Windows 10 upgrade for users of Windows 8?

Similar Questions

• Path of logical upgrade for users of ESX 3.5

  I was stuck under a rock for a while so if my questions are redundant - my apologies.  I support a rather small VMware environment, - I have two production Dells, a 2850 and 2950 running ESX 3.5 Update 5.  I have a few "lab" ESX3i 3.5 environments.  I noticed on logging in today that ESX 3.5 hit end of life or maybe it was the end of support on June 2010.  What is the next way to logical upgrade for people like me.  Who don't need the sphere/clould solution.  I saw an ESXi 4, is there an ESX 4.0 also?  Thanks for an entry and a direction.

  Yes, ESX 4.0 also.

  Do not be afraid 'vsphere', it's just a new name for "Virtual Infrastructure"

  ---

  VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4

  http://blog.vadmin.ru

• Can I install Firefox in a way that will never check an upgrade for all users?

  In the approximately 500 mV VDI environment I would like to disable checking of upgrades for users of all virtual machines. We cannot update Firefox until we have ensured that the new version works with specific tools. Virtual machines are linked clones that are being refreshed to their State before logon after users log off. This causes the popup to come upgrade whenever users connect. Users are not allowed to upgrade, then it is a nuisance that I would like to eliminate them.

  I found that I can use on: config to disable checking of upgrade on the image, where all virtual machines are created, but cela will not shut it for all users for the user with which the image is kept. Is there a central setting that allows me to do this? Or this would require a change in profile all users? And if the latter, what a change I need to make to their profile?

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

  lockPref("app.update.enabled", false);

• My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?

  My laptop has been out of service for Windows 10 preview and free offer, but now work. Is it possible to get the upgrade for Windows 10 free?

  Hello

  You buy Windows 10, as there is no free upgrade to Vista 10.

  https://www.Yahoo.com/tech/s/Microsoft-just-confirmed-Windows-10-pricing-everything-know-114542550.html

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  How to buy Windows 10:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• Can I upgrade Edition Vista Home premium to windows 7 using vista anytime upgrade for free?

  anytime upgrade is included with the purchase of windows vista

  can I upgrade Edition Vista Home premium to windows 7 using vista anytime upgrade for free?

  Lol you cannot use Anytime Upgrade upgrading Vista to Windows 7.   The Vista program to THE was the upgrade of a Vista edition to a higher edition of Vista only.  The Vista program to THE ended when Vista was removed from retail sales.  It has never been free.

  THE present program is to upgrade an edition of Windows 7 to a superior and is only available to current users of Windows 7.

  If you want to upgrade Vista to Windows 7, you must purchase a standard upgrade of Windows 7 at retail price.  Please see

  http://www.microsoftstore.com/store/msstore/list/parentCategoryID.44066700/CategoryID.50726100

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.

• I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  lost product key

  I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  See http://support.microsoft.com/kb/811224

• Get the 8004FF84 error when you try to download and install an upgrade for Windows

  I can't download and install an upgrade for windows. Try to install the product error code 8004FF84.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to how to replace lost, broken, or missing Microsoft software or hardware on the Microsoft Web site.

  Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Wait about 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  Hello

  What is the model of your machine? (cq40 is a series). Anyway, please try this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3805640#N228

  Kind regards.

• What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

  What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

  Thank you

  TS

  Kglad

  I used the default value presented to me (computer username) and installed fine.

  Thanks for your comments.

  Concerning

  TS

• Moving from Windows to Mac - upgrade for items?

  I have 10 items for Windows and am upgrading to an iMac. I can't upgrade price even if I want to install on a new machine (different)?

  Yes, you can purchase an upgrade for a different OS than the version you are upgrading.

• I am a user of xp for life. Microsoft will offer an upgrade for xp users that is affordable?

  I am a user of xp for life. Microsoft will offer an upgrade for xp users that is affordable? I think that xp users should get an upgrade, just like users of vista to windows 7. It wasn't my fault for the nonsense of the European union. but now I have to upgrade or not? Please answer

  Hello

  The following links may be useful:

  Upgrade Windows XP to Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Upgrading to Windows 7
  http://Windows.Microsoft.com/upgrade

  Windows 7
  http://www.microsoftstore.com/store/msstore/list/parentCategoryID.44066700/CategoryID.50726100

• Usually, there is a way to upgrade for current users of the software at a reduced price. I don't see something like that for Lightroom 6. I have to pay full price just to upgrade to the new version of standalone LR6?

  Usually, there is a way to upgrade for current users of the software at a reduced price. I don't see something like that for Lightroom 6. I have to pay full price just to upgrade to the new version of standalone LR6?

