I am a user of xp for life. Microsoft will offer an upgrade for xp users that is affordable?

Similar Questions

• OIM11gR2ps2 how to use OID - 11.1.1.6 Connector for updating a user that has been created through LDAPsync?

  Hello

  I have two connectors configuration, a database connector generic to an Oracle database that the provisions of a user account (it works fine). The second connector, I am still getting set up properly is a LDAP connector specifically OID - 11.1.1.6.0.

  Use case:

  A user creates an account through automatic recording and is created simultaneously in OUD ldap with the johnDoe1 username. johnDoe1 connects in IOM and asks an instance of application called DBAccount. They fill out the application in all there information (user ID, fname, lname, phone, address, title, etc.). Once they support demand goes through the necessary approvals and after that it's approved successfully the info is put in service to the database. Once this operation has been successful, I would like to provision an update a users ldap entry that was created in the custom attribute ldapsync is called OUDappusername, this attribute is an attribute with value mutli because if demand for the other apps, they will be updated in the OUD aswell. This OUDappusername will be generated by an event handler or to pre-populate the plugin and the format will be "app |" user name' where app is the app they ask and User_name is the user name they use to connect to the IOM, for example "DBAccount". johnDoe1. If they keep asking other apps they will be updated in the OUDappusername so that they may have DBAccount | johnDoe1 and ask another application called app2, then they will also have app2 | johnDoe1 and so on.

  Is this possible with the connector and how do I set it up to users update rather than set up a new account in the OUD?

  The question:

  I currently have the configuration of connector so whenever I have set up a user creates a new user rather than allow me to simply update a user. It is possible to configure the connector for updating existing users is born through ldapsync, rather than those created through the app instance configuration. I have found no documentation on that.

  Thanks in advance,

  J

  Edit #1 - I changed the wording and added more details.

  Edit #2 - I reworded my question to be more specific and focus on a single issue and changed the title to be more specific.

  Post edited by: 6d986dc3-6c9b-401d-9892-76032e7a1e05 on April, 07/04/2014

  Hello

  I just wanted to post what we found the answer. We did not use the connector, but what we did was we created a custom, adapter, which is a small and associated java class then new task in the process definition for the database resource in the console design and we made calls to jndi for the ldap Protocol to update this attribute multivalue. It was very quick and easy and could be tested before the implementation of the IOM. Thanks again for all the help and talk me through the procedures.

  Thank you

  J

• When Microsoft will release product keys for the new xbox live beta dashboard for users? 26 August

  Hello

  I am registered for the new program to update xbox live dashboard beta and I was wondering when microsoft will likely make the product keys available for this update will take place. I waited more than 24 hours now and I find it unacceptable to keep the people waiting for such a highly anticipated update.

  did anyone know when these product keys are likely to become available because I'm starting to lose my patience now.

  syhawkes

  I would check the updates on the site of Major Nelson

  http://Majornelson.com/2012/08/21/open-call-more-testers-welcome-for-2012-Xbox-Live-update-public-beta/

  When I made the beta for the dashboard they usually come out in waves. You just need patience because there is no time to get it.

• Can I buy an iPod 128 GB with discount for students? That is to say through Unidays

  I ask this question as an adult student who is currently studying the passion bis... is to tell the story through the ORGANIZATIONAL unit. I have my card of NUDES and a link to the website UniDays and I bought an iPod Touch from 128 GB red via UniDays and I don't seem received a discount. I intend to use it for my studies, that is, pod casts, pictures, glued transcripts and these other uses.

  I am probably much older than most here, and as this hope you treat me with kindness... hahaha. I was wondering just or concerned that the student 15% discount have not been applied to my purchase... W520571556 that I thought that I've been led to believe, and as such, I bought this article.

  Any help would be appreciated.

  Thank you

  Episteme :-)

  You're not address in Apple here we are a few users like you.

