Windows 2000 don't read do not flash drive

Similar Questions

• Windows Vista don't read do not SanDisk 2 GB sd card

  I have a vista edition windows Home premium, service Pack2. My problem is that I have a 2 GB sandisk micro sd with adapter card. When I tried to use it, a moment ago, it did not work. but I, somehow fixed. I don't remember what I did, but it worked. and now, it's the first time I am using the card in a moment and the computer does not read it. I searched online for some time and could not solve the problem. I hesitate to do a system restore or anything of the sort, because it is my grandparents computer. Finally, I came to the conclusion that the sd port can be broken, but I tried another card and it worked perfectly. The other card was also a sandisk 2GB, but this is a regular, not a microphone. I went into Device Manager and all drivers are working. I also made sure the sd card is not locked.  I don't know what to do anymore. Help, please.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the steps below.

  (a) click on Start

  (b) in the start search box, type devmgmt.msc , and then on enter.

  (c) Please check if you can you view the device in Device Manager.

  (d) If you do, right-click on your device and select set to update driver.  If there is an update, restart the computer and insert the SD card, and then test the question.

  If there is no update, remove the SD card. Restart your computer, then insert the SD card.  In some cases, the computer will automatically search for drivers.

• Windows 7 don't read is not GPT data readers

  Heyo,

  So I have a secondary data drive and an external hard drive, the two NTFS formatted with TPG. My primary fails HD and I replace, reinstall windows, etc. However, now this computer (and only on this computer; other Windows 7 machines very well) reads the secondary data disk to format RAW instead of NTFS and sees only the unused portion of the external data drive. I installed an update of windows designed for big HDs, update bios and drivers from the chipset.

  I really appreciate all the help you can provide.

  See you soon

  Hello

  You might face this problem when there is a conflict with the drive letter of the device you are trying to connect to your computer. But before that I suggest you to take the backup of the data that you have in this computer and then try to change the drive letter. You can follow the steps below for data.

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows/back-up-files#1TC=Windows-7

  Once you have managed to take the backup of the data, you can follow the steps below to change the drive letters and then check if it helps you.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

  If you still experience this issue you can also try to change the type of partition on the drive, but do not forget to bring it back to the top of your data by following the steps in the link provided earlier.

  Convert a hard disk or partition to NTFS format

  http://Windows.Microsoft.com/en-us/Windows/convert-hard-disk-partition-NTFS-format#1TC=Windows-7

  Let us know the status of the issue.

• HP 2000-2B09WM DVD drive don't read do not; a Windows 8

  HP 2000-2B09WM DVD drive don't read do not. I have Windows 8 OS. Have you tried the MS CD/DVD it Fix troubleshooter and I am given the following: media in the CD/DVD drive is not readable (hp DVD A DS8A8SH SATA CdRom Device)... Not fixed.

  So, how can it be resolved? Thank you.

  Hello @jsilvester2006 ,

  Welcome to the HP Forums!

  I understand that your CD/DVD drive on your laptop does not work.

  Can you please answer the following questions:

  You have recently installed software or Windows updates?

  When did you start in this topic?

  Have you tried several DVD?

  Make sure you have the latest version of the installed CyberLink PowerDVD software. Without this software, the DVD drive cannot read DVD or Blu - ray discs. You can download this software here: the CyberLink PowerDVD software.

  You can also try to do a restore system before the issue started if it a question recently of news. You can access the restoration through the HP Recovery Manager by tapping the F11 key, while the portable lights.

  I would like to know if it works for you.

• I'm trying to access my work PC to remote my PC at home. The box says Windows 2000 Server and I do not know where to find my user name or password

  Original title: Windows 2000 server

  Search results for "I try to access my work PC to remote my PC at home. I need to get through my credentials and don't know where to find the information. The box says Windows 2000 Server and I do not know where to find my user name or password. The one I use to log into my work PC or PC at home do not work. »

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Seeing the drive DVD Satellite M50 does not turn OFF, CD/DVD drive don't read do not

  Hello

  I have a Satellite M50 - mx5 with a carpet * a DVD player. When I insert the CD or DVD, the player starts, turns the CD autour (the indicator light flashes)... but a few seconds later, the drive stops turning, but the DVD drive light is on.