  Just go to the products

  Scroll to Lightroom and click on buy and then replace I want to buy lots of upgrade. The price is $79.

• Cannot upgrade/change/install Flash Player versions? For users of ZoneAlarm, here is a solution.

  For the past two weeks now, I was faced with the problem of not being able to properly install my flash version 9 player. I get would be the installation, of course, but they would be damaged facilities. I can't view certain websites in flash, and they stop install me FlashPlayer, even when I have version 9! At least that's what the computer tells me.
  
  After scouring all over the internet for similar problems, I noticed these cases more correlations. Another dilemma plagued me little time after, I realized that I couldn't change my homepage as well!
  
  Then I read the various cases of other people and what was striking, but they seemed all use ZoneAlarm firewall products. Soon, I found that the new firewall/OS product feature is the suspect.
  
  For users of ZoneAlarm Firewall (specifically with detail using OSFirewall versions), OSFirewall might lock your internet settings, startup programs, host file, but more importantly, your ActiveX files! Zone Labs included this feature to make the product much more coldly, but they do not realize that we, the users, need these files as well.
  
  The solution is simple. Simply navigate to the control program in ZoneAlarm (I use Pro). In the main tab, you should see the "Program Control" options. Below, there is a button "Custom". Click on that and go to the tab "OSFirewall" Alto! There are these turds. Left-click on the second column options will give the choice to leave. If you want to make sure that this unnecessary feature don't mean your settings again, I suggest you give all the permissions 'Allow' (notches).
  
  NOTE: even if you disable 'Program Control' or OSFirewall, you need to activate OSFirewall and change the permissions. This is because permission settings will be always locked to those present. In big, even if you disable OSFirewall and have the "Install ActiveX" setting refuse, it is still in denial permission. Check the marks all the way.
  
  If you still have problems, and you still feel that ZoneAlarm is the cause of the problems, I suggest you go tab 'Programs' from the control program. Here, you can view all the applications you have run your PC. Search for 'Macromedia' or 'Flash' of linked files and gives them all access to the internet and all the permissions. If you are not sure, remove all the non-Microsoft programs listed to reset these settings. When you install Flash Player again and you see requests for permission, just "let them".
  
  PS OSFirewall is not available on the free version of ZoneAlarm. Also, to make sure that ZoneAlarm is the cause of the problems, run a complete spyware and a virus scan. Most of the malware time causes these problems as well. Happy computing!

  For the past two weeks now, I was faced with the problem of not being able to properly install my flash version 9 player. I get would be the installation, of course, but they would be damaged facilities. I can't view certain websites in flash, and they stop install me FlashPlayer, even when I have version 9! At least that's what the computer tells me.

  After scouring all over the internet for similar problems, I noticed these cases more correlations. Another dilemma plagued me little time after, I realized that I couldn't change my homepage as well!

  Then I read the various cases of other people and what was striking, but they seemed all use ZoneAlarm firewall products. Soon, I found that the new firewall/OS product feature is the suspect.

  For users of ZoneAlarm Firewall (specifically with detail using OSFirewall versions), OSFirewall might lock your internet settings, startup programs, host file, but more importantly, your ActiveX files! Zone Labs included this feature to make the product much more coldly, but they do not realize that we, the users, need these files as well.

  The solution is simple. Simply navigate to the control program in ZoneAlarm (I use Pro). In the main tab, you should see the "Program Control" options. Below, there is a button "Custom". Click on that and go to the tab "OSFirewall" Alto! There are these turds. Left-click on the second column options will give the choice to leave. If you want to make sure that this unnecessary feature don't mean your settings again, I suggest you give all the permissions 'Allow' (notches).

  NOTE: even if you disable 'Program Control' or OSFirewall, you need to activate OSFirewall and change the permissions. This is because permission settings will be always locked to those present. In big, even if you disable OSFirewall and have the "Install ActiveX" setting refuse, it is still in denial permission. Check the marks all the way.

  If you still have problems, and you still feel that ZoneAlarm is the cause of the problems, I suggest you go tab 'Programs' from the control program. Here, you can view all the applications you have run your PC. Search for 'Macromedia' or 'Flash' of linked files and gives them all access to the internet and all the permissions. If you are not sure, remove all the non-Microsoft programs listed to reset these settings. When you install Flash Player again and you see requests for permission, just "let them".

  PS OSFirewall is not available on the free version of ZoneAlarm. Also, to make sure that ZoneAlarm is the cause of the problems, run a complete spyware and a virus scan. Most of the malware time causes these problems as well. Happy computing!