Windows 2003 comments CustomizeVM_task

Similar Questions

• Customization of comments does not not on Windows 2003 SP2 64-bit

  Hello

  I have a server ESX 3.5 with Center Virtual Server 2.5 aned Labmanager 3.0.1.

  I am running 32-bit as 64-bit VM Templates.

  I created packages of Sysprep for 64-bit machines, and each of them works perfectly except for the Windows 2003 SP2 64-bit model. Where the comments customization fails. I tried everything I can think of.

  Trashed the model and built a new, recreated the Sysprep package, updated the SP. But I still get the same error.

  Here is the log file:

  "2010-01-29 00:34:58 execution of command =" C:\Program Files (x 86) \VMware\VMware "-cmd machine.id.get.

  2010-01-29 00:34:58 the command succeeded, output from the command: numnics = 1 & macaddr_0 = 00:50:56:3 has: 01:22 & bootproto_0 = static & ip_0 = 10.88.50.185 & netmask_0 = 255.255.252.0 & gateway_0 = 10.88.48.1 & dns1_0 = 10.88.48.101 & dns2_0 = 10.88.10.55 & suffix_0 = alpha.kaplaninc.com & primaryNic = 0 & computerName = Config1430VM0 & UseSysPrep = Yes & mask bits = 1 & markerid = 109719069 & reconfigToken = 233550085

  2010-01-29 00:34:58 ProductKey = F73XK-QH23X-4FR8C-M98DP-VKQ4Y

  2010-01-29 00:34:58 number of NETWORK cards = 1

  2010-01-29 00:34:58 m_primarynicindex = 0

  2010-01-29 00:34:58 current computer name = WINDOWS2003SP16, new name of the computer = Config1430VM0

  2010-01-29 00:34:58 computer name set to Config1430VM0

  2010-01-29 00:34:59 suffix = current primary DNS, new primary DNS suffix = alpha.kaplaninc.com

  2010-01-29 00:34:59 main setting suffix DNS for alpha.kaplaninc.com

  2010-01-29 00:34:59 checking if marker file C:\WINDOWS\autoconfig-109719069 exists

  2010-01-29 00:34:59 marker file does not exist

  2010-01-29 00:34:59 running command = "C:\Program Files (x 86) \VMware\VMware"-cmd 'info-get guestinfo.vsla.customizationscript '.

  29/01/2010-00:34:59 failed to execute the command, command output value: not found exitcode:1

  2010-01-29 00:34:59 running command = xcopy "sysprep\Win2k3_64'"C:\sysprep"/ S/E/Y

  2010-01-29 00:34:59 the command succeeded, output from the command: sysprep\Win2k3_64\deploy.chm

  sysprep\Win2k3_64\factory.exe

  sysprep\Win2k3_64\readme.txt

  sysprep\Win2k3_64\ref.chm

  sysprep\Win2k3_64\setupcl.exe

  sysprep\Win2k3_64\setupmgr.exe

  sysprep\Win2k3_64\sysprep.exe

  sysprep\Win2k3_64\sysprep.inf

  sysprep\Win2k3_64\wfinf_guide.doc

  9 file (s) copied

  2010-01-29 00:34:59 command = cmd /c copy "Customize - guest.exe" "C:\sysprep\i386\$OEM$" / y

  2010-01-29 00:34:59 command execution failed, result of the order: the system cannot find the path specified.

  0 file (s) copied.

  ExitCode:1

  2010-01-29 00:34:59 cannot copy utility for customizing the comments to C:\sysprep

  2010-01-29 00:34:59 error customize the guest operating system"

  Here, any help would be greatly appreciated I have a quality assurance team to test the 2003 64 bits and at the present time, they are unable to do so because they do not receive an IP address from the scope of the Labmanager.

  Thank you

  Nadine

  You are missing something:

  C:\sysprep\i386\$OEM$

  This file should be present in the directory SYSPREP on the Lab Manager, if not, then something is missing.  I believe that Lab Manager that creates during Setup, but you can do ths following

  First of all, we need to make a folder path that looks like this

  sysprep\Win2k3_64\i386\$ OEM$

  In the oem folder, make a txt file named:

  Cmdlines.txt

  Open the file and just put this in it:

  \[Commands]

  'TAG_RUN_CUSTOMIZATION_EXE '.

