot find the software of the camera, I suggest you to install.
  http://eSupport.Sony.com/us/p/select-System.pl?PRODTYPE=7

   

  Method 2: If this does not help, connect your camera in a different USB port and check the status.

  Install a USB device
  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  
  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-in/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Method 3: follow also, troubleshooting of this article:
  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

   

   

  Follow the steps and let us know if this helps.  If the problem persists, answer and we will be happy to help you.

• Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen

  Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen. It started after the uninstall of Registry Mechanic and PC Tools, but this cannot be bound. IE 9 seems to be particularly affected. So do not display all of the windows that show on the taskbar.

  Use the Windows logo key & left arrow several times for each windows application through their positions until they appear on the screen.

  This problem is normally reported after someone used an external monitor as the applications try to open in the same position they had when they were last open - so if there was an external monitor last time now disconnected, they will try to open it in the middle of nowhere.

  I know not, or the other tools that you mention, but if they are registry cleaners then they could also affect other parts of your system.

• KDF-55wf655 video mode still displayed on the screen

  I have a problem with our kdf-50wf655 where the video mode is always displayed on the screen.  Watching cable TV, it displays a list box "video 7' in the upper left corner. We had this TV for 10 years and this question popped up just for a reason any.

  I tried to watch some of the tv settings and turn them off and who does not.  I also went through other video modes and it does the same thing.  Does anyone else have this problem and fix?

  Hi mcpcp99,

  Welcome to the community of Sony!

  Try resetting the TV to its default settings. You can follow the steps below:

  1 turn on the TV. While holding down the reset on the remote control.

  2. press the POWER button on the TV. (The TV puts off, then power on.)

  3. release the RESET button.

  NOTE: The TV reset Resets all your custom default factory settings.

  Thank you!

  Jerome

  If my post answered your question, please mark it as "accept as a Solution.

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.

• Somehow the display on the screen rotates 90 degrees

  original title: Dell vostro 1400.

  Somehow the display on the screen rotates 90 degrees cw on the Dell Vostro 1400 laptop.  How to rotate the screen 90 degrees ccw?

  Hello

  Try Ctrl + Alt and upward or down arrow... see how you go with it

  Concerning

  GT4U

• This message is displayed on the screen at startup "smrgdf program is missing.

  This message is displayed on the screen at startup - what is it and how do I do it please?

  Hello

  Check the suggestion of Volunteer J of his last message

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-pictures/images-on-MSN-home-page-do-not-load-Yahoo-home/95970f3f-6b8f-4cf5-ad28-8b8e4c7ba646

  smrgdf.exe seems to be a file of System Mechanic.

• Turn off the display on the screen for the next meetings

  I have several MX300s TC7.3.6 running.

  They are all registered to CUCM and TMS as the alternative directory server.

  Can you tell me how to disable the meetings to come, displayed on the screen?

  The MX800s have a field in CUCM for OSD - Todays booking power, but not the MX300s

  THX,

  Rob

  The command is there for the MX800 won't say he supports it, the TodaysBooking configuration is supported only on older codecs that perform TC software.  It isn't a way to disable the OSD indicator for future meetings, your only option is to use a custom wallpaper that will eliminate some parts of the OSD as the clock and the list of upcoming meetings.

• Drivers audio to display on the screen

  Hello. I have already reinstalled vista on my inspiron 1525 / and I want to know what drivers I have installed to make the audio buttons I push (volume up, down and mute) to display on the screen? Like when I'm pushing him to display it on the screen.