Windows 3.0 for device 3.3.2.2 ACS database
I have 3.0 for windows GBA and bought 2 ACS devices to replace ACS Windows. Is it possible to load the windows config ACS 3.0 for ACS 3.3.2.2 device
Yes. The backup of the ACS 3.0 configuration, copy the file to an FTP server restore it on the device.
If the restore fails, you may need upgrading to ACS 3.3 can back up and restore.
Tags: Cisco Security
Similar Questions
-
NetBIOS and Windows Legacy Machines
Can someone link me to some documents that NetBIOS is required for devices inherited from Windows to function properly?
Maybe even a link to a Microsoft web page that States this as well.
I understand the security risks inherent with opening ports 135 and 139, but they are needed within the network for some devices to function correctly, just need a documentation that indicates that.
Hello
See the links below and check if that helps.
http://TechNet.Microsoft.com/en-us/library/bb727013.aspx
http://TechNet.Microsoft.com/en-us/library/cc940063.aspx
http://TechNet.Microsoft.com/en-us/library/cc738412 (WS.10) .aspx
Thank you
-
Windows XP driver needed for device: Realtek High definition audio
I have a netbook with windows xp home SP3.
I can't get the driver for the following device:Audio device on High Definition Bus Audiothe device id is as follows:HDAUDIO\FUNC_01 & VEN_10EC & DEV_0269 & SUBSYS_144DC629 & REV_1002\4 & 68(C) 253 & 0 & 0001Go to your computer manufacturer's support web site and search for the Windows XP drivers for your specific model number.
If there are Windows XP drivers, then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, LAN card drivers, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
High-definition audio is also associated with graphics cards to verify ATI or Nividia Modila (a the letter M to the end for the model number of card) driver updates.
Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
Windows cannot be installed on the drive needs the driver for device
Transition from XP to Windows 7 Edition Home Premium. I'm following the instructions to upgrade to XP.
Primary IDE Channel - how to find what device needs a driver and then go in and install it?
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the drivers card mother/chipset (F6 during installation of Windows 7), SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
HP 255 G3: Unknown device after upgrading Windows 8.1 for Windows 10
Hello
I have laptop computer n HP 255 G3 and I just upgraded Windows 8.1 for Windows 10.
An unknown material element occurred in the Device Manager with the ID of 'ACPI\VEN_ASD & DEV_0001' material.
Could you please help me install them correctly?
Kind regards
Joey
Its your graphics driver from AMD.
See Paul's response
-
I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)
Hello
I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:
http://support.Microsoft.com/kb/310123
It will be useful.
-
Original title: the answer useful?
Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Windows Calendar sync for mobile device: iPhone
Please HELP - I'm at the end of my synchronization attempt roll my Windows calendar with my iPhone details-
what I am doing wrong?
These two entities are not compatible with each other?
Please in advance for any help you can provide: o)!
See if any of these links you get. Do you receive a specific error message that can help find your problem?
I need help etc calendar synchronization to outlook 2007 like PDA was previously synchronized to earlier softwar.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/7696e5e3-32df-4CD1-aa6c-29b9d95217cdTry your luck in a dedicated too Forum.
HowardForums: Your Mobile phone community & resource > manufacturer Discussion
http://www.HowardForums.com/index.php?s=242da706b4806a52defc0ffd6534e7d1&Windows Mobile Device Center - Troubleshooting
http://www.PocketPCFAQ.com/FAQs/WMDC/t-shoot-WMDC.htmWindows Mobile Device Center - view of whole connection
http://www.PocketPCFAQ.com/FAQs/WMDC/connectoverview.htmcannot sync cellphone with Vista; The mobile device Center indicates first of"binding", after a while "error."
http://social.Microsoft.com/forums/en-us/windowsmobileactivesync/thread/331328a5-997f-4F7C-B411-f6c2f007613d"Lead story on October 23 of Scott Dunn, who described workarounds to help sync you Outlook contacts and calendars with an iPhone, failed to provide detailed instructions for users of Blackberry, Windows Mobile and other devices.
The best way to merge your contacts with the iPhone
http://www.WindowsSecrets.com/2008/10/23/02-the-best-way-to-merge-your-contacts-with-iPhoneFortunately, the procedure to merge data with these other phones address books requires only the synchronization software provided with your mobile device". Read on...
Synchronize your Outlook and mobile phone contacts
http://WindowsSecrets.com/comp/081106/ -
Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?
# You have need Vista compatible drivers - it's the only way it will work. Installing bad drivers can even to hurt the unit or even your system to not try. Get a new USB device that works with Vista, and has the correct drivers.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Separated from this thread.
Hello
I'm faced with the same question. I went to settings of your laptop and ran the recovery, but it did not help. I went to Device Manager and I noticed an error: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed. Tried to fix that with an alternative of Microsoft Community (http://support.microsoft.com/mats/hardware_device_problems/?wa=wsignin1.0), but the issue could not be resolved. I don't know if they are related, but I think so. Spent so much time trying to solve this problem and would be really grateful for the help. Have had the computer for less than 3 weeks...
Ewa
Hi Ewa,
Thanks for the reply.