  If I was in the USA I would call 1-800-MY-APPLE

  Nether this

  http://www.Apple.com/Shop/Browse/campaigns/education_pricing

  Neither this

  http://images.Apple.com/education/pricelists/PDFs/us_education_institution_price _list_11_11_2015.pdf

  List of discounts for an iPod touch

  The former does not list even an iPod touch and the price stated in the last case is the same as that appearing in the regular online store

  http://www.Apple.com/shop/buy-iPod/iPod-touch

• How can I delete a registry entry for a program that I uninstalled a month ago?

  What utility Windows should I go to in order to clarify things?   It removes all of these intrusive.

  Do not.

  If you ever think that your registry database must be cleaned, repaired, amplified, to the point, cured, twisted, fixed or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• ISE: advise users that EAP - TLS can only be used

  A large School Board accepts only EAP - TLS connections.  This requirement is easily disseminated to teachers, but not students whose personal devices continue to try to connect using the PEAP Protocol.   Once users connect with EAP - TLS, they are authenticated on AD.

  1 can we through the switch block PEAP but leave the EAP - TLS to cross? I could not find a command for it.

  2. If we cannot stop the PEAP requests to ISE, could treat us like CWA PEAP connections, but have a special authorization rule that would say If inner PEAP tunnel is then the CWA-nonEAP-TLS do web authentication that would be a custom web page which would have a message instructing students how to use EAP - TLS? This would make sense?

  3. do you have better suggestion how to block before PEAP that it reaches EHT or a way using ISE to indicate to users that they should use EAP - TLS, PEAP not if they want to connect?

  Thank you.

  Cath.

  Usually at the start of the eap negotiation, there is an agreement between the applicant and the radius server on which eap types are negotiated. If you have that suggested the client to eap - tls and the supplicant is misconfigured and uses the PEAP Protocol, he must drop off.

  You can consider a strict exclusion policies so that if a customer fails to authenticate after 3 attempts you can exclude them for a few minutes.

  You can create a homepage (url redirection) that when type mschapv2 authentication and the authentication status set to 'failed' a self-help html page is presented to the end user to use eap - tls, keep in mind that port and ip will authorized in forwarding ACL.

  What do you see in the failed attempts?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

  After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - M892G - 84D7W-VYVVB
  Windows product key hash: 8URszDmqchXk0nyLWXx2jditWJE =
  Windows product ID: 00359-030-0078141-85521
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {656CCD50-41C9-41C3-968E-D29BBD46AA74} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.120330 - 1504
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: 2.0.48.0
  OGAExec.exe signed by: Microsoft
  OGAAddin.dll signed by: Microsoft

  OGA data-->
  Office status: 100 authentic
  Microsoft Office XP Professional - 100 authentic
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {A9BF75C2-FBF3-4795-953B-E259BD0C2131}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-VYVVB00359-030-0078141-855215S-1-5-21-1580701254-2691487138-3117158855HP-Pavilion,FK484AAR-ABA m9400tAmerican Megatrends Inc.. 5.33 20081107000000.000000 + 0009CE93307018400FA04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC100100Microsoft Office XP Professional10roTAwuyn2K8JnfnZ5p70qCWUSww =54186-640-4025656-1742314 97728824C57890A

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00170-030-007814-01-1033-7600.0000-3102009
  Installation ID: 010516027730660442597094592351394511091775644602024082
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: VYVVB
  License status: licensed
  Remaining Windows rearm count: 5
  Trust time: 10-02-2012 17:32:36

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 10:1:2012 07:16
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LAAAAAEAAAABAAEAAQABAAAAAgABAAEA6GFOQjaxCJyw9OJsCMr4P8RozDE =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-CPC
  FACP SLIC-CPC HPQOEM
  HPET SLIC-CPC HPQOEM
  MCFG SLIC-CPC HPQOEM
  LASRYVITRAGE HPQOEM SLIC-CPC
  GSCI HPQOEM SLIC-CPC
  SLIC SLIC-CPC HPQOEM
  SSDT HPQOEM SLIC-CPC

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------
  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  What's your date and time correct?

