Customization of comments does not not on Windows 2003 SP2 64-bit

Hello

I have a server ESX 3.5 with Center Virtual Server 2.5 aned Labmanager 3.0.1.

I am running 32-bit as 64-bit VM Templates.

I created packages of Sysprep for 64-bit machines, and each of them works perfectly except for the Windows 2003 SP2 64-bit model. Where the comments customization fails. I tried everything I can think of.

Trashed the model and built a new, recreated the Sysprep package, updated the SP. But I still get the same error.

Here is the log file:

"2010-01-29 00:34:58 execution of command =" C:\Program Files (x 86) \VMware\VMware "-cmd machine.id.get.

2010-01-29 00:34:58 the command succeeded, output from the command: numnics = 1 & macaddr_0 = 00:50:56:3 has: 01:22 & bootproto_0 = static & ip_0 = 10.88.50.185 & netmask_0 = 255.255.252.0 & gateway_0 = 10.88.48.1 & dns1_0 = 10.88.48.101 & dns2_0 = 10.88.10.55 & suffix_0 = alpha.kaplaninc.com & primaryNic = 0 & computerName = Config1430VM0 & UseSysPrep = Yes & mask bits = 1 & markerid = 109719069 & reconfigToken = 233550085

2010-01-29 00:34:58 ProductKey = F73XK-QH23X-4FR8C-M98DP-VKQ4Y

2010-01-29 00:34:58 number of NETWORK cards = 1

2010-01-29 00:34:58 m_primarynicindex = 0

2010-01-29 00:34:58 current computer name = WINDOWS2003SP16, new name of the computer = Config1430VM0

2010-01-29 00:34:58 computer name set to Config1430VM0

2010-01-29 00:34:59 suffix = current primary DNS, new primary DNS suffix = alpha.kaplaninc.com

2010-01-29 00:34:59 main setting suffix DNS for alpha.kaplaninc.com

2010-01-29 00:34:59 checking if marker file C:\WINDOWS\autoconfig-109719069 exists

2010-01-29 00:34:59 marker file does not exist

2010-01-29 00:34:59 running command = "C:\Program Files (x 86) \VMware\VMware"-cmd 'info-get guestinfo.vsla.customizationscript '.

29/01/2010-00:34:59 failed to execute the command, command output value: not found exitcode:1

2010-01-29 00:34:59 running command = xcopy "sysprep\Win2k3_64'"C:\sysprep"/ S/E/Y

2010-01-29 00:34:59 the command succeeded, output from the command: sysprep\Win2k3_64\deploy.chm

sysprep\Win2k3_64\factory.exe

sysprep\Win2k3_64\readme.txt

sysprep\Win2k3_64\ref.chm

sysprep\Win2k3_64\setupcl.exe

sysprep\Win2k3_64\setupmgr.exe

sysprep\Win2k3_64\sysprep.exe

sysprep\Win2k3_64\sysprep.inf

sysprep\Win2k3_64\wfinf_guide.doc

9 file (s) copied

2010-01-29 00:34:59 command = cmd /c copy "Customize - guest.exe" "C:\sysprep\i386\$OEM$" / y

2010-01-29 00:34:59 command execution failed, result of the order: the system cannot find the path specified.

0 file (s) copied.

ExitCode:1

2010-01-29 00:34:59 cannot copy utility for customizing the comments to C:\sysprep

2010-01-29 00:34:59 error customize the guest operating system"

Here, any help would be greatly appreciated I have a quality assurance team to test the 2003 64 bits and at the present time, they are unable to do so because they do not receive an IP address from the scope of the Labmanager.

Thank you

Nadine

You are missing something:

C:\sysprep\i386\$OEM$

This file should be present in the directory SYSPREP on the Lab Manager, if not, then something is missing.  I believe that Lab Manager that creates during Setup, but you can do ths following

First of all, we need to make a folder path that looks like this

sysprep\Win2k3_64\i386\$ OEM$

In the oem folder, make a txt file named:

Cmdlines.txt

Open the file and just put this in it:

\[Commands]

'TAG_RUN_CUSTOMIZATION_EXE '.