  This should replicate to have the correct file:

  C:\Program VMware Lab Manager\Tools\CustomizeGuest\Windows\Sysprep\Win2k3_64\i386\$OEM$\cmdlines.txt

  (Note that your way this may differ on the Lab Manager server)

  Once this is done, you will need to rebuild the sysprep packages before deploying again.

  Note, you will need to each sysprep folder path too.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• NetApp SnapDrive one 6.0 in question in comments Windows 2003

  Does anyone know if pilot Netapp MPIO DSM for Windows is required to run SnapDrive one 6.0 and SME5.0 in VM server comments Windows 2003 that uses of the RDM.

  My guess is no, because there is really no fiber HBA or multiple paths within the virtual machine, but I can not answers definetive on it. My configuration is: esx3.5 u3 with FC-attached storage. Anyone out there have a similare in production configuration?

  Not necessary. The multipaths are managed by the VMkernel and the "canonical device name is used for the RDM.

• Get the event 680 Viewer when the guest account is disabled in Windows 2003

  Hello

  We have "guest" account disabled on Windows 2003, but again we see events like this

  <13>2 Jul 01:58:33 192.168.80.11 security MSWinEventLog 0 5768968 Sun Jul 01 15:58:32 2012 has 680 xxxxhostnamexxx Audit of the failures of the security user SYSTEM connection logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 login account: comments Source Workstation: xxxhostnamexxx error Code: 0xC000006A 58482770

  What could be the reason?

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Problems adding a hard drive to a Windows 2003 client

  I am trying to add a hard drive to a guest VM on a host running ESXi 4.1.0 standard. It is a historical system that we must keep and maintain for another 1 & 1/2 years. There are 15 comments on this host.  The local database has 1.63 TB of storage with 868,85 Go free. All comments thick supply usage.

  The prompt, I work with is a Windows 2003 R2, 32-bit, Service Pack 2, Standard Edition.  Currently, I have two drives C: = 80 GB, & E: = 20 GB. I am trying to add a third hard drive of 300 GB.  When I try to add the 300 GB drive, I get the following error message. "Disk capacity was not properly formatted or was out of reach.  It has been replaced by the nearest acceptable value. " Value, it is replaced by what is 256 GB.

  I used the same Windows operating system to create three other similar servers with the largest hard drive = 100 GB C:, E: = 100 GB, & F: = 1.5 to.  Microsoft's web site, said that this operating system can handle 2 TB of storage.  The only difference with the other hosts three, that's they run vSphere 5.5.

  The size of the block of your VMFS datastore is the limiting factor, the bottom suggest that your datastore to VMFS-3 has been configured with 1 MB block size where the maximum virtual hard disk and the file size would be 256Go.

  See below for the limits provided by VMFS-2 and VMFS-3 block sizes.

  Block size	Large virtual disk on VMFS-2	Large virtual disk on VMFS-3
  1 MB	456 GB	256 GB *.
  2 MB	912 GB	512 GB *.
  4 MB	1.78 TB	1 TB
  8 MB	2 TB	2 TB minus 512 B *.

• Windows 2003 &amp; 2008 vCPU compatibility

  Hi guys,.
  I use the vSphere Enterprise license
  I received some comments std VMs Windows 2003 and windows 2008 std, I turn vCPUs to 8 for these guest virtual machines
  I wonder is Windows 2003 & 2008 supports 8 vCPUs or no, I've read somewhere Windows 2003 supports maximum of 4 processors of material, but I couldn't find the vCPU compatibility matrix
  your help will be much appreciated
  Thank you
  Kind regards
  Chan

  For this and for licensing reasons, VMware has introduced virtual vCPUs multi-core with vSphere 4.1. You can assign the number of vCPUs you need, and then set the way they are presented to the guest OS.

  With vSphere 4.1, you must configure it as explained http://kb.vmware.com/kb/1010184, vSphere 5 provides this setting in the GUI.

  To find out how many "physical" processors are supported by see for example http://support.microsoft.com/kb/888732/en-us or http://msdn.microsoft.com/en-us/library/ms143760.aspx Windows

  André

• guest operating system Windows 2003

  I can't install the guest operating system windows 2003 on vsphere

  It does not detect HARD drive

  Help, please

  John

  I asked the same question a few weeks back,

  Anyone recomment me to use Parellal from LSI Logic Controller.