  Windows also think that the DVD drive is empty.
  I also tried to boot Windows from the CD when the computer starts upward, but without success either.

  Ideas for what is wrong? Is my DVD drive broken?

  Thank you
  Eli

  Hello

  Sorry to said but in my opinion, drive is dead and that the replacement allows the reader features can save.

  But be aware that not every drive is supported and can be used with the laptop!
  Take a look in the user manual. Sometimes the compatible players are listed.
  And it s useful to know that all parts can be ordered from the ASP in your country.

  have a nice weekend ;)

• DVD RW drive (e :)) don't read do not all disks)

  I have a Dell Studio Windows Vista. The DVD RW drive (e :)) does not.) Regardless of the type of disc that I put in, my DVD player does not recognize. When I go to 'My Computer' to open the disc manually, a message appears telling me to insert a disc, even if it is already inside. In addition, when this message appears, it ejects the disc I have here. I did everything. My computer is up to date. I went to the only Device Manager update my CD/DVD drive and it is already up to date. I don't know what to do from here.

  Hello

  Check with Dell Support, their drivers and documentation online and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =========

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly. Since it accepts no disc do not forget to remove ALL the power and control the
  cable connections - remove and replace (at both ends where possible).

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The reader of CD/DVD reading CD and DVD incerted incerted, no clue don't read do not?

  CD/DVD read/write driver reads CDs but is unable to read the DVDs. suggest, if there is no solution for the problem.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Help PPCS4 don't READ DO NOT MADE

  Hey everybody,

  I had the Premiere Pro since I left Avid when I discovered that Premiere Pro was simply faster and the ability to use plug-ins that were not available to Avid.

  I have a serious problem.  I tried to solve it myself for four days in a row and it was a real hell. I don't have a solution, so I came on my forum preferred because one of you geniuses probably has the answer.

  I just upgraded PP CS4 several days ago, when windows 7 is released.  My problem is that whenever I visited FX then close the project and open it back up PP CS4 does not show the video for rendering.  In addition, my peak files are rerendered everytime I open this same project.  It is serious because there is no way that I can open old projects if PIC files must be recreated each time.  Some of these older projects are almost an hour long

  Nothing of what has happened in CS2.  It may also be because Windows 7 has blocked access to my seven drives external hard so if one knows what the needs of security to be on because I gave all access to my external drives without results?

  Here's what I can tell you all that is not the problem:

  1. I looked in the folder of rendered files and the names of the rendered clips do not change in name.  The name as PP gives them remain the same.

  2. that made PP renders a completely new clip next to the clip made old, which is the same clip that I made the last time that the project was the opening.  I rerendered the same clip so several times trying to figure out what was the problem there are seven melted clips that were all the same.

  3 PP CS4 is read the rendered clips to halfway through the opening because when I deleted the folder of rendered files it asks where the folder is.  However, when I take out the garbage and he back and starts so I still have to made.  Rendering is incredibly important to me, as if it was for most of you, since I use a lot of FX in PP CS4 or I do color correction and then do the FX in a program of FX.

  4. in addition, all this is done in a new project that I created for pp cs4.  I'm afraid to open my old projects since I certainly don't want to see these projects I've been working so hard on not being able to be made.

  5. it does the same thing on other new projects.

  6. my rendered files are usually on a drive esata external hard, however, I moved my files that are made to the c drive to see if that was the problem, and the problem was still there?

  7. I ran pp as an administrator and has not helped.

  As you can see them all I tried everything I could think of to try to fix things on mine until I came here.  :-)  I even spent several hours to read old threads here and couldn't find anything.

  My best guess is that hard drives will not PP read render files and I tried all the settings.  If anyone has a photo setting in Windows 7 or Vista there are other drives which have made it files on?  Or is it something else?

  I don't know if it has to do directly with the problem, but when I start PP CS4 a pop up window comes up with "failed to load the Module. ' dehaupt DH_SoftDist 1,2 +' '.