I suggest you to update the drivers for the chipset of your computer and check if it helps. You can use the link below. Select the appropriate component and the operating system from the list. The link given below is for Lenovo 11 2 yoga, if you have any other device then please provide us with the exact model number or select the correct model number.
As you mentioned that the other two USB ports work correctly, according to me is not a problem with the driver. It seems to be a hardware problem.
Let us know the status.
-
HP 15-r007tx = pci device sm bus controller drivers for devices and missing
Well Hello hp. I bought a 15-r007tx hp Tower a week back. My os is windows 8.1. It's a duplicate operating system.
in fact, I was downloading my drivers of hp's official website and I noticed that the sm bus controller and drivers pci for my knees disappeared. I searched on the Web site by changing the region, but it didn't help out me.
can you please give me the link to download my sm bus controller and the drivers for pci devices... Please...
Hello:
You need these drivers for devices.
SMBus:
PCI:
-
Windows 7 drivers for g6-2335us
Hello... I bought and HP Pavilion with Windows 8 and after months of playing with him decided to replace it with Windows 7. HP support does not list drivers fo the G6-2335us. Can someone tell me what I need drivers and where to find them?
WARNING *.
HP does not recommend installing Windows 7 on a computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.
Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.
You should ENABLE 'Secure Boot' and 'Legacy Support' in the 'BIOS Setup boot secured' on the settings below page before you may try to install Windows 7;
In addition, as the hard drive is partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" in the start menu "F9". If "UEFI - CD/DVD drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.
I suggest to use a disc of Windows 7 SP1 for the best installation experience. If you need a Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive.
Here are the specifications of your laptop HP Pavilion 2235us g6. For your model, HP seems to provide that drivers of Windows 8. Most of the Windows 7 driver from the drivers PC laptop HP Pavilion 2123us g6 page should work on your computer from HP g6-2235us.
Thanks for posting to the Windows Device Manager "Hardware ID" additional missing or unknown devices, as shown in the example below.
Please click the White Star of KUDOS to show your appreciation
-
Windows 7 drivers for Bluetooth adapter
Good evening
I have a HP Envy M6 1150sa on thich I installed Windows 7 (shipped with Windows 8).
I have trouble getting the bluetooth device to maintain a connection with any device at all. I can scan for devices, connect to the device, but as soon as the wizard is closed the unit disconnects and remains disaconnected (grayed out in devices and printers). This is the case with multiple devices and the same thing happens every time. The same devices will be fixed to any other system bluetootch no way out other than this system so I guess that its associated software.
People could guide me to the best driver to use for the bottom hardware ID?
USB\VID_8087 & PID_07DA & REV_7869
USB\VID_8087 & PID_07DAThank you very much
Paul
Hello:
Similar to this is a feature of Intel bluetooth...
See if this driver works...
BTW... you should be able to use all the W7x64 drivers and software of the model that I posted the above BT driver.
DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES
-
Can you please tell me where I can download a driver Windows 8.1 for Controller of Bus SM on a HP Pavilion 14-n207tx
It is the only device that 8.1 Windows can't find a driver for - I tried to update the driver software in the device to her manager and he doesn't find anything.
Thanks in advance
Install the Intel® Chipset Device Software setupchipset.exe
-
Windows 7 drivers for HP Pavilion Notebook - 17-f151nr
Help, please. I can't find drivers for Windows 7 for my HP Pavilion Notebook - 17-f151nr. USB, Wi - Fi, Lan does not work!
Hello:
Here are links to the drivers you need...
USB:
LAN: Download and install the 3rd driver on the list...
There is no information available online about what model of wireless card to your PC.
Please do the following so I can understand that, and then I'll post the link to the wireless card driver you need.
Go to Device Manager. There should be a category of other devices containing a list of devices that need drivers under this category.
The wireless card is labeled as a network controller.
Click the network controller device, and then click the Details tab in the upper part of the window of network controller device.
Now you should see a drop-down list of property and it is set by default to the Description of the unit.
On this list and select the second element (Hardware ID).
After the first string of characters you see in the window.
Maybe you are looking for
-
Help please! Untrusted connection no transmitter channel provided...
connection of unapproved Firefox no issuer channel was provided... I can't navigate almost any Web site without getting this error. I tried setting the date / clock and I delete the cert8. data in the firefox profile. Nothing works. Also, when I find
-
How can I copy parts of the text of a pdf file in preview?
How can I copy parts of the text of a pdf file in preview? For example, the beginning and the end part of a passage - copy not a few sentences in the Middle
-
Hello, first of all, I wanted to apologize for my English, I write good English, sorry. I have a tablet of 10 Omni, when I turn off the Tablet by clicking on the option 'Disable' in Windows 8, sometimes light near the camera is turned on but turned o
-
Satellite M40X - BSOD caused by ATI2DVAG. Win XP SP3 DLL
Hello I have a laptop Tosiba Satellite M40X. When the ATI display driver is installed, there is a blue screen caused by a loop of infitive caused by the ATI2DVAG. DLL with the OEM Version of Windows XP, the machine is working no more. When a full Win
-
Will be on a damage of PFI line 24V 9188 chassis?
I expect no trigger for the acquisition of data with a chassis 9188, but I want to use to send the trigger pulse (servo) operation to 24V. This will damage the chassis? Should I step the voltage until the TTL level?