This should replicate to have the correct file:

C:\Program VMware Lab Manager\Tools\CustomizeGuest\Windows\Sysprep\Win2k3_64\i386\$OEM$\cmdlines.txt

(Note that your way this may differ on the Lab Manager server)

Once this is done, you will need to rebuild the sysprep packages before deploying again.

Note, you will need to each sysprep folder path too.

Kind regards

EvilOne

VMware vExpert 2009

NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

Tags: VMware

Similar Questions

  • AutoPlay does not work, Windows 7 Ultimate 64-bit

    I have Windows 7 Ultimate 64 bit on my gateway SX 2800, AutoPlay does not work with anything, DVDs, CDs, thumb drives, nothing. When I got my PC it had Vista Home Premium 64-bit and AutoPlay works great, now that I've upgraded to Win7 it doesn't. I went through the steps in Control Panel to configure automatic execution, but nothing helped. Help, please, thank you, Ted.

    See this link-

    http://Windows.Microsoft.com/en-in/Windows7/Troubleshoot-AutoPlay-problems

    If she does nothing then run SFC

    1. open an elevated command prompt.

    2. in the elevated command prompt, type sfc/scannow, and then press enter

    _____________________________________________________________________________________________________________

    Telloin

  • Lenovo battery Z50 - 70 does not load Windows 8% 10

    Hi lenovo Z50-70 battery does not load Windows 8% 10

    I uninstalled the old Yang APP and reinstalled this

    were of no irrelevance that even once and adde the application in the windows store "parameters of Lenovo.

    And it does not load beond 8%

    A have you tried a new charger did not help

    text is pretty funny to 8% and 2 min at full load :-)

    Try opening the energy manager and click on settings, click on conservation mode to turn it off, then unplug the power cord and plug it back again and you should see the battery load again.

  • Winows lost password does not open windows

    Wind ows 2000 password lost does not open windows

    Keep passwords secure - Microsoft on passwords strategy
    http://support.Microsoft.com/kb/189126

    What to do if you forget your Windows password:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  • "This product does not support Windows NT

    I'm trying to install my Carmen Sandiego game on my Vista computer.  This drive worked fine on my XP computer.  Unfortunately, my XP is dead and I am now a Vista user.  I inserted the disc, started the installation, and then all of a sudden the installation stopped dead and the message "this product does not support Windows NT" jumped on my screen.  What I want to know is what does this mean mean and how do I get around it to install my perfectly good and entertaining game on my computer?

    Use the XP Compatibility Mode

  • I have a Windows XP Home Edition, which does not list if it's 32-bit or 64-bit

    I have an OEM Windows XP Home Edition, which does not list if it's 32-bit or 64-bit. How do I know what

    To check if your XP operating system is 64-bit, you only have to right click on "My computer" and select 'Properties' to display 'system properties '.   If your XP operating system is XP Professional 64-bit, 64-bit will be indicated in the information displayed in the general tab.  However, XP 32 bit operating systems won't have 32-bit, there is no information about this particular point at all.  The XP Home Edition will be 32-bit, but this information does not appear.  XP Professional, however, can be either 32-bit or 64-bit.  If it is 64-bit, it will be indicated on the general tab of the system properties. However, if it is XP Professional 32-bit, nothing is there to indicate that the operating system is 32-bit.

    Vista and Windows 7, unlike XP, OS will indicate if they are 32-bit or 64-bit.

  • MFC - 290C scanner does not. Windows error solution

    MFC - 290C scanner does not. Windows error solution

    Hello

    ·        You did changes to the computer before the show?

    ·        If it works much earlier?

    ·        What is the exact error message you get?