  Please help as my computer is my life,

  Knight of FX

  Quad Core OC to 3.6

  GeForce 9800gtx OC for FX plug-ins that like to use the video card

  Windows 7

  Eight hard drives (including raptors like drive C)

  4 GB of ram memory

  There are a number of questions here. Given that you are logged on as administrator, UAC (user account control) set to off. Settings panel of configuration/system and Security/Action Center / Exchange User Account Control.

  Then in disk management, make sure that each external drive has a unique drive letter and fixed. Mark each disk with the given drive letter, so that you know the one with the letter K will always letter K.

  Then check each disk by right-clicking on the drive in my computer, select Properties, go to the Security tab and ensure that full access is set. If this is not the case, change the security settings to allow free access.

  After removing CS2 after installing CS4 may be violating some registry settings (at least that was the case with CS3 and CS4), then I suggest to reinstall CS4.

  These steps are likely enough to solve the problem.

• I am running Windows 8 on my PC and my flash drive does not work! I need drivers?

  I just got a USB SanDisk's Cruzer Glide Flash drive that does not work with my PC under Windows 8. Will I need to go to the Web of SanDisk site to download the drivers for my PC will be compatible with the flash player? It is said that it is Compatible with Windows 7, Windows Vista and Windows XP, because it does not appear to be compatible with Windows 8 what should I do?

  (I should mention that my computer is a Dell inspiron Special Edition with ports USB 3.0)

  Cruzer flash NOT detected by Windows PC drive

  Too bad I have solved the problem, thanks anyway.

• is there anyway that I can simply download a VPS Windows version on a disk or a flash drive and reinstall the OS in this way?

  Original title: Windows Vista Edition Family Premium Situation!

  So, my desktop came with Windows Vista Home Premium, which I didn't know until about five minutes when I tried to use a password reset and it came with an error message. Being a little smarter I have myself give credit, I found that the password reset I used (I had gotten my laptop) has been installed only for Windows 7 because it is the operating system on my laptop. I have no idea if the office came with a disk recovery or not, since my mother bought the display instead of in the box as most of the people get it. I can't get to the desktop because my mother has forgotten his password and is the administrative account and this is the only account available. I decided that I need to reinstall Windows Vista Home Premium to the computer but I don't want to buy a version of it, if I can't, anyway I can just download a Windows VPS on a disc or flash drive and reinstall the OS in this way? Or do I absolutely have to buy a new version of Windows?

  Hello

  There is no available legal vista download.

  And you make a reset disk on that machine, not another machine and make you before you forget the password, not afterwards.

  If this is not applicable, you must reinstall the operating system.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  __________________________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows Explorer crashes when you go to Flash Drive.

  Original title: Explorer windows compared to SD card

  lately, whenever I try to use a flash drive or plug in an SD card, windows Explorer stops responding.  I can't view the contents of the card player, and I have to restart windows Explorer.  I use Vista, and my antivirus (Kaspersky) is up-to-date and scanned for viruses.  I am at a loss.  as strange as it may seem, I believe that the issue is in some way associated with the USB ports (because I can insert an SD card into the SD slot and it works very well), my printer works great.

  Hey e_dante1,

  (1) it might be possible that Kaspersky scans the disk for the virus. Disable the same and see how it goes.

  (2) test in safe mode with network behavior. This disables all your third-party services and drivers to load and use Basic Windows drivers required to run it.

  Reference:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  (3) if access to a flash drive or check his mail behaves normally in safe mode with networking, the problem boils down to conflict with other third-party applications installed. In this case, perform the clean boot to discover the guilty app. See: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  (4) get the update below which has fixes for the reliability issues in the USB components. Cumulative update rollup for USB in Windows Vista Basic components

  Notes:

  o ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the above article.

   

  o run the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get windows xp re - install for installing the flash drive to the computer error portable "windows\system32\config\system".

  My Acer Aspire One has error "windows\system32\config\system" How can I get a copy of windows xp original usb? When I bought the

  computer laptop windows xp made & paid for. Product key is on the back. Can I download & reinstall using a flash drive?