• I have seen the user that one of my menu apps start how do I see on the other?

  I installed Microsoft office on my pc but I got 2 users. I have seen the user that one of my menu apps start how do I see on the other?

  Former title: need help please

  Soumya, salvation

  Thanks for posting the query on Microsoft Community.

  If I understand correctly, you want to access the applications in the two accounts on your system.

  When you say "I could see menu start of the user as a single of my apps", are you talking about office applications or other applications?

  For the office, if you are installing Office into the administrator account, it will be copied to all user accounts on its own.

  For other applications, you can consult the links below and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-security/sharing-apps-on-the-same-Windows-81-computer/11102ceb-4C99-4BB1-81fb-6c9e91b4066d

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_store/can-different-local-users-on-a-Windows-8-PC-share/a3d40be6-3504-4e61-8b13-d8f8e5c7bc3b

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• How to warn the user that the application is about to disconnect automatically?

  If a user leaves his workstation unattended for a certain period of time, the Apex application disconnects automatically from the server.  The user is not warned about this and if they attempt to save some data on the current page, they don't realize that their data was not recorded until they click on the "Save" button.  At this point, the values of page element empty out and they realize that their data has not been saved.  It is the current page allows many lines to affix and the user can waste a lot of time entering data which will fall into the compartment bits.

  Is it possible to make my Apex application notify the user that the application has been automatically disconnected?

  Better yet, the user can be notified that the app is about to disconnect and the opportunity to extend their session?

  Thank you!

  Kim

  What APEX version do you use?

  The following link, Although unsupported by Oracle, contains a plug-in (I used) for the expiration times of session allowing notifications customized (about to cut etc..).

  http://www.apex-plugin.com/Oracle-Apex-plugins/dynamic-action-plugin/skillbuilders-session-timeout_188.html

  Keep in mind, it's good for APEX 4.0...

• Get only the users that correspond to all the links

  Apparently a very simple problem, but I can't seem to understand.

  Below is a table that contains the user's and LinkId name.

  CREATE TABLE UserLink (UserId NUMBER, LinkId NUMBER );
  ALTER TABLE UserLink ADD PRIMARY KEY (UserId, LinkId);
  INSERT INTO UserLink VALUES (1, 1);
  INSERT INTO UserLink VALUES (1, 2);
  INSERT INTO UserLink VALUES (3, 1);
  INSERT INTO UserLink VALUES (4, 1);
  
  
  
  

  I am looking for a query in which I can plug a LinkId list that shows only users who have a relationship with of all THE LinkId condition.

  In this example, you can assume that the list is equal to (1, 2), but you can not make all the assumptions concerning the size of the list, except the size! = 0.

  The query to search for users that match to THE provided LinkId is quite simple:

  SELECT UserId FROM UserLink
  WHERE LinkId IN (1,2)
  
  
  
  

  The correct query should output:

  USERID
  ------
  1
  
  
  
  

  And it should work for any > 0 see size of values.

  Here's one way:

  with ID_LIST as (select 1 LINKID from DUAL union all select 2 from DUAL)
  select distinct USERID from USERLINK a
   where not exists (
                    select LINKID from ID_LIST
                    minus
                    select B.LINKID
                      from USERLINK B
                     where B.USERID=a.USERID
                   )
  ;
  

  11 g here's a different way using UNPIVOT to generate the list of link IDS.  It is perhaps less bulky than a long list of UNION all.

  with ID_LIST as (select  1 a,2 b from DUAL)
  select distinct USERID from USERLINK a
   where not exists (
                    select LINKID from ID_LIST UNPIVOT (LINKID for COL in(a,b))
                    minus
                    select B.LINKID
                      from USERLINK B
                     where B.USERID=a.USERID
                   )
  ;
  

• Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Hello

  Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Concerning

  It depends, but generally, no..

  Guidelines for the minimum system requirements are especially on what we and won't fix the bugs for.  Flash Player probably works on Windows Server 2000 and we will not intentionally break it or prevent you from installing, but we will also not fix it if it breaks.  In cases where it will crash on launch or some other out-of-box horrible experience, like trying to install on a Mac PowerPC, then we will prevent pure and simple installation.