  You can create flp drive just map new file flp to already working the floppy drive has virtual

  Download the driver from

  http://www.LSI.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html

  Copy the driver from the floppy disk

  You can use this to insert the driver during installation of operating system of new os.actually comments, I used this method

  and we think more

  I heard that the flp file included with ESX 4.0 U1 has the SAS pilot

  guess this will work

  concerning

  Maniac

• Oracle EBS R12 on Linux 64-bit vs. 64-bit Windows 2003 OS

  Dear all,
  
  Oracle EBS R12 with DB 10 gr 2 64-bit
  
  on Linux 64-bit vs. 64-bit Windows 2003
  
  The data/book white/comments, those who can help to make a decision in what concerns performance on OS Linux 64-bit vs. 64-bit Windows 2003.
  
  Management wants to basically the following:
  •The advantages/disadvantages of 64-bit Linux
  •The advantages/disadvantages of 64-bit windows

  Please clarify for me, my understanding is good? or any other comments.

  You are right.

• HP officejet d155xi - need driver for windows 2003

  Hi all

  I need your help.

  I have a hp printer officejet d155xi and need to install it in the Windows 2003 operating system but, unfortunately, theres no driver available for Win 2003.

  Are you able to provide me with that. Your help is really appreciated.

  Thank you

  lgeood03

  This problem is already solved. Simply download the Windows XP driver and it works to Windows 2003. Thank you all...

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• Satellite A100 - 906 PSAA9E: I can not find drivers for Windows 2003 Server R2

  I found and installed some drivers of http://ru.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=RU

  Look at the screenshots of my computer, please.
  Window "Device Manager":
  http://www.DISA.HO.com.UA/Toshiba/1.gif
  http://www.DISA.HO.com.UA/Toshiba/2.gif
  http://www.DISA.HO.com.UA/Toshiba/3-1.gif
  http://www.DISA.HO.com.UA/Toshiba/3-2.gif
  http://www.DISA.HO.com.UA/Toshiba/4-1.gif
  http://www.DISA.HO.com.UA/Toshiba/4-2.gif
  http://www.DISA.HO.com.UA/Toshiba/5-1.gif
  http://www.DISA.HO.com.UA/Toshiba/5-2.gif
  How can I solve this problem?

  PS: sound does not work

  Hello

  As mentioned above, you will not find the Toshiba drivers designed for Windows 2003 R2 server.
  But don t worry, and don t give up.
  Windows XP drivers must simply be compatible and you should be able to install the Xp drivers on the Win2003 Server operating system.

  Good luck

• Satellite A100 PSAANE - need drivers for Windows 2003

  Hi all

  I try to search the Internet for satellite a100 PSAANE drivers for windows 2003 but I can not find...

  Can someone help me please!

  Hello

  You won't find these drivers anywhere
  Win 2003 uses Win XP as the basis
  This is why you must use the Win XP drivers!

  Visit the European driver of Toshiba page and choose the satellite A100 PSAANE
  http://EU.computers.Toshiba-Europe.com

  Then, you will get all the drivers for Win XP

  Good bye

• HPE Smart Array P440ar: hp smart array p440ar / 2 gb windows 2003 fbwc

  Hello!

  (Hp smart array p440ar / 2 gb fbwc) will work on windows 2003 (32-bit)?

  Hello:

  You can also ask your question on the EBC - Proliant servers HP Support Forum

  https://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.V9fxKeT6u9I

• Satellite L10-102 drivers windows 2003

  My laptop will not connect to my wireless adsl modem even not wpa or wep password is enabled on windows server 2003.

  Hello

  In my opinion, you should try to establish the connection on how best without passwords or the firewall settings. This device is not supported for Windows 2003 server and it is not possible to find a driver designed by Toshiba.

  In my opinion driver designed for Windows XP Home edition should work too but try to identify what WLAN card is registered and check if you can find a real driver of the site s manufacturer.

  If you are able to see your network, but it can not be connected, check the WLAN settings.

  Good bye

• can I view all the bookmarks of all time next to my home page, as the old windows 2003 could, I now have windows 7 &amp; firefox 4. I love being able to see all my favorites all the time.

  can I view all the bookmarks of all time next to my home page, as the old windows 2003 could, I now have windows 7 & firefox 4. I love being able to see all my favorites all the time. Edit

  Just hit CTRL + I