  C:\Windows\system32\config\system is one of the files that make up the system registry.  Backups of the system registry files are kept in the 'C:\System Volume Information' folder under the system restore program.  Probably all you need to do is copy of registry backups in the Windows\system32\config folder.  A reinstall of windows may not be necessary.

  To do this is to start your machine from a free "Live Linux" thumb drive.  You can create a startup disk Ubuntu here:
     <>http://www.Ubuntu.com/download/Ubuntu/download >

  Follow the instructions of "Try me" and you should be able to copy backups of registry in place.  Windows has "Hidden doubling" the System Volume Information folder, but Linux doesn't seem to have any problems with it.  After starting from the Thumb Drive Linux, follow the instructions in the following article from part 2, step 6, using the graphical interface of Linux to copy files (right click copy, make a right click Paste) instead of the lines of command in the article.  With a little patience, you can restore the registry from a backup, and be back in operation

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Windows 7 continues default installation does not no driver for HD audio on a working one.

  Hello

  I have a problem with the realtek HD audio driver in Windows 7 Pro x 64. My audio is an integrated sound card Realtek HD (realtek alc660 6-channel codec) on motherboard, Asus k8v - vm SE. Fresh after installation of Windows 7, it installs its default HD audio driver and says, it works (in the Device Manager it says, that the device works properly), but in the list of devices in reading (in the speaker system tray icon menu) there is no peripheral, so finally there is no noise. There is no problem, given that Realtek has its own drivers for Win7 x 64 available, which work just fine (ver. 2.39 R at the moment). The problem is that, after every single boot computer, Windows installs back its own drivers by default, which as I have already said do not work. The curious part is that it does not retrieve them after reboot, but only after the turn of market.

  I think the problem lies in the fact that Realtek drivers are not certified, and the MS drivers are of course. I think that Windows is to choose the latter, because it believes they are safer (workin Realtek & non certified drivers vs MS pseudo-travail & certified drivers).

  Someone has suggestions how to stop the installation of defective Win7 drivers? Installation of those appropriate to each boot is not very practical.

  Kind regards
  Dominik

  Hello

  1. the first solution didn't work, but it made me realize, that the pilot was not recovering but it was deleted and then recovered with the standard procedure (certified drivers > uncertified drivers). In addition, it was everything at random, when the driver has been deleted - sometimes it worked very well after stop and sometimes not.
  2. second solution can be followed only partially. Can I uninstall the device, but I cannot uninstall the Windows driver (maybe because the system is assuming that MS is the most trusted provider). Of course, I am able to uninstall third-party drivers, but I'm not ready to delete the driver from Realtek (I tried this however).

  3 following the first solution that I found, that Windows still prefer certified above drivers is not certified. So I came up with an idea to remove the default window driver and disable the function of downloading drivers from Windows Update. It was quite tricky, because I found, I have (the administrator of the system without restriction) am not able to even list the driver file (c:\Windows\System32\drivers\HdAudio.sys), not to mention the actual deletion of the file. It's funny that I managed to the list by using the search function, but I was not yet able to delete, so I rebooted a LiveCD and deleted from there. I also removed copies of the folder in the places, where Windows Update downloads. After that it seems to work fine now.

  4. I suggest Microsoft to release a fix or sth, that will not Windows 7 install the default driver for this particular unit, since it does not work. Or allow users to decide which drivers they prefer to use - even is not certified, because it may not be an isolated case, when a certified driver is not of works, but a certified, does not it is preferred and used. Or force the producers to certify their drivers somehow.

  Kind regards
  Dominik

• Impossible to format windows xp with CD-ROM, floppy disk, flash drive

  Hello

  my computer toshiba laptop windows xp home edition, version had the virus and cannot install windows xp with the CD or flash drive.

  There is no console recovery, nor the NTDLR file.

  If I try to install with cable and other computer do it?

  Please help me

  
  

  Thank you

  Hard drive test - CD Bootable:
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
  For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
  Fujitsu utilities: http://www.fujitsu.com/us/services/computing/storage/hdd/support/utilities.html
  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.