• How can I add a page of favorites for a site that I create in Adobe Muse?

  I need to create a page of favorites for a site that I create in Adobe Muse. I want my Web site users to be able to select the favorite images on my site and save them via links to the Favorites page so that they can see all their favorite both articles. It is not an e-commerce site, just a portfolio site that needs this feature. Any ideas on how I might be able to do this in Adobe Muse?

  Hello

  Are you referring to the creation of a button for your site page or 'Add to Favorites' for items such as image page, where the user is when going to his profile can view the favorite points, he added.

  You must use html for the favorite button: http://stackoverflow.com/questions/10033215/add-to-favorites-button

  Add to Favorites, if you are using Business Catalyst to host your website so you can make the end of BC.

  http://helpx.Adobe.com/business-catalyst/partner/add-customer-Favorites-list.html

  Thank you

  Sanjit

• How to get the data of the users that belong to a particular Exchange mailstore

  Hello
  
  I need to get the details of all users that are provided in a certain message Exchange in IOM store. I can get it by querying the database?
  
  Kind regards
  Radhika

  , But there must be a table in the database that could store data in form for the parent process. You can get this name from the table of definition of Exchange Provisioning process in console design itself.

  But this option stores the details for which the resource Exchange is requested to the user only.

• How to inform users that pay is underway

  I would like to know how to warn users that pay is being processed.
  
  for example, we have different users doing data entry for the different branches of the company payroll and payroll Admin wishes to inform all users that it is processesing of payroll for the pay period. So, how can we do such a thing? As in the case, the user connects by using his username and password a warning message should appear that payroll is processed.
  
  all comments/suggestions are welcome!

  This can be solved with the following approach.

  1. create two responsibilities - payroll Admin & payroll data service with similar menu.

  2. fix the responsibility Admin pays the payroll Admin user who is permitted to run payroll.

  3. fix the responsibility of maintaining data on payroll for users in various branches that are allowed to be updated / payroll data entry.

  4. until payroll Admin began to run the race of payroll, it will define the value profile of ' HR:Query only Mode "Yes for the responsibility of maintaining data on payroll. So now users in different industries can only view data but can not create / update the data.

  5. once the payroll run is completed, payroll Admin will now be no. profile, so that users of branches can now enter data.

  6. you should make it a policy that users in the various branches must use responsible for maintaining data on payroll to enter / update payroll data even if they are responsible "Pay Admin" attached.

  Hope this has solved your problem.

• charged for the purchase, that I don't have them they

  I recently received an invoice by e-mail to Apple for an article that I did not order or purchase. So, I think that my apple account has been compromised.

  I have now changed my password and completed the form 'Cancel and manage subscriptions' but I have not received an email back from Apple about the cancellation of this order.

  Can someone help me find a way to ensure that this purchase not approved is cancelled my account while I am not charged for something that I have not bought?

  Also if there are other forms or a person / group I have to contact in particular with regard to my compromised account I you would be very grateful if someone could let me know.

  Thank you very much in advance for your help

  Camgirl2

  What 'form' have you completed? It is likely to have been a phishing e-mail trying to get the details of your account and payment and not Apple.

  Phishing and similar e-mail: Phishing and other suspicious emails

  The phishing emails: identifying fraudulent "phishing" email - Apple Support

  ITunes real e-mails: identification of legitimate on the iTunes Store - Apple Support emails

  View the purchase history of your account: view the history of your purchases from the iTunes Store - Apple Support

  If it is a real e-mail and it shows on the purchase of your account history, and no one else has access to your account or computers/devices, please contact iTunes Support: https://support.apple.com/contact . And change the password of your http://appleid.apple.com account (which is how you already changed it?) - after changing: what to do when you have changed your Apple ID email address or password - Apple support.

  If it is a phishing e-mail you send to Apple: [email protected] and then delete him.