    I suggest that you follow the steps in the link and check if it helps you to solve the problem:

    http://www.brother.com/E-FTP/windowsvista/us.html

  • Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

    Hello.
    My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

    Error message:
    "Signing of the problem:
    Problem event name: APPCRASH
    Application name: TrustedInstaller.exe
    Application version: 6.0.6002.18005
    Application timestamp: 49e01af1
    Fault Module name: wcp.dll
    Fault Module Version: 6.0.6002.18005
    Timestamp of Module error: 49e0380e
    Exception code: 80000003
    Exception offset: 0013b 972
    OS version: 6.0.6002.2.2.0.768.2
    Locale ID: 2057
    Additional information 1: fcbe
    More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
    3 more information: 93a 4
    "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

    Update history shows a number of updates that haved 'impossible' to install accordingly.
    Any ideas how to solve this problem for all my PC install Windows updates pending?

    Thank you very much!

    Hi Spoon579,

    Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here

  • Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

    Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

    Hello

    Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
    Cihan

  • Computer does not load Windows after reset after installing HP-J6413

    Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

    Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

    Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

    Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

  • my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

    my computer with windows broken and now my new computer does not have windows, is it possible to get windows on my new computer from my old?

    Hello

    You tell us what type of license you have.

    If the former was preinstalled, NO, you cannot transfer it.

    Read this information:

    If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

    OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

    The above applies also to OEM system builders licenses.

    License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

    And retail licenses also can be installed on a machine at one time.

    ___________________________________________________

    And please read this, you can:

    http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

    See you soon.

  • Windows does not ACTIVATE WINDOWS can't

    PLEASE HELP ME!

    I did a restore and recovery backup because only my WINDOWS 8 stopped to update and gave me problems with speed. I did everything you can imagine. I even run the tweaking.com from windows to check for problems.

    Now the computer does not activate WINDOWS and gives me this message, please activate windows... I click top then says Windows can not be activated, please contact Microsoft Support.

    I have a question and problem and I really need to know how to operate. If I have to reset the computer and reinstall Windows (which hopefully livery) please let me know. At this point the computer is not activate windows and is a real problem

    I appreciate your response.

    Run a full scan with Malwarebytes and AdwCleaner , and then run file System check (SFC) Scan and repair the filesystem - Microsoft Community.

    Uninstall any antivirus bloatware, use built-in Defender.  Use the special tool to uninstall any inflated AV: uninstallers (removal tools) for common - antivirus ESET Knowledgebase software

    Tweaking registry cleaners and the suites (not counting as CCleaner) ruin Windows.

    I would try first to restore the system to a point where he was running better, or if it does not help then refresh or reset: How to refresh, reset, or restore your PC - Windows help

    As a last resort, you can follow this excellent tutorial to make an own 8.1 Windows Installer which puts the quality of installation in your own hands you and keep.  Just stay away from Tweaking suites, stick with integrated antivirus, Defender, keep everything off Startup tab in Manager tasks, watch your freeware installs like a Hawk of snitches, periodically scan with Malwarebytes and AdwCleaner

  • 8 window does not accept windows updates!

    I recently downloaded windows 8 and does not receive windows updates.  This does not prevent my installation things like itunes!  I've tried everything I can think of, but nothing seems to work.  Anyone know why?  I disabled the firewall, I tried windows update diagnosis, research on windows update for updates and does not display anything, I tried virus checking.  I am at a loss and is about to throw the computer and get a woman in the place!

    Hello

    Thanks for posting your question on the Microsoft Community.

    As you've already tried several troubleshooting steps, I suggest that you try to reset the Windows Update components. This clears the cache to update and will allow windows to check for each update is available on our server. If an update is found is not installed, which will appear under available updates.

    I suggest that you follow the steps below and try to reset the Windows Update components:

    1. Press Windows + X key.
    2. Click on (Admin) command prompt.
    3. Disable Windows Update services. Type the following commands and press on enter after each line
      1. net stop bits
      2. net stop wuauserv
      3. net stop appidsvc
      4. net stop cryptsvc
    4. Reset update components. Copy the following text and paste the same in the command line window.
      1. Ren %systemroot%\SoftwareDistribution SoftwareDistribution.bak
      2. Ren %systemroot%\system32\catroot2 catroot2.bak
    5. (Note: shortcut keys do not work in the Windows command prompt, please use right click to paste these codes.)
    6. Restart the Services. Type the following commands and press on enter after each line:
      1. net start bits
      2. net start wuauserv
      3. net start appidsvc
      4. net start cryptsvc

    Try to check the updates now, let us know if you encounter error messages.

    Hope this information is useful. Just reply with the results and if you need help or have any other questions about Windows, we're here to help.

  • Windows 8 does not support Windows Mobile Device Center 6.1 and 6.5?

    Windows 8 does not support Windows Mobile Device Center 6.1.    Anyone know of any solution to the connection on Windows 8 terminals with Windows Mobile 6.1?

    Hello Manu,

    Thanks for posting your query in Microsoft Community.

    From the information you have provided, I understand that you need information on Windows Mobile Device Center for Windows 8. I will certainly give you with this information.

    Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista and Microsoft Windows 7.

    Windows Mobile Device Center 6.1 is currently available for the following versions of Microsoft Windows Vista.

    • Windows 7 Ultimate
    • Windows 7 business
    • Windows 7 Professional
    • Windows 7 Home Premium
    • Windows 7 Starter
    • Windows Vista Ultimate Edition
    • Windows Vista Business
    • Windows Vista Business
    • Windows Vista Edition Home Premium
    • Windows Vista Home Basic
    • Windows Vista Server

    See the link.

    http://support.Microsoft.com/kb/931937/en-us

    If you face problems more when working with Windows Mail on the Microsoft Community Forum.

     

  • ERROR: This Setup program does not support installation on a 64-bit Windows

    I just bought the first items 14 and trided to install it, but got: "ERROR: this Setup program does not support installation on a 64-bit Windows operating system." Please download the 64-bit version of first Elements". So, I know that I must have downloaded the wrong version. (We are still in 1995, I thought that these applications have been more intelligent these days...) SO, how can I do now? Is it possible to download the right version and use the same license number? Need help how to proceed!

    You can download the 64-bit link version:

    Download first Elements | 10, 12, 14, 11, 13

Maybe you are looking for

  • "Scan to computer" the printer only works for admins

    HP Officejet 6700, OS X Lion. Latest version of the software. Only admin users can scan the printer using the screen touch "Scan to Computer".  The non-admin users get communication errors. The computer is listed and after choosing works very well if

  • What is the current Qosmio possible better I can buy?

    Hi, only just joined the forum, I run a pc/mainframe gps/cell phone repair criticism taken are *, uk, I (for my sins) microsoft ex-employee left to go it alone 13 years ago.I became addicted to Qosmio, now own 8, my latest acquisition has Brand New F

  • Ethernet does nothing. Does not work.

    I use both Mac simultaneously, both running El Capitan. While they were the two iMacs I couldn't network with Ethernet, manually, automatically or any other means. I had to share files via Dropbox. Now I replaced an iMac with a Mac Pro, but the probl

  • Qosmio X 770 turns on but the screen remains blank

    So my Qosmio X 770 turns on but the screen remains blank, it was randomly turning every so often, but now it is just blank. The hd works fine again, I tried to plug it into a TV to see if it works, but no signal is found. I was informed by a friend t

  • Switch Gigabit WRT610N issues [issues]

    Hi all! I have a WRT610N, a Modem ADSL Philips. and two computers (both using the Gigabit adapters) I connected the Modem ADSL Philips (with 100 Mbps switch) with the WRT610N (via the port of bridge) and everything works like a charm... I